Long box stepside bed (Seattle) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Livrat · 01-07-2009, 12:48 AM

Still on a 69 3/4 ton.. not rusty!!
Does have heavy damage on drivers fender.. minor damage on passenger fender, all of the wood floor is still intact.. front panel is nice.. tailgate is toast.. all of the spare tire rack is present.. with exception of the factory lock..
$150.00 ... the only catch is you must remove. (I will help) or take the entire rolling chassis if wanted.. (cab and rear axle carrier not included)

Castiron9 · 01-07-2009, 10:41 AM

Does it come with that nice "slick" tire........LOL............

Livrat · 01-07-2009, 12:13 PM

Rene..
Yes it does!! It can come with all of the 19.5"s and a complete rolling chassis if you like... (I will even toss in a few bent fenders, core support, a step rear bumper and other various metal pieces)
As soon as I remove the built 250 6 cyl and the rust free cab I will even deliver it to your house!! (unless you need a cab too??)

I just thought I would offer it here before it all goes to the scrapper later this week ..

**CPNE** · 01-07-2009, 12:28 PM

Quote:

Originally Posted by Livrat

Rene..
Yes it does!! It can come with all of the 19.5"s and a complete rolling chassis if you like... (I will even toss in a few bent fenders, core support, a step rear bumper and other various metal pieces)
As soon as I remove the built 250 6 cyl and the rust free cab I will even deliver it to your house!! (unless you need a cab too??)

I just thought I would offer it here before it all goes to the scrapper later this week ..

You're killing me Mark, how about east coast delivery?

dave666693 · 01-07-2009, 12:48 PM

what about the "built" motor?

Livrat · 01-07-2009, 01:12 PM

Jeff. Sure I'll deliver it!! As long as you pay for: GAS.. FOOD.. and Lodging ....I could stop off in North Dakota on the way back and drag home another 34 Studebaker... hmmmmmmmmmm... ( If I can borrow my buddies 01 Diesel the fuel mileage would be over 20MPG.. if not my 68 gets 9MPG..) could get kinda of expensive and kill the deal?? LOL

Dave... At this time I plan to put the built 6 in my Honeys 72 Cheyenne shorty fleetside

**CPNE** · 01-07-2009, 01:39 PM

Can I get it by tomorrow?

Hate to see something I could use get scrapped but thems the breaks. Longsteps get no love

ETsC10 · 01-07-2009, 02:48 PM

TTT for ya MARK!

Gents, I got to look this truck over yesterday and it would be a crying sin to scrap it...VERY rust free.
Mention of building a trailer came up. Maybe someone here needs a really unique trailer?

stllookn · 01-07-2009, 03:50 PM

Mark, If you deliver...I will take and buy you lunch! My wife is going to kill me...LOL! Those are some funky wheels!!!! I need a BOS since you are keeping the cab and paperwork...right?

Livrat · 01-07-2009, 07:15 PM

Quote:

Originally Posted by stllookn

Mark, If you deliver...I will take and buy you lunch! My wife is going to kill me...LOL! Those are some funky wheels!!!! I need a BOS since you are keeping the cab and paperwork...right?

SOLD!! Thanks Mike... Your wife won"t even notice it out back... Will she???

stllookn · 01-07-2009, 10:04 PM

Wife killed that one...oh well...she is right...no time for another project! Bump for you Mark. I will still come by to look at the door panels however...I can buy parts to finish a project...just no more new projects...LOL!

Bump for you!

Livrat · 01-07-2009, 10:28 PM

LOL...Mike... Can't you tell her its for the unfinished trailer project you have been contemplating?????... hint hint....
No worries.... I will give it a couple more days to see what happens then off to the recycler it goes.. I would make a trailer out of it myself.. But.. no need.. no time... nor room, as I have a 72 CST Blazer showing up for parts..

Castiron9 · 01-08-2009, 12:27 AM

Just a crazy idea..........How hard would it be to make into a legal trailer.It just seems a waste to have it go to the scraper???

