WIW.. factory 68 cruise control - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Livrat · 11-26-2008, 01:47 AM

not quite complete.. missing the vacuum pod and chain that mounts on the firewall, the bracket is there just the pod is missing.. any ideas??

HuggerCST · 11-26-2008, 02:33 PM

What shape is the turn signal lever in? Since it's not complete, I'd say it's worth more parted, but then, I see a couple of pieces that I need.

I'd say $100-175. It's pretty rare, but not many people seem to want factory cruise.

Livrat · 11-27-2008, 02:37 PM

Thanks for the reply.. I will have to go take a look at the lever to see condition.. Which parts do you see that you may need?

HuggerCST · 11-27-2008, 11:22 PM

Mainly the turn signal lever. I don't have mine in front of me, but if I remember correctly, I need the chain clip on the throttle linkage, the brake pedal switch bracket, and maybe a speedometer cable. I'll have to look to be sure. Let me know if you decide to split it up, or a price for all of it. Thanks

Livrat · 12-02-2008, 01:31 AM

Sorry it took me a bit to respond. finally found a some time to remove it from the truck.
The lever has a couple of minor pitts in the chrome and the chrome is coming off on the end..

I would rather sell the entire assembly, If you would consider $150 for all of it.. its yours.. let me know..

Here are a few more pictures.

72armyswbtruck · 12-05-2008, 01:09 AM

I think $150 is too low, there are many on the parts board that have been trying to collect all the parts for a factory cruise and have paid much higher for less.

Mt Man Chad · 12-12-2008, 08:32 PM

I'll take it!

Livrat · 12-12-2008, 10:33 PM

Chad,
I traded it off a week ago.. sorry.. I forgot to delete the thread. Oops.
I do know of another one thats nice and complete.. but spendy! he is asking $450 for it.. ouch..

Huck · 12-17-2008, 06:50 PM

Was this on your glove box build sheet? It was my understanding that cruse control was not offered till 70 or 71 as a replacement for speed warning.

Livrat · 12-17-2008, 11:03 PM

Unfortunately the SPID was gone from the glove box.

**jerry moss** · 12-21-2008, 06:47 PM

it was available from the factory in 68, i had a 68 burb with factory cruise and it was on the SPID. mine also had buddy buckets and shoulder belts too-all factory. up until now i have never seen another one.

72BlckButy · 12-21-2008, 06:53 PM

You learn something new every day.... I'll add this to my list of unique factory options.

LUV2XCLR8 · 12-31-2008, 05:19 PM

I have one, but not sure if I have everything.

Livrat · 12-31-2008, 11:34 PM

Quote:

Originally Posted by LUV2XCLR8

I have one, but not sure if I have everything.

I could post some pictures of a complete 68 unit if you would like to compare it to yours.

11-26-2008, 01:47 AM	#1
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	WIW.. factory 68 cruise control not quite complete.. missing the vacuum pod and chain that mounts on the firewall, the bracket is there just the pod is missing.. any ideas?? Attached Images

11-26-2008, 02:33 PM	#2
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: WIW.. factory 68 cruise control What shape is the turn signal lever in? Since it's not complete, I'd say it's worth more parted, but then, I see a couple of pieces that I need. I'd say $100-175. It's pretty rare, but not many people seem to want factory cruise. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

11-27-2008, 02:37 PM	#3
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: WIW.. factory 68 cruise control Thanks for the reply.. I will have to go take a look at the lever to see condition.. Which parts do you see that you may need?

11-27-2008, 11:22 PM	#4
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: WIW.. factory 68 cruise control Mainly the turn signal lever. I don't have mine in front of me, but if I remember correctly, I need the chain clip on the throttle linkage, the brake pedal switch bracket, and maybe a speedometer cable. I'll have to look to be sure. Let me know if you decide to split it up, or a price for all of it. Thanks __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

12-02-2008, 01:31 AM	#5
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: WIW.. factory 68 cruise control Sorry it took me a bit to respond. finally found a some time to remove it from the truck. The lever has a couple of minor pitts in the chrome and the chrome is coming off on the end.. I would rather sell the entire assembly, If you would consider $150 for all of it.. its yours.. let me know.. Here are a few more pictures. Attached Images

12-05-2008, 01:09 AM	#6
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: WIW.. factory 68 cruise control I think $150 is too low, there are many on the parts board that have been trying to collect all the parts for a factory cruise and have paid much higher for less. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

12-12-2008, 08:32 PM	#7
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,865	Re: WIW.. factory 68 cruise control I'll take it! __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

12-12-2008, 10:33 PM	#8
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: WIW.. factory 68 cruise control Chad, I traded it off a week ago.. sorry.. I forgot to delete the thread. Oops. I do know of another one thats nice and complete.. but spendy! he is asking $450 for it.. ouch..

12-17-2008, 06:50 PM	#9
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: WIW.. factory 68 cruise control Was this on your glove box build sheet? It was my understanding that cruse control was not offered till 70 or 71 as a replacement for speed warning.

12-17-2008, 11:03 PM	#10
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: WIW.. factory 68 cruise control Unfortunately the SPID was gone from the glove box.

12-21-2008, 06:47 PM	#11
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,791	Re: WIW.. factory 68 cruise control it was available from the factory in 68, i had a 68 burb with factory cruise and it was on the SPID. mine also had buddy buckets and shoulder belts too-all factory. up until now i have never seen another one. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

12-21-2008, 06:53 PM	#12
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: WIW.. factory 68 cruise control You learn something new every day.... I'll add this to my list of unique factory options. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-31-2008, 05:19 PM	#13
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: WIW.. factory 68 cruise control I have one, but not sure if I have everything. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.