10 & 12 bolt u-joint the same? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

low 84 10 & 12 bolt u-joint the... 02-28-2003, 02:51 PM

RockHQ I believe it is different. 02-28-2003, 03:17 PM

gchemist Unless you use the 12 bolt... 02-28-2003, 03:17 PM

ElGracho The 12 bolt originally used a... 02-28-2003, 04:30 PM

low 84 so i will need to use the two... 02-28-2003, 10:03 PM

BaggedC10 My 12-bolt rear-end has the... 02-28-2003, 10:39 PM

02-28-2003, 03:17 PM	#1
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Unless you use the 12 bolt drive shaft you need a different u-joint. Part number 372 Spicer from Napa if I remember correctly. The caps for both are different sizes. To convert to the 12 bolt, you need a joint with two large caps and two small caps. I know, I destroyed one already and replaced it with the Spicer. The spicer U joints seems to be tighter too. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

Bookmarks

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -4. The time now is 09:09 PM.



Register or Log In To remove these advertisements.