Livrat · 01-08-2009, 12:37 AM

The mechanical part is fairly easy.. not sure on the DMV part as I have never done one... anyone in Washington State know what's needed?

dave666693 · 01-08-2009, 10:12 AM

You have to have it inspected by the State Patrol after it is built. Then you can get a title. Be sure to keep all receipts for anything you buy to build it. Check the DOL website for more info.

dave666693 · 01-08-2009, 05:32 PM

Mark if you scrap the bed I would be interested in the right fender and tire rack. As long as the fender is decent and not all bondoed. (is bondoed a word?)
I am assuming the long bed fender is the same as a short bed???

Livrat · 01-08-2009, 10:29 PM

Dave..
There is no bondo or rust on the passenger fender but it is not what I would call decent and was not planning to remove it. it has several damaged spots on the side wheel well lip.. you should be able to see them in the picture.. I will remove the spare tire rack and hang onto for for you..
If you really are interested in the fender.. let me know ASAP as I intend to head to the scrapper in the morning

daves71k5 · 01-09-2009, 01:30 AM

What would you take for the taillight and backup light assembly? My Brother needs these pieces for his bed but not sure if he can swing any extra cash right now, please let me know. Dave

dave666693 · 01-09-2009, 10:32 AM

sounds like the fender isn't worth the trouble. Thanks for checking.

Livrat · 01-09-2009, 10:38 PM

Quote:

Originally Posted by daves71k5

What would you take for the taillight and backup light assembly? My Brother needs these pieces for his bed but not sure if he can swing any extra cash right now, please let me know. Dave

PM.. sent..

wyojack · 01-09-2009, 11:52 PM

Did the bed go to the scrapper? If not do you want to sell drivers side step? Thanks Jack

Livrat · 01-10-2009, 12:33 AM

Quote:

Originally Posted by wyojack

Did the bed go to the scrapper? If not do you want to sell drivers side step? Thanks Jack

Jack... Sorry.. hauled it off this morning and did not remove the steps...

1971ChevyTruck · 01-10-2009, 01:42 AM

You don't happen to have the rear bumper brackets do you??

Livrat · 01-10-2009, 01:46 AM

Sorry no brackets, It had an ugly step bumper that was bent..

1971ChevyTruck · 01-10-2009, 01:48 AM

Ok..had to try...Thanks for the quick reply

01-07-2009, 12:48 AM	#1
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Long box stepside bed (Seattle) Still on a 69 3/4 ton.. not rusty!! Does have heavy damage on drivers fender.. minor damage on passenger fender, all of the wood floor is still intact.. front panel is nice.. tailgate is toast.. all of the spare tire rack is present.. with exception of the factory lock.. $150.00 ... the only catch is you must remove. (I will help) or take the entire rolling chassis if wanted.. (cab and rear axle carrier not included) Attached Images

01-07-2009, 10:41 AM	#2
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Re: Long box stepside bed (Seattle) Does it come with that nice "slick" tire........LOL............ __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

01-07-2009, 12:13 PM	#3
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Long box stepside bed (Seattle) Rene.. Yes it does!! It can come with all of the 19.5"s and a complete rolling chassis if you like... (I will even toss in a few bent fenders, core support, a step rear bumper and other various metal pieces) As soon as I remove the built 250 6 cyl and the rust free cab I will even deliver it to your house!! (unless you need a cab too??) I just thought I would offer it here before it all goes to the scrapper later this week ..

01-07-2009, 12:48 PM	#5
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Long box stepside bed (Seattle) what about the "built" motor? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

01-07-2009, 01:12 PM	#6
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Long box stepside bed (Seattle) Jeff. Sure I'll deliver it!! As long as you pay for: GAS.. FOOD.. and Lodging ....I could stop off in North Dakota on the way back and drag home another 34 Studebaker... hmmmmmmmmmm... ( If I can borrow my buddies 01 Diesel the fuel mileage would be over 20MPG.. if not my 68 gets 9MPG..) could get kinda of expensive and kill the deal?? LOL Dave... At this time I plan to put the built 6 in my Honeys 72 Cheyenne shorty fleetside

01-07-2009, 01:39 PM	#7
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: Long box stepside bed (Seattle) Can I get it by tomorrow? Hate to see something I could use get scrapped but thems the breaks. Longsteps get no love __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

01-07-2009, 02:48 PM	#8
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: Long box stepside bed (Seattle) TTT for ya MARK! Gents, I got to look this truck over yesterday and it would be a crying sin to scrap it...VERY rust free. Mention of building a trailer came up. Maybe someone here needs a really unique trailer? __________________ . Forum Guidelines and Rules Buying and Selling Code of Conduct Become a Board Supporter! Truck FAQ Ellen... the boards artsy-fartsy, eclectic, truck-lovin' gal-member...

