anyone know who makes this bed cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1LoC10 · 01-02-2009, 04:19 PM

http://cgi.ebay.com/ebaymotors/Cars-...1%7C240%3A1308

john02fxdl · 01-02-2009, 04:23 PM

Looks like it might be a Gaylord. Check out thier website www.gaylordslids.com. Not cheap, but very good quality from what I've been told. Hope this helps.

chevy_mike · 01-02-2009, 04:38 PM

Nice truck outside of the hack job on the radio install.

68shortstep · 01-02-2009, 04:44 PM

You might also try Sportsman Pickup Covers in Rogersville, Missouri. They make LOTSA designs of covers. Pretty sure I've seen this style done by them.

I've bought several covers from them over the years, including some custom-designed stuff.

red69ss · 01-02-2009, 06:32 PM

I was thinking the same thing mike didn't really care for the tail pipes either

big_al_71 · 01-02-2009, 07:21 PM

very nice truck...Makes me kind of want a bed cover...

LONGHAIR · 01-02-2009, 07:38 PM

The engine is not right either. The copy clearly states that it is a 400 Small block. The pictures definately show small block, but the SPID shows 400 which would have been a 402 (big block)

67CHIP72 · 01-02-2009, 08:03 PM

Quote:

Originally Posted by LONGHAIR

The engine is not right either. The copy clearly states that it is a 400 Small block. The pictures definately show small block, but the SPID shows 400 which would have been a 402 (big block)

SPID looks homemade anyway.

**leddzepp** · 01-02-2009, 08:10 PM

That is a Gaylords cover. I have the same one on my truck...http://67-72chevytrucks.com/vboard/c...ct=2743&cat=12

msgross · 01-02-2009, 08:11 PM

homemade SPID I think as well

nice truck, kinda odd that they ran all the AC parts over top of the engine and didn't swap the alternator over...

could have painted the speedo and fuel needles to match the aftermarket tach...

very nice ride though

chipflyer · 01-02-2009, 09:23 PM

That SPID looks terrible. Very nice truck though.

Jeff

**leddzepp** · 01-03-2009, 12:00 PM

Quote:

Originally Posted by chipflyer

That SPID looks terrible. Very nice truck though.

Jeff

He should have called you, Jeff!

elkynova · 01-03-2009, 02:32 PM

Nice rig. Looks like the gaylord cover. Besides the stereo, did anyone notice that the doors are 69-70 doors. 71 and 72 had molded panels and screws that helped hold the wind wing channel more rigid.

**leddzepp** · 01-03-2009, 02:34 PM

Quote:

Originally Posted by elkynova

Nice rig. Looks like the gaylord cover. Besides the stereo, did anyone notice that the doors are 69-70 doors. 71 and 72 had molded panels and screws that helped hold the wind wing channel more rigid.

Actually, it was only 72 that had the molded panels and wing window re-inforcement screw. His panels are correct. His seat covers are not correct and he used long water pump brackets/pullies for mounting his accessories. That is why the A/C comp and alternator are reversed.

**thelonerife** · 01-04-2009, 01:37 AM

i don't care for the bed cover. The spid has been placed over the orignal one. you can see part of the original on the left hand upper corner. Nice looking but not an original truck. I like the colors.

01-02-2009, 04:19 PM	#1
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	anyone know who makes this bed cover http://cgi.ebay.com/ebaymotors/Cars-...1%7C240%3A1308 __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

01-02-2009, 04:23 PM	#2
john02fxdl Registered User Join Date: Oct 2008 Location: Avondale, PA. South east corner of the state Posts: 75	Re: anyone know who makes this bed cover Looks like it might be a Gaylord. Check out thier website www.gaylordslids.com. Not cheap, but very good quality from what I've been told. Hope this helps.

01-02-2009, 04:38 PM	#3
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: anyone know who makes this bed cover Nice truck outside of the hack job on the radio install. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

01-02-2009, 04:44 PM	#4
68shortstep Looks good at 20-ft ..... Join Date: Apr 2005 Location: Mtn Home, AR Posts: 707	Re: anyone know who makes this bed cover You might also try Sportsman Pickup Covers in Rogersville, Missouri. They make LOTSA designs of covers. Pretty sure I've seen this style done by them. I've bought several covers from them over the years, including some custom-designed stuff.

01-02-2009, 06:32 PM	#5
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: anyone know who makes this bed cover I was thinking the same thing mike didn't really care for the tail pipes either __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

01-02-2009, 07:21 PM	#6
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: anyone know who makes this bed cover very nice truck...Makes me kind of want a bed cover... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

01-02-2009, 08:10 PM	#9
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: anyone know who makes this bed cover That is a Gaylords cover. I have the same one on my truck...http://67-72chevytrucks.com/vboard/c...ct=2743&cat=12

01-02-2009, 08:11 PM	#10
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: anyone know who makes this bed cover homemade SPID I think as well nice truck, kinda odd that they ran all the AC parts over top of the engine and didn't swap the alternator over... could have painted the speedo and fuel needles to match the aftermarket tach... very nice ride though __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 01-02-2009 at 08:11 PM.

01-02-2009, 09:23 PM	#11
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: anyone know who makes this bed cover That SPID looks terrible. Very nice truck though. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

01-03-2009, 02:32 PM	#13
elkynova Registered User Join Date: Dec 2008 Location: Richland, Wa. Posts: 15	Re: anyone know who makes this bed cover Nice rig. Looks like the gaylord cover. Besides the stereo, did anyone notice that the doors are 69-70 doors. 71 and 72 had molded panels and screws that helped hold the wind wing channel more rigid.

01-04-2009, 01:37 AM	#15
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: anyone know who makes this bed cover i don't care for the bed cover. The spid has been placed over the orignal one. you can see part of the original on the left hand upper corner. Nice looking but not an original truck. I like the colors. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.