My 87 Build Thread

[COMP]

what wheels are those ??

[JCampbell]

Originally Posted by Captkaos

It didn't come from the factory that way. 454 engines weren't offered in any K series pickups. The largest engine that came in K series was a 400. 1979 was the last year for a 454 in a 1/2T pickup.

I can't say for sure on the Canadian version, but US is a definite no.

Really? I've been looking for a 454 powered 3/4 ton K20 sub for quite some time.

That might explain why.

[vern350]

we've had a 454 K20 sub before. It was a 78. The rims are 15x8 eagle alloy series 058.

[COMP]

Originally Posted by vern350

we've had a 454 K20 sub before. It was a 78. The rims are 15x8 eagle alloy series 058.

thanks

[andresco50]

Hey good one TRUCK TRAIN!!!:

[vern350]

truck train could be at least 4 more long, but pictures are not around....

[MylilBowTie]

Nice black interior!

[ont_guy_38]

Hey Vern could you leave the red one outside unlocked I could use the rear bumper and the seat.Even better could you remove those pieces and make it a fast easy getaway for me...lol

[vern350]

Well, its on the road. Been able to get lots fo stuff done with this time off from school for the holidays. The torque converted stopped working, it was bone dry inside. Switched transmissions completely just to be sure, used one from a 93 c1500, just switched the tailstock. Since I came across a spare transmission, I decided to use the motor that was in the truck already. Rockers and cab corners were skipped when the truck was repainted a few years back by the previous owner. So It got new corners and rockers for the safety. Couldnt find the correct paint to match, but found something to get by. Also resolved a wiper issue thanks to BLE 'BURBAN. Spent a good amount of time oil spraying the truck before it saw any snow/salt to help prevent corrrison. This truck needed to get on the road so my dads 86 scottsdale can come off the road to be put on a 3/4 ton 4x4 frame. Here it is as it sits.