01-07-2009, 03:50 PM	#9
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Long box stepside bed (Seattle) Mark, If you deliver...I will take and buy you lunch! My wife is going to kill me...LOL! Those are some funky wheels!!!! I need a BOS since you are keeping the cab and paperwork...right? __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 01-07-2009 at 03:53 PM.

01-07-2009, 10:04 PM	#11
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Long box stepside bed (Seattle) Wife killed that one...oh well...she is right...no time for another project! Bump for you Mark. I will still come by to look at the door panels however...I can buy parts to finish a project...just no more new projects...LOL! Bump for you! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

01-07-2009, 10:28 PM	#12
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Long box stepside bed (Seattle) LOL...Mike... Can't you tell her its for the unfinished trailer project you have been contemplating?????... hint hint.... No worries.... I will give it a couple more days to see what happens then off to the recycler it goes.. I would make a trailer out of it myself.. But.. no need.. no time... nor room, as I have a 72 CST Blazer showing up for parts.. Last edited by Livrat; 01-07-2009 at 10:29 PM.

01-08-2009, 12:27 AM	#13
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Re: Long box stepside bed (Seattle) Just a crazy idea..........How hard would it be to make into a legal trailer.It just seems a waste to have it go to the scraper??? __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

01-08-2009, 12:37 AM	#14
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Long box stepside bed (Seattle) The mechanical part is fairly easy.. not sure on the DMV part as I have never done one... anyone in Washington State know what's needed?

01-08-2009, 10:12 AM	#15
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Long box stepside bed (Seattle) You have to have it inspected by the State Patrol after it is built. Then you can get a title. Be sure to keep all receipts for anything you buy to build it. Check the DOL website for more info. __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

01-08-2009, 05:32 PM	#16
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Long box stepside bed (Seattle) Mark if you scrap the bed I would be interested in the right fender and tire rack. As long as the fender is decent and not all bondoed. (is bondoed a word?) I am assuming the long bed fender is the same as a short bed??? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

01-08-2009, 10:29 PM	#17
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Long box stepside bed (Seattle) Dave.. There is no bondo or rust on the passenger fender but it is not what I would call decent and was not planning to remove it. it has several damaged spots on the side wheel well lip.. you should be able to see them in the picture.. I will remove the spare tire rack and hang onto for for you.. If you really are interested in the fender.. let me know ASAP as I intend to head to the scrapper in the morning



Register or Log In To remove these advertisements.

01-09-2009, 01:30 AM	#18
daves71k5 Registered User Join Date: Jan 2002 Location: American Falls, Idaho-USA Posts: 318	Re: Long box stepside bed (Seattle) What would you take for the taillight and backup light assembly? My Brother needs these pieces for his bed but not sure if he can swing any extra cash right now, please let me know. Dave

01-09-2009, 10:32 AM	#19
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Long box stepside bed (Seattle) sounds like the fender isn't worth the trouble. Thanks for checking. __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

01-09-2009, 11:52 PM	#21
wyojack Registered User Join Date: Oct 2008 Location: Riverton Wyoming Posts: 7	Re: Long box stepside bed (Seattle) Did the bed go to the scrapper? If not do you want to sell drivers side step? Thanks Jack

01-10-2009, 01:42 AM	#23
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Long box stepside bed (Seattle) You don't happen to have the rear bumper brackets do you??

01-10-2009, 01:46 AM	#24
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Long box stepside bed (Seattle) Sorry no brackets, It had an ugly step bumper that was bent..

01-10-2009, 01:48 AM	#25
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Long box stepside bed (Seattle) Ok..had to try...Thanks for the quick reply

Register or Log In To remove these advertisements.