Parts interchange ?'s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Skirkpat · 01-07-2009, 06:12 PM

1)I am stripping parts for my Suburban and was wondering if a 3/4 ton 4 wheel drive mastercylinder and brake booster would work on my 1/2 ton 2 wheel drive Suburban? both are 1969's

2)I have discs on the 4x4 truck, can I use the proportioning valve if I put discs on the Suburban?

3)Would the power steering boxes inerchange?

Thanks for any help I can Get....I really appreciate it...I would love to get this thing mobile before spring.

70GMCer · 01-07-2009, 06:29 PM

yes, yes & yes

primered_junk · 01-07-2009, 07:36 PM

look real close at the steering box, I don't know on the early stuff, but on the 73-87 gear boxes are different, the out put shaft where the pitman arm goes on is longer on the later 4x4 units. Like I said, I don't know if that is a fact on the pre 73 units. Just something to check.

Skirkpat · 01-07-2009, 09:32 PM

Quote:

Originally Posted by primered_junk

look real close at the steering box, I don't know on the early stuff, but on the 73-87 gear boxes are different, the out put shaft where the pitman arm goes on is longer on the later 4x4 units. Like I said, I don't know if that is a fact on the pre 73 units. Just something to check.

Thanks for the info, I also read in another post that the 4x4 steering boxes are different? I will have to look at them and see?

*project 67 sub* · 01-08-2009, 02:45 AM

got any more pics of that thier burb of yours

70GMCer · 01-08-2009, 09:27 AM

I was told just to change the arm & it will work......Maybe I was told wrong......

**special-K** · 01-08-2009, 10:21 AM

The difference is in the pitman arm.But,that changes the sector shaft as far as how the pitman arms mount.Parts are interchangable,it`s the same housing,and a rebuild kit is $15 at Napa if you`re so inclined.

Skirkpat · 01-08-2009, 11:22 AM

Thanks, I appreciate the help

Skirkpat · 01-08-2009, 11:28 AM

69_Suburban001.jpg:
Upload of file failed.

I guess my pictures are to big?

Skirkpat · 01-08-2009, 04:11 PM

Well I got some pics to load, sorry they are not to good...the last is the parts truck I was asking about.

*project 67 sub* · 01-08-2009, 08:22 PM

i used to have a set of those ansen sprint wheels on my 67 burb like that before it got switched over to a 5 lug

Quote:

Originally Posted by Skirkpat

Well I got some pics to load, sorry they are not to good...the last is the parts truck I was asking about.

Skirkpat · 01-08-2009, 10:30 PM

Quote:

Originally Posted by project 67 sub

i used to have a set of those ansen sprint wheels on my 67 burb like that before it got switched over to a 5 lug

I like them, but I am probably going to go the 5 lug route also. I like the old truck ralleyes.

*project 67 sub* · 01-09-2009, 01:40 AM

i had blacked out rally style wheels w/no trim rings or center caps on mine(kind of liked them to), untill i got some 20's for real cheap

Skirkpat · 01-09-2009, 10:51 AM

Project '67 , Are you in SoCal still ? We are there alot...My girlfiends aunt lives in Santa Monica, just outside of Venice. We spent Christmas with her anf I froze my @$$ off. It was warmer here by a few degrees, and that never happens in December!!!

By the way nice Suburban, It took me about ten years to find a reasonable project here, I had a '69 panel, but always wanted an extra door on it ?

01-07-2009, 06:12 PM	#1
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Parts interchange ?'s 1)I am stripping parts for my Suburban and was wondering if a 3/4 ton 4 wheel drive mastercylinder and brake booster would work on my 1/2 ton 2 wheel drive Suburban? both are 1969's 2)I have discs on the 4x4 truck, can I use the proportioning valve if I put discs on the Suburban? 3)Would the power steering boxes inerchange? Thanks for any help I can Get....I really appreciate it...I would love to get this thing mobile before spring.

01-07-2009, 06:29 PM	#2
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Parts interchange ?'s yes, yes & yes __________________ 1997 GMC Sierra Ext 1965 Mustang

01-07-2009, 07:36 PM	#3
primered_junk ASE master tech/machinist Join Date: May 2008 Location: Blue Mound Texas Posts: 303	Re: Parts interchange ?'s look real close at the steering box, I don't know on the early stuff, but on the 73-87 gear boxes are different, the out put shaft where the pitman arm goes on is longer on the later 4x4 units. Like I said, I don't know if that is a fact on the pre 73 units. Just something to check. __________________ "I sit here and I pray in my broken down Chevrolet....."

01-08-2009, 02:45 AM	#5
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Parts interchange ?'s got any more pics of that thier burb of yours

01-08-2009, 09:27 AM	#6
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Parts interchange ?'s I was told just to change the arm & it will work......Maybe I was told wrong...... __________________ 1997 GMC Sierra Ext 1965 Mustang

01-08-2009, 10:21 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: Parts interchange ?'s The difference is in the pitman arm.But,that changes the sector shaft as far as how the pitman arms mount.Parts are interchangable,it`s the same housing,and a rebuild kit is $15 at Napa if you`re so inclined. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-08-2009, 11:22 AM	#8
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: Parts interchange ?'s Thanks, I appreciate the help

01-08-2009, 11:28 AM	#9
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: Parts interchange ?'s 69_Suburban001.jpg: Upload of file failed. I guess my pictures are to big?

01-08-2009, 04:11 PM	#10
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: Parts interchange ?'s Well I got some pics to load, sorry they are not to good...the last is the parts truck I was asking about. Attached Images

01-09-2009, 01:40 AM	#13
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Parts interchange ?'s i had blacked out rally style wheels w/no trim rings or center caps on mine(kind of liked them to), untill i got some 20's for real cheap

01-09-2009, 10:51 AM	#14
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: Parts interchange ?'s Project '67 , Are you in SoCal still ? We are there alot...My girlfiends aunt lives in Santa Monica, just outside of Venice. We spent Christmas with her anf I froze my @$$ off. It was warmer here by a few degrees, and that never happens in December!!! By the way nice Suburban, It took me about ten years to find a reasonable project here, I had a '69 panel, but always wanted an extra door on it ? Last edited by Skirkpat; 01-09-2009 at 10:54 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.