WIW 67-68 hood?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

see ten · 01-02-2009, 10:54 PM

I'm not sure if this is the correct forum or not (If not mods please move it). What's a rust free 67-68 going for these days? I know complete clips seem to sell pretty well...didn't know if the hood would bring anything by itself.

Thanks guys!

**Green Machine** · 01-02-2009, 11:04 PM

I'd say $50 picked up. Hard and expensive to ship. Guess it depends where you are at. I have 3 hoods, 67-68, 69-70, and a 71-72. I have tried to sell them for $50 each, but no one wants to drive to my location.

msgross · 01-02-2009, 11:11 PM

I need a really nice one...

i've seen them from $50 to $140 in great shape...

nicolas72gmc · 01-02-2009, 11:38 PM

I paid $100 for mine (picked up) and it only had one small dent, no hood letters, primered, no lip trim. Hope this helps. Oh it is a 67-68 chev hood.

thirdstreettito · 01-03-2009, 01:25 AM

I've seen $25-$400. I'd sell a good one(if I had one) for $50.

*chevy29267truck* · 01-03-2009, 01:32 AM

i here there are hard too find good

67ChevyRedneck · 01-03-2009, 02:37 AM

When I went to Charlotte this past fall I was looking for a 67/68 hood. I found an excellent one with no surface dings and it didn't have the typical "bump" or "dip" in the center ridge. I bought it for $100. The two other hoods I saw were in OK shape, one was fairly priced at $75 and the other was too high (IMO) at $120. I think $50-$100 would be fair depending on shape. As others have mentioned I've seen a lot of cheap hoods on the board not sell (most of the time due to location).

This is the one I bought for $100, it doesn't look like much, but it's super straight and rust hole free. It's actually one of the best I've found. The front lip of these hoods are notorious for bubbling and rusting out. OR it seems that 90% of the hoods I look at have dent damage somewhere on the nose.

bw4sale · 01-03-2009, 04:30 AM

I've had a nice 69 hood for sale for a while for $75 with no luck. I would gladly trade it for a nice 67-68.

**special-K** · 01-03-2009, 11:29 AM

I see alot of 67/68 hoods split at the front lip...alot.I think good 67/68 hoods are a bit tougher to run across.Hoods have been taken for granted because they survive better than other sheetmetal.But,good hoods are as hard to find as good trucks now.You don`t take a good hood off a good truck unless it`s for a cowl induction.i`d say $100-$300.You pay more than that for a reproduction hood.A clean hood should be worth at least what a repro lists for,IMO.It`s a matter of having one nice enough in the time and place where someone who can appreciate it needs one.Or...yeah sure.

**HOTFUN** · 01-03-2009, 12:04 PM

Special K has this one nailed. Where do you find a good hood these days? Any 60 to 72 truck that has been sitting around has a case of hood center dip syndrome caused from the dry hinges after years of people prying open to look inside.

I bought a whole 67 C20 truck for $1200 because it had the most perfect hood and grille that I needed. I then found a NOS hood in the wrappers for $750 and a NOS grille for $400 which I bought also. So I would have to say a perfect that is a no rust, 67 only hood(no trim hole front edge) and damage free is worth $300 to $500. But it takes the right buyer, location, and timing.

72BlckButy · 01-03-2009, 03:04 PM

This is a good thread as I have a straight (surface rust only) '67 hood sitting in storage.

seeten you beat me to asking the same question.

01-02-2009, 10:54 PM	#1
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,073	WIW 67-68 hood?? I'm not sure if this is the correct forum or not (If not mods please move it). What's a rust free 67-68 going for these days? I know complete clips seem to sell pretty well...didn't know if the hood would bring anything by itself. Thanks guys!

