Seat belts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DirtyLarry · 01-02-2009, 02:36 PM

Where can we buy new seat belts for our square trucks? All I see in the LMC catalog are lap belts and I looking for the shoulder belt assemblies for both the LH and RH side. And all I can find at the bone yards are Suburban and Blazer belts which are different. All the truck belts I could find are in poor shape.

Anybody have any leads?

Cyclone · 01-02-2009, 02:48 PM

Repop, bottom of page

pokethesmot · 01-02-2009, 02:51 PM

splurge for a 5 point racing harness

DirtyLarry · 01-02-2009, 02:58 PM

Quote:

Originally Posted by Cyclone

Repop, bottom of page

Those are the same belts that LMC sells. I am looking for shoulder belt asseblies not just lap belts.

Cyclone · 01-02-2009, 03:00 PM

Bottom of page... 3pt there, slow to load.

**old Rusty C10** · 01-02-2009, 06:22 PM

have you asked Capt Kaos who is a site vendor?

cochino12 · 01-02-2009, 06:57 PM

I bought some of these a few months back, not GM belts but fit and work great.

http://cgi.ebay.com/ebaymotors/ws/eB...m=120326699016

DirtyLarry · 01-02-2009, 11:42 PM

Thanks everybody.

I have a few more bone yards to walk through to see if I can find any decent OEM belts. I not real keen on the idea of the aftermarkets but may have to go that route. The belts in Cyclone's link are actually the same ones we use today in our production commercial chassis (Workhorse step vans) so I might be able to pick a set of up through our service parts group a bit cheaper. I think ours are only available in black though. I would like dark grey or dark blue.

PhilaTruck · 01-03-2009, 12:55 AM

Quote:

Originally Posted by Cyclone

Repop, bottom of page

Thanks for that link!

Pyrotechnic · 01-03-2009, 02:29 PM

Are any of these actually BOLT IN or direct replacement ? Looks like you might need to do a little adapting with some brackets at least.

Either way, does anyone have pics of these aftermarket belts installed ? Sure sounds like a better option than my frayed and sun faded belts but I'm not sold on them yet.

PhilaTruck · 01-03-2009, 03:54 PM

Quote:

Originally Posted by Pyrotechnic

Are any of these actually BOLT IN or direct replacement ? Looks like you might need to do a little adapting with some brackets at least.

Either way, does anyone have pics of these aftermarket belts installed ? Sure sounds like a better option than my frayed and sun faded belts but I'm not sold on them yet.

Pyro- I've sent them an email. I'll post their response-

-Todd

copperchevy · 01-03-2009, 05:34 PM

Dirtylarry, find a local upholstery shop that can change your webbing in your retractors and then paint your plastics with SEM paint. Thats what i did after not being able to find any factory black seatbelts at a decent price.

cochino12 · 01-03-2009, 06:54 PM

Quote:

Originally Posted by Pyrotechnic

Are any of these actually BOLT IN or direct replacement ? Looks like you might need to do a little adapting with some brackets at least.

Either way, does anyone have pics of these aftermarket belts installed ? Sure sounds like a better option than my frayed and sun faded belts but I'm not sold on them yet.

Not sure if you wanted to see the belts that I bought but here ya go

Pyrotechnic · 01-03-2009, 09:23 PM

Quote:

Originally Posted by cochino12

Not sure if you wanted to see the belts that I bought but here ya go

Thanks ! Those actually look really nice. My only worry is that female buckles that come with the kit look like they are the hard type for bucket seats and I still have a bench seat.

The lap belt kits have the correct female buckle on a short length of belt though. I supposed I could buy 3 point belt setup and then 3 of the lap belt kits @ $15 each and have a complete setup ?

What did you have to do mount the retractors ?

cochino12 · 01-03-2009, 09:54 PM

Quote:

Originally Posted by Pyrotechnic

Thanks ! Those actually look really nice. My only worry is that female buckles that come with the kit look like they are the hard type for bucket seats and I still have a bench seat.

The lap belt kits have the correct female buckle on a short length of belt though. I supposed I could buy 3 point belt setup and then 3 of the lap belt kits @ $15 each and have a complete setup ?

What did you have to do mount the retractors ?

I just took the cover off the female part of the belt and it worked great.

I bought the an achor kit from autoloc for like $15 (basicly just angle iron).

Pyrotechnic · 01-03-2009, 10:25 PM

Nice ! That makes more sense. I'm gonna have to seriously consider these as an option. Thanks for all the pics and info.

DirtyLarry · 01-03-2009, 11:04 PM

Yeah, those look better than I expected.

Thanks Adam

01-02-2009, 02:36 PM	#1
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Seat belts Where can we buy new seat belts for our square trucks? All I see in the LMC catalog are lap belts and I looking for the shoulder belt assemblies for both the LH and RH side. And all I can find at the bone yards are Suburban and Blazer belts which are different. All the truck belts I could find are in poor shape. Anybody have any leads? __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram

01-02-2009, 02:48 PM	#2
Cyclone Registered User Join Date: Oct 2004 Location: Sonoma, CA Posts: 318	Re: Seat belts Repop, bottom of page

01-02-2009, 02:51 PM	#3
pokethesmot profeshinaly unimployed Join Date: Dec 2008 Location: hazlehurst, GA Posts: 1,232	Re: Seat belts splurge for a 5 point racing harness __________________ my ride click here my myspace "having mud flaps is like asking for a smaller trophy"

01-02-2009, 03:00 PM	#5
Cyclone Registered User Join Date: Oct 2004 Location: Sonoma, CA Posts: 318	Re: Seat belts Bottom of page... 3pt there, slow to load.

01-02-2009, 06:22 PM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,288	Re: Seat belts have you asked Capt Kaos who is a site vendor? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-02-2009, 06:57 PM	#7
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Re: Seat belts I bought some of these a few months back, not GM belts but fit and work great. http://cgi.ebay.com/ebaymotors/ws/eB...m=120326699016 __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually Last edited by cochino12; 01-02-2009 at 06:58 PM.

01-02-2009, 11:42 PM	#8
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Re: Seat belts Thanks everybody. I have a few more bone yards to walk through to see if I can find any decent OEM belts. I not real keen on the idea of the aftermarkets but may have to go that route. The belts in Cyclone's link are actually the same ones we use today in our production commercial chassis (Workhorse step vans) so I might be able to pick a set of up through our service parts group a bit cheaper. I think ours are only available in black though. I would like dark grey or dark blue. __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram

01-03-2009, 02:29 PM	#10
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: Seat belts Are any of these actually BOLT IN or direct replacement ? Looks like you might need to do a little adapting with some brackets at least. Either way, does anyone have pics of these aftermarket belts installed ? Sure sounds like a better option than my frayed and sun faded belts but I'm not sold on them yet. __________________ 1977 GMC Sierra Grande

01-03-2009, 05:34 PM	#12
copperchevy Registered User Join Date: Sep 2007 Location: Tyler, Texas Posts: 220	Re: Seat belts Dirtylarry, find a local upholstery shop that can change your webbing in your retractors and then paint your plastics with SEM paint. Thats what i did after not being able to find any factory black seatbelts at a decent price. __________________ Mexican

01-03-2009, 10:25 PM	#16
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: Seat belts Nice ! That makes more sense. I'm gonna have to seriously consider these as an option. Thanks for all the pics and info. __________________ 1977 GMC Sierra Grande

01-03-2009, 11:04 PM	#17
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Re: Seat belts Yeah, those look better than I expected. Thanks Adam __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.