3/4 ton lift spindles? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**leddzepp** · 01-10-2009, 04:17 PM

Does anyone know if there are Lift spindles available for 3/4 ton 2wd (C-20) trucks? I have found drop spindles, but it is going to be $$ to lower the truck, which requires a lot more work and parts. So, I figured if I lift the front end of the truck, it will be even with the rear end, and I can keep the 33" tires on it, and go with a lifted truck as opposed to a lowered one. No need to change the 8 lugs or any of that mess. I checked Fabtech, and it looks like they do not make them....any one know of a manufacturer?? Thanks.

pooz911 · 01-11-2009, 01:44 PM

Noboby makes a lifted spindle for our year truck.

I have seen threads where someone used the 88 + 1/2 ton lifted spindle and ball joints.

I don't know if you can use a 1992 and up 3/4 lifted spindle w/ ball joints and mate them w/ our a arms.

What width rim are you using w/ your 33 inch tires? Do you have a big block or small block?

thirdstreettito · 01-11-2009, 04:34 PM

Grunion at Grunion fabrication could probably set you up with a sweet 2wd lift kit. He does awesome work!

ap2002 · 01-11-2009, 05:41 PM

not trying to steal your thread, but i know you are talking about a c20, does some one know if they make a lift spindle for a c10?

pooz911 · 01-11-2009, 07:10 PM

http://67-72chevytrucks.com/vboard/s...=304940&page=2

try this link....2nd page

01-10-2009, 04:17 PM	#1
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	3/4 ton lift spindles? Does anyone know if there are Lift spindles available for 3/4 ton 2wd (C-20) trucks? I have found drop spindles, but it is going to be $$ to lower the truck, which requires a lot more work and parts. So, I figured if I lift the front end of the truck, it will be even with the rear end, and I can keep the 33" tires on it, and go with a lifted truck as opposed to a lowered one. No need to change the 8 lugs or any of that mess. I checked Fabtech, and it looks like they do not make them....any one know of a manufacturer?? Thanks.

01-11-2009, 01:44 PM	#2
pooz911 Registered User Join Date: Jun 2003 Location: Simi Valley Posts: 145	Re: 3/4 ton lift spindles? Noboby makes a lifted spindle for our year truck. I have seen threads where someone used the 88 + 1/2 ton lifted spindle and ball joints. I don't know if you can use a 1992 and up 3/4 lifted spindle w/ ball joints and mate them w/ our a arms. What width rim are you using w/ your 33 inch tires? Do you have a big block or small block? __________________ www.cardomain.com/id/pooz911

01-11-2009, 04:34 PM	#3
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: 3/4 ton lift spindles? Grunion at Grunion fabrication could probably set you up with a sweet 2wd lift kit. He does awesome work! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

01-11-2009, 05:41 PM	#4
ap2002 Registered User Join Date: Apr 2008 Location: Houston, TX Posts: 247	Re: 3/4 ton lift spindles? not trying to steal your thread, but i know you are talking about a c20, does some one know if they make a lift spindle for a c10? __________________ 1971 C-10 SWB - LS swap w/4L60e, 20x8.5front 20x12rear, 1968 C-10 SWB - 454 BB TH350 -Gone!

01-11-2009, 07:10 PM	#5
pooz911 Registered User Join Date: Jun 2003 Location: Simi Valley Posts: 145	Re: 3/4 ton lift spindles? http://67-72chevytrucks.com/vboard/s...=304940&page=2 try this link....2nd page __________________ www.cardomain.com/id/pooz911



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.