WTB: Radiator Support to Frame Hardware - The 1947 - Present Chevrolet & GMC Truck Message Board Network

myoldchevytruck · 12-16-2008, 10:40 AM

Happy Holidays Everyone:

I'm on the hunt for a few things.

1. Looking to buy the 67'-68' Radiator Support to Frame Hardware. Nuts, Bolts, Washers, Spacers, etc. for both sides.

2. Breather for 71' rearend. (guess it's a 1 way check valve type breather that is on the front side of the pumpkin)

I'm also checking locally. Thanks, Harry

**jaros44sr** · 12-16-2008, 11:39 AM

Quote:

Originally Posted by myoldchevytruck

Happy Holidays Everyone:

I'm on the hunt for a few things.

1. Looking to buy the 67'-68' Radiator Support to Frame Hardware. Nuts, Bolts, Washers, Spacers, etc. for both sides.

2. Breather for 71' rearend. (guess it's a 1 way check valve type breather that is on the front side of the pumpkin)

I'm also checking locally. Thanks, Harry

I found that breather on a corvette site in Pa.

myoldchevytruck · 12-16-2008, 12:14 PM

There's a bag with the # 35746 marked Rear Vent Tube in your pic. Are you selling it? If not, do you remember that site? Thanks

**jaros44sr** · 12-16-2008, 11:19 PM

I just bought it

...wwwcorvetteamerica.com, if this doesn't work I'll give you a phone number

That's the part number

**jaros44sr** · 12-20-2008, 12:20 PM

Any luck locating the part?

12-16-2008, 10:40 AM	#1
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	WTB: Radiator Support to Frame Hardware Happy Holidays Everyone: I'm on the hunt for a few things. 1. Looking to buy the 67'-68' Radiator Support to Frame Hardware. Nuts, Bolts, Washers, Spacers, etc. for both sides. 2. Breather for 71' rearend. (guess it's a 1 way check valve type breather that is on the front side of the pumpkin) I'm also checking locally. Thanks, Harry __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

12-16-2008, 12:14 PM	#3
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: WTB: Radiator Support to Frame Hardware There's a bag with the # 35746 marked Rear Vent Tube in your pic. Are you selling it? If not, do you remember that site? Thanks __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

12-16-2008, 11:19 PM	#4
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,620	Re: WTB: Radiator Support to Frame Hardware I just bought it...wwwcorvetteamerica.com, if this doesn't work I'll give you a phone number That's the part number __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 12-16-2008 at 11:20 PM.

12-20-2008, 12:20 PM	#5
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,620	Re: WTB: Radiator Support to Frame Hardware Any luck locating the part? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.