TN - Trade Blazer/Jimmy SWT for DWT

[LUV2XCLR8]

I really need to sell "Merlot" so I'm fix'n the small things
month by month until I can get it to Daily Driver status.

Turns out the tub is set-up for a DWT. (which is no real
surprise since it is a 71 but I never payed attention)

I have a SWT with Tinted glass. (Both sides and hatch)
it will need cleaned up, repainted, side window seals. I
have the hatch seal already. Top is a 7-8 on a 10 scale
and the hatch is a 9.9 on the same scale. (Small hole
on the flat area around the size of a #2 pencil eraser)
I have plenty of hardware including extras and some
of it has even been blasted and powder coated black.

Sooooo, I want a DWT (White) ready to bolt on, with
a working hatch of course, clear glass is a + but isn't
a deal breaker, & doesn't require any fiberglass work.

To me this seems like a fair trade, if interested reply
HERE 1st, then you can PM me for more info. (If you
PM me before replying here it will be ignored, Sorry)

PS - I also have the SS interior hold down strips

[my67chevytruck]

im guessing thats single wall top and double wall top, but really dont know the differences as how they are setup etc. TTT for ya.

[badpeanut]

I have the white DWT and hatch that used to be on "Merlot" when it lived in SD. I'll trade if there is some way to address the distance issue (I'm located in Jamestown, ND).

[70rs/ss]

I need it here in AZ!! Wanna make a road trip, oh and I have the DWT!!! Please????

[LUV2XCLR8]

I will have to look at each location, miles, and the time
involved to see which one would make more sense. Do
either of you have pictures of the tops in question? (I
will try to upload some of mine later on this week) Cya

[badpeanut]

Originally Posted by LUV2XCLR8

I will have to look at each location, miles, and the time involved to see which one would make more sense. Do either of you have pictures of the tops in question? (I will try to upload some of mine later on this week) Cya

Here is a picture from the day I picked it up. It has been stored inside since then. I can get more pictures this week.

It has factory tinted glass in the sides and hatch. I have all mounting hardware for it. It is in good shape, but the weatherstrip around the side windows where the truck doors close against the hardtop is missing. The hatch handle had issues, so I replaced it with a quality garage door handle with the flapper door in the keyslot to keep the weather out.

[70rs/ss]

I'll try to get some of mine later.

[LUV2XCLR8]

Ice here today, I'll get pic's soon.

[LUV2XCLR8]

I'm off the next 4 days and will have pic's taken and uploaded, ttt