how to put power stering on a 67 gmc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

camaney · 11-13-2008, 09:09 PM

ok i have 67 gmc shorth bed, also a 70 chevy shorth bed my chevy has power stering my gmc does not i notice the frame where the stering gear is has a indent for the chevy, the gmc does not how do i make it to fit and what years should i look for? thanks

68gmsee · 11-14-2008, 10:55 AM

Howdy... I have a 68 and I just used some washers to make up for the lack of indent on the frame. However, if you do a search under this forum, you will find some good info.

I believe mine came out of a late 70's or early 80's truck.

As for the indent, some guys have just banged the frame with a big hammer, others have cut, some use a torch to create the indent. I saw one that had an adapter for a 66 chevrolet. Not sure where he got that but it looks well made.

Here's a bump for you in case someone has more ideas...

jorgensensc · 11-14-2008, 11:34 AM

Careful using washers to space it out. It actually throws off the steering column line and can cause gearbox bearing wear, etc. Just a little heads up. If it were me I would heat and hammer the indention in. That seems the best way in my opinion.
Shawn

68gmsee · 11-14-2008, 06:31 PM

Quote:

Originally Posted by jorgensensc

Careful using washers to space it out.

True, true... In my case, my 68 has somewhat of an indent, just not enough. So a couple of washers was all I needed.

The bracket that I saw someone use on a 66 will certainly bring it out more at an angle. I believe if it was extreme, I would use some sort of swivel connector on the steering shaft like the hotrodders do.

Otherwise, I agree that creating your own indentation is the route to go.

68 C-10 KID · 12-13-2008, 01:46 AM

a place called dans classics sells the kit to convert it. very chep

**VetteVet** · 12-13-2008, 11:22 AM

Just the FAQs for you
http://67-72chevytrucks.com/vboard/s...d.php?t=216886

11-13-2008, 09:09 PM	#1
camaney Registered User Join Date: Feb 2008 Location: sacramento california Posts: 204	how to put power stering on a 67 gmc ok i have 67 gmc shorth bed, also a 70 chevy shorth bed my chevy has power stering my gmc does not i notice the frame where the stering gear is has a indent for the chevy, the gmc does not how do i make it to fit and what years should i look for? thanks

11-14-2008, 10:55 AM	#2
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: how to put power stering on a 67 gmc Howdy... I have a 68 and I just used some washers to make up for the lack of indent on the frame. However, if you do a search under this forum, you will find some good info. I believe mine came out of a late 70's or early 80's truck. As for the indent, some guys have just banged the frame with a big hammer, others have cut, some use a torch to create the indent. I saw one that had an adapter for a 66 chevrolet. Not sure where he got that but it looks well made. Here's a bump for you in case someone has more ideas...

11-14-2008, 11:34 AM	#3
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: how to put power stering on a 67 gmc Careful using washers to space it out. It actually throws off the steering column line and can cause gearbox bearing wear, etc. Just a little heads up. If it were me I would heat and hammer the indention in. That seems the best way in my opinion. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

12-13-2008, 01:46 AM	#5
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: how to put power stering on a 67 gmc a place called dans classics sells the kit to convert it. very chep

12-13-2008, 11:22 AM	#6
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,719	Re: how to put power stering on a 67 gmc Just the FAQs for you http://67-72chevytrucks.com/vboard/s...d.php?t=216886 __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.