Got my new serpentine system in - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cameeks · 12-22-2008, 06:54 PM

It came out of a '92 Chevy truck from what I was told. I put pictures of what I have now and what is with the kit. What do I need to do to get my alt and P/S pump to hook up (see pic below)? Also what is the Black bracket for? If it goes behind the P/S pump and mounts to the front of the block can I cut off the two ears that go to the headers? I know I need a reverse rotation W/P from the same year truck.

The alt and P/S I have now

BP68 · 12-22-2008, 08:52 PM

Chec out my build thread for a pic of that black bracket with the ears cut off to clear headders. I have the same setup

If you are going with the great upgrade to serp. then I would also get adaptors for the new model PS pump to you stock steering gear, and also rewire it for the new style Alt.

cameeks · 12-22-2008, 10:18 PM

How do I rewire it? the alt has the plug with it and it just has one brown wire comming out of it. Also where can I get the adapters from?

cameeks · 12-23-2008, 08:17 AM

Is this what I'm looking for?

Link

my67chevytruck · 12-23-2008, 09:08 AM

I have heard that summit / jegs sell an adapter that takes it from the old style to the new 1 wire alternator. I will be needing to do this soon. As far as the PS pump. I recall that we are suppose to reuse the hardline, and unscrew the other from the back of the new PS and screw in the line from the old PS pump, so it still mates to the ps gearbox. Hopefully someone will correct me if my oldtimers is kicking in.

my67chevytruck · 12-23-2008, 09:13 AM

forgot i saved this for future reference: http://67-72chevytrucks.com/vboard/s...d.php?t=233335

Post #6,#7 talk about the adapter we will need.

NWD02 · 12-25-2008, 02:26 AM

Feel free to see mine. It's off a 94 truck but should be pretty much the same. I haven't wired my truck yet, but I'm going with a complete Ron Francis Wiring Kit.

cameeks · 12-25-2008, 10:54 PM

I just got everything installed and working great. I lucked out and the P.O. installed a newer style power steering pump so I didn't have to change out the fitting. My truck was already upgraded to an internal regulated alternator so I just had to change the plug and go by the web site I posted above. Right now the P.O. used a light bulb under the hood for the alt to work right later I'm going to put in a resister.

cameeks · 12-26-2008, 08:35 PM

Here are some pictures of my install.

FYI put the passenger bracket on first because it will hit the water pump when you try to slide it on the stud in the head.

12-22-2008, 06:54 PM	#1
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Got my new serpentine system in It came out of a '92 Chevy truck from what I was told. I put pictures of what I have now and what is with the kit. What do I need to do to get my alt and P/S pump to hook up (see pic below)? Also what is the Black bracket for? If it goes behind the P/S pump and mounts to the front of the block can I cut off the two ears that go to the headers? I know I need a reverse rotation W/P from the same year truck. The alt and P/S I have now __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules Last edited by cameeks; 12-23-2008 at 12:37 AM.

12-22-2008, 08:52 PM	#2
BP68 Registered User Join Date: Jun 2006 Location: Olive Branch, MS Posts: 824	Re: Got my new serpentine system in Chec out my build thread for a pic of that black bracket with the ears cut off to clear headders. I have the same setup If you are going with the great upgrade to serp. then I would also get adaptors for the new model PS pump to you stock steering gear, and also rewire it for the new style Alt. __________________ 68 C10 Shortbed Fleetside 06 Chevy Ext Cab Fleetside 03 Grand Prix GTP My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=269999

12-22-2008, 10:18 PM	#3
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Got my new serpentine system in How do I rewire it? the alt has the plug with it and it just has one brown wire comming out of it. Also where can I get the adapters from? __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

12-23-2008, 08:17 AM	#4
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Got my new serpentine system in Is this what I'm looking for? *Link* __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

12-23-2008, 09:08 AM	#5
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Got my new serpentine system in I have heard that summit / jegs sell an adapter that takes it from the old style to the new 1 wire alternator. I will be needing to do this soon. As far as the PS pump. I recall that we are suppose to reuse the hardline, and unscrew the other from the back of the new PS and screw in the line from the old PS pump, so it still mates to the ps gearbox. Hopefully someone will correct me if my oldtimers is kicking in. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 12-23-2008 at 09:09 AM.

12-23-2008, 09:13 AM	#6
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Got my new serpentine system in forgot i saved this for future reference: http://67-72chevytrucks.com/vboard/s...d.php?t=233335 Post #6,#7 talk about the adapter we will need. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

12-25-2008, 02:26 AM	#7
NWD02 Registered User Join Date: Oct 2007 Location: Mont Belvieu, Texas Posts: 729	Re: Got my new serpentine system in Feel free to see mine. It's off a 94 truck but should be pretty much the same. I haven't wired my truck yet, but I'm going with a complete Ron Francis Wiring Kit.

12-25-2008, 10:54 PM	#8
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Got my new serpentine system in I just got everything installed and working great. I lucked out and the P.O. installed a newer style power steering pump so I didn't have to change out the fitting. My truck was already upgraded to an internal regulated alternator so I just had to change the plug and go by the web site I posted above. Right now the P.O. used a light bulb under the hood for the alt to work right later I'm going to put in a resister. __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

12-26-2008, 08:35 PM	#9
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Got my new serpentine system in Here are some pictures of my install. FYI put the passenger bracket on first because it will hit the water pump when you try to slide it on the stud in the head. __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.