01-02-2009, 11:04 PM	#2
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: WIW 67-68 hood?? I'd say $50 picked up. Hard and expensive to ship. Guess it depends where you are at. I have 3 hoods, 67-68, 69-70, and a 71-72. I have tried to sell them for $50 each, but no one wants to drive to my location. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

01-02-2009, 11:11 PM	#3
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WIW 67-68 hood?? I need a really nice one... i've seen them from $50 to $140 in great shape... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-02-2009, 11:38 PM	#4
nicolas72gmc Registered User Join Date: Aug 2008 Location: Sunny Arizona Posts: 525	Re: WIW 67-68 hood?? I paid $100 for mine (picked up) and it only had one small dent, no hood letters, primered, no lip trim. Hope this helps. Oh it is a 67-68 chev hood. __________________ Nick "Everyone has a plan, 'till they get punched in the mouth".........Mike Tyson 1968, GMC, SWB, Project 1972, GMC, LWB, Daily Driver, 383, headers, 2.5"/3" exhaust, 200r4, 3.5/5 ECE components. 1972, C/10, LWB, 350 vortec, th350

01-03-2009, 01:25 AM	#5
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: WIW 67-68 hood?? I've seen $25-$400. I'd sell a good one(if I had one) for $50. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

01-03-2009, 01:32 AM	#6
chevy29267truck Account Suspended Join Date: Sep 2008 Location: Alva Florida Posts: 668	Re: WIW 67-68 hood?? i here there are hard too find good

01-03-2009, 02:37 AM	#7
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: WIW 67-68 hood?? When I went to Charlotte this past fall I was looking for a 67/68 hood. I found an excellent one with no surface dings and it didn't have the typical "bump" or "dip" in the center ridge. I bought it for $100. The two other hoods I saw were in OK shape, one was fairly priced at $75 and the other was too high (IMO) at $120. I think $50-$100 would be fair depending on shape. As others have mentioned I've seen a lot of cheap hoods on the board not sell (most of the time due to location). This is the one I bought for $100, it doesn't look like much, but it's super straight and rust hole free. It's actually one of the best I've found. The front lip of these hoods are notorious for bubbling and rusting out. OR it seems that 90% of the hoods I look at have dent damage somewhere on the nose. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 01-03-2009 at 02:39 AM.

01-03-2009, 04:30 AM	#8
bw4sale Registered User Join Date: Sep 2006 Location: Hendersonville, TN Posts: 1,528	Re: WIW 67-68 hood?? I've had a nice 69 hood for sale for a while for $75 with no luck. I would gladly trade it for a nice 67-68. __________________ BRENT -'68 Stepside Project -'98 Z71 Daily Driver -Enough extra parts to build another truck and a half

01-03-2009, 11:29 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: WIW 67-68 hood?? I see alot of 67/68 hoods split at the front lip...alot.I think good 67/68 hoods are a bit tougher to run across.Hoods have been taken for granted because they survive better than other sheetmetal.But,good hoods are as hard to find as good trucks now.You don`t take a good hood off a good truck unless it`s for a cowl induction.i`d say $100-$300.You pay more than that for a reproduction hood.A clean hood should be worth at least what a repro lists for,IMO.It`s a matter of having one nice enough in the time and place where someone who can appreciate it needs one.Or...yeah sure. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-03-2009 at 11:44 AM.

01-03-2009, 12:04 PM	#10
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,144	Re: WIW 67-68 hood?? Special K has this one nailed. Where do you find a good hood these days? Any 60 to 72 truck that has been sitting around has a case of hood center dip syndrome caused from the dry hinges after years of people prying open to look inside. I bought a whole 67 C20 truck for $1200 because it had the most perfect hood and grille that I needed. I then found a NOS hood in the wrappers for $750 and a NOS grille for $400 which I bought also. So I would have to say a perfect that is a no rust, 67 only hood(no trim hole front edge) and damage free is worth $300 to $500. But it takes the right buyer, location, and timing. __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed" Last edited by HOTFUN; 01-03-2009 at 12:15 PM.

01-03-2009, 03:04 PM	#11
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: WIW 67-68 hood?? This is a good thread as I have a straight (surface rust only) '67 hood sitting in storage. seeten you beat me to asking the same question. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 01-03-2009 at 03:04 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.