|
|
|
01-10-2009, 01:50 PM
|
#1 | |
|
Senior Member
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,377
|
Re: Backspacing
Quote:
__________________
A husband can be right...or...A husband can be happy.  67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.  1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc   JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 01-10-2009 at 01:50 PM. |
|
|
|
|
01-10-2009, 06:44 PM
|
#2 |
|
Moderator
 
Join Date: Jul 2006
Location: Ozark, MO
Posts: 4,919
|
Re: Backspacing
I'm running 3" DJM lower control arms, stock spindles which would explain why I don't have any issues. It's been so long since I lowered it and put those wheels on...clearance might have been the reason I went with the LCA's instead of spindles.
If I remember correctly, there is some light trimming to do on the drop spindles with 15x8 on 4.5" backspacing. I wouldn't want to start grinding on brand new spindles. But my setup works fine, Hawker I sent you a PM with the wheel pics.
__________________
'86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
