1970 3/4 ton first build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kopfjaegger · 01-11-2009, 10:11 PM

Hi all, I had originally posted on a different category asking for help with ID'ing my axles, and any other advice. Here are pics of my project. It is my first 4x4 so any advice would be appreciated.

It is a 1970 with what turns out to be a Dana 44, 4 spd, and a little massaging. I posted pics so that any of you more experienced guys out there can see what I have, what I'm doing, and perhaps comment on it so I can go in the right direction. This is my first 4x4 so any help is appreciated.

My original post has a lot more info so I won't type it here. Hope to hear some great tips.

Thanks

J

thirdstreettito · 01-11-2009, 11:10 PM

No pics posted.

Richard8971 · 01-11-2009, 11:13 PM

Quote:

Originally Posted by thirdstreettito

No pics posted.

You can't see them Brad? Kinda like the emperor's new clothes. Only the wise and rich can see them....

Just kidding, yeah so far no pics can be seen!

Don

kopfjaegger · 01-11-2009, 11:47 PM

Ok, you're all probably going to want to beat me severely about the head for this one, or at least keep me from working with power tools. I uploaded my pics, they are in my gallery and albums, but for the life of me, I can't figure out how in the world to post them on the thread. Anyone care to hook a brother up?

I guess I'm not too computer savvy.

Apologies

J

kopfjaegger · 01-11-2009, 11:58 PM

I think I figured it out, here goes;

This was the beginning of the job;

This is some of the rot on the cab;

Pretty messy in there

This is when I was gettin ready to lift the bed;

Test fitting the panels off of the 68 Donor truck

01-11-2009, 10:11 PM	#1
kopfjaegger Registered User Join Date: Jan 2009 Location: Las Cruces, New Mexico Posts: 86	1970 3/4 ton first build Hi all, I had originally posted on a different category asking for help with ID'ing my axles, and any other advice. Here are pics of my project. It is my first 4x4 so any advice would be appreciated. It is a 1970 with what turns out to be a Dana 44, 4 spd, and a little massaging. I posted pics so that any of you more experienced guys out there can see what I have, what I'm doing, and perhaps comment on it so I can go in the right direction. This is my first 4x4 so any help is appreciated. My original post has a lot more info so I won't type it here. Hope to hear some great tips. Thanks J

01-11-2009, 11:10 PM	#2
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: 1970 3/4 ton first build No pics posted. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

01-11-2009, 11:47 PM	#4
kopfjaegger Registered User Join Date: Jan 2009 Location: Las Cruces, New Mexico Posts: 86	Re: 1970 3/4 ton first build Ok, you're all probably going to want to beat me severely about the head for this one, or at least keep me from working with power tools. I uploaded my pics, they are in my gallery and albums, but for the life of me, I can't figure out how in the world to post them on the thread. Anyone care to hook a brother up? I guess I'm not too computer savvy. Apologies J

01-11-2009, 11:58 PM	#5
kopfjaegger Registered User Join Date: Jan 2009 Location: Las Cruces, New Mexico Posts: 86	Re: 1970 3/4 ton first build I think I figured it out, here goes; This was the beginning of the job; This is some of the rot on the cab; Pretty messy in there This is when I was gettin ready to lift the bed; Test fitting the panels off of the 68 Donor truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.