I need pictures and serious help!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tim21391 · 12-12-2008, 12:02 AM

well we have been working on my truck and so i was taking a break and took a pick hammer and hit rockers to see if they were shot...so lets just say its swiss cheese now.... i need pics of a good inner rocker...like the seems and where to weld to attach it... i would like pics of good cab supports preferably all four supports... and pics of outer rocker seams... please leave a bunch on here please... i have to replace inner rockers..outer rockers... and cab supports.. and in what order should they be done in and how.. i havent learned this at the body shop yet..so thats why im asking...

tim21391 · 12-12-2008, 11:13 AM

all i need for now is a pic of inner rockers and cab supports.. like where nothing is rusted out...were everything is all in place..mine are all rusted out and i dont know what needs to be cut out and what needs to stay...any help is wanted. thanks

Willys47 · 12-12-2008, 11:24 AM

if you look through this site you will find all kinds of pic try the project section for a start lots there.

tim21391 · 12-12-2008, 03:49 PM

is there a link to it anywhere?

71 burb · 12-12-2008, 07:12 PM

should be one in faq's i think

Willys47 · 12-12-2008, 08:45 PM

go to the bottom of the page and click on forum jump and look for it there

smoked68 · 12-12-2008, 09:16 PM

What kind of bike are you dancing around there??

100%Chevy · 12-12-2008, 09:27 PM

I have a bunch of pics in my album below:

Just click on it!

http://www.picturetrail.com/100chevy

Mike.

71swb4x4 · 12-12-2008, 09:30 PM

You should buy Ebfabman's videos on floorpan and rocker replacement. That will definitely make the job easier for you.

Cyclone · 12-12-2008, 10:36 PM

more

**88JRFAN** · 12-12-2008, 10:49 PM

Good one Cyclone, glad to help. Going to go over and help Tim out tomorrow. We have been trying to meet up for the last week or so. Hope to get him going tomorrow. Daren

12-12-2008, 12:02 AM	#1
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	I need pictures and serious help!! well we have been working on my truck and so i was taking a break and took a pick hammer and hit rockers to see if they were shot...so lets just say its swiss cheese now.... i need pics of a good inner rocker...like the seems and where to weld to attach it... i would like pics of good cab supports preferably all four supports... and pics of outer rocker seams... please leave a bunch on here please... i have to replace inner rockers..outer rockers... and cab supports.. and in what order should they be done in and how.. i havent learned this at the body shop yet..so thats why im asking... __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

12-12-2008, 11:13 AM	#2
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: I need pictures and serious help!! all i need for now is a pic of inner rockers and cab supports.. like where nothing is rusted out...were everything is all in place..mine are all rusted out and i dont know what needs to be cut out and what needs to stay...any help is wanted. thanks __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

12-12-2008, 11:24 AM	#3
Willys47 Registered User Join Date: Dec 2007 Location: Nanaimo B.C. Posts: 604	Re: I need pictures and serious help!! if you look through this site you will find all kinds of pic try the project section for a start lots there. __________________ I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!!

12-12-2008, 03:49 PM	#4
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: I need pictures and serious help!! is there a link to it anywhere? __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

12-12-2008, 07:12 PM	#5
71 burb Registered User Join Date: Mar 2008 Location: mount olive al Posts: 176	Re: I need pictures and serious help!! should be one in faq's i think

12-12-2008, 08:45 PM	#6
Willys47 Registered User Join Date: Dec 2007 Location: Nanaimo B.C. Posts: 604	Re: I need pictures and serious help!! go to the bottom of the page and click on forum jump and look for it there __________________ I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!!

12-12-2008, 09:16 PM	#7
smoked68 Registered User Join Date: Oct 2006 Location: Rock Hill, SC Posts: 421	Re: I need pictures and serious help!! What kind of bike are you dancing around there?? __________________ 1968 chevy shortbed, Dark Shadow Gray 4 bolt 383 Stroker,Weiand Super Charger, disc brakes, 9 inch, 391 gear, 20" Eagle wheels, muncie 4 speed/ Hurst shifter, 4/7 drop, Hedman midlengths, 3 inch exhaust w/ 2 chamber flows. 1966 Mustang with 306 roller, c-4, 9 inch Detroit locker rear. 1965 Fastback Mustang w/347 stroker, top loader 4spd, 9 inch detroit locker. 1966 Mustang coup, 306 roller, c4, 9 inch. 65 Cobra, 427, T6oo, 9inch, of course. First gen Hayabusa, airbox mod and running 2 exhaust cams.. Zoom Zoom Zoom

12-12-2008, 09:27 PM	#8
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: I need pictures and serious help!! I have a bunch of pics in my album below: Just click on it! http://www.picturetrail.com/100chevy Mike.

12-12-2008, 09:30 PM	#9
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: I need pictures and serious help!! You should buy Ebfabman's videos on floorpan and rocker replacement. That will definitely make the job easier for you. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

12-12-2008, 10:36 PM	#10
Cyclone Registered User Join Date: Oct 2004 Location: Sonoma, CA Posts: 318	Re: I need pictures and serious help!! more

12-12-2008, 10:49 PM	#11
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: I need pictures and serious help!! Good one Cyclone, glad to help. Going to go over and help Tim out tomorrow. We have been trying to meet up for the last week or so. Hope to get him going tomorrow. Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.