![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2008
Location: St Louis, MO
Posts: 533
|
72 blazer master/booster upgrade help
i have a 72 blazer and i was told that for this upgrade i could use a mid 80's 3/4 ton booster and master cyl kit. how much of this will be close to bolt on and how much will i have to fab something together. i am looking to in the future go to 14 bolt rear and dana 60 front. also i already have problems with the one in my blazer now, as well as i will be putting some lift and bigger tires on when warm weather comes back. any help on this would be great
![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2000
Location: Modesto, CA
Posts: 1,842
|
Re: 72 blazer master/booster upgrade help
Duno?
I used a master/booster setup from a 72K30 to upgrade my 72K5 and it bolted right up. Keep in mind the 1Ton master's plumbing is opposite to the P-valve. Here is a pic of my 1Ton setup. ![]() Try a search here there are alot of threads covering this...
__________________
1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|