Drop spindle ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69C10@16 · 01-11-2009, 02:43 PM

Ok guys, I'm sick of it!! Sick of looking at that beautiful bare frame sitting in my driveway and nothing happening to it!!! The time has come. This thing is getting started right now.

Now, the point:

Anybody used Classic Performance Product's 2.5 Drop spindles? ANy issues? Good quality? FOr 239$ they r the cheapest I have found on the net so far. ANy opinions, notes, 2cents would be great guys. Thanks. I might note they are for a 69 C-10 I know they have a few different drop spindles listed.

Oh, p.s. I have some stuff off the truck I will probably be giving away i.e. drum brake setup and what not like that. the gas tank, stuff I'm replacing with updated equipment. Would I need to join to list the stuff as free?? Not a big deal if I do this site is AMAZING and it's worth my Mr. Jackson to join I just don't want to break any rules.

STOCKISH · 01-11-2009, 03:08 PM

I would join regardless. It's nice to support a forum that is going to be supporting your truck habbit. You'll find yourself researching stuff alot I'm sure.

On the spindles. I guess everyone will have there opinions. I used CPP parts on my 69 when I swapped to discs and lowered it. I honestly had ZERO problems with anything. Everything seemed nice and worked great. This time, I used Early Classic Enterprises and there stuff is top notch.

Great parts and great service make for a less stressfull build. Good luck.

**leddzepp** · 01-11-2009, 04:04 PM

I bought my drop spindles from CPP for my 72. Zero problems here. They are manufactured by Western suspension (USA made)

OARNGESI · 01-11-2009, 06:16 PM

I got mine from cpp theyre fine

texanidiot25 · 01-11-2009, 06:19 PM

CPP has sketchy customer service people say, but it wasn't too bad for me. Would have liked a shipping confirmation from them when my rotors were ordered, but oh well.

When I was comparing rotors, I e-mailed brothers as to why their product was worth more money, they only cited that the CPP rotors weren't made in the USA, but said nothing about the quality being better.

OARNGESI · 01-11-2009, 06:53 PM

Quote:

Originally Posted by texanidiot25

cpp has sketchy customer service people say, but it wasn't too bad for me. Would have liked a shipping confirmation from them when my rotors were ordered, but oh well.

When i was comparing rotors, i e-mailed brothers as to why their product was worth more money, they only cited that the cpp rotors weren't made in the usa, but said nothing about the quality being better.

i heard alot of bad things about cpp the only problem i had is i ordered a front end rebuild kit i got the stuff minus the ball joints it was noted and they showed a couple days later but everything was shipped to me within like a week

thirdstreettito · 01-11-2009, 08:04 PM

Not trying to bash CPP, but Mike is the cheapest I have found out of about 20 sites.

http://estore.websitepros.com/126980...LES/Detail.bok

1968SWBBigBlock · 01-11-2009, 08:10 PM

Early classic gets my vote $249 made in the usa

**lolife99** · 01-11-2009, 08:12 PM

Hey 69C10@16,... welcome from another Missouri member.
I think CPP has great products,... and POOR customer service. That's what I got from them. Look at the review board for threads about CPP. I would suggest ECE, (Early Classic Enterprises) Call and talk to Stan.
Good Luck.

69C10@16 · 01-12-2009, 12:57 AM

ok the early classic enterprises is the website i was looking for that I could NOT remember the name to this morning. lol. Have ordered from them before and had an error but they were extremely fast and friendly in correcting their mistake. These are most likely going to be the ones I purchase. Thanks! And this time I'll bookmark the ECE Website.

LuckyHenriksen · 01-12-2009, 01:06 AM

Quote:

Originally Posted by leddzepp

I bought my drop spindles from CPP for my 72. Zero problems here. They are manufactured by Western suspension (USA made)

X2, I used the same spindle, sourced for Performance Online (POL). If you haven't already, you might want to check with them, I think they are cheaper than CPP.

LuckyHenriksen · 01-12-2009, 01:07 AM

Oh and join the board! Its awesome.

01-11-2009, 02:43 PM	#1
69C10@16 Registered User Join Date: Aug 2007 Location: Greenfield, MO Posts: 215	Drop spindle ? Ok guys, I'm sick of it!! Sick of looking at that beautiful bare frame sitting in my driveway and nothing happening to it!!! The time has come. This thing is getting started right now. Now, the point: Anybody used Classic Performance Product's 2.5 Drop spindles? ANy issues? Good quality? FOr 239$ they r the cheapest I have found on the net so far. ANy opinions, notes, 2cents would be great guys. Thanks. I might note they are for a 69 C-10 I know they have a few different drop spindles listed. Oh, p.s. I have some stuff off the truck I will probably be giving away i.e. drum brake setup and what not like that. the gas tank, stuff I'm replacing with updated equipment. Would I need to join to list the stuff as free?? Not a big deal if I do this site is AMAZING and it's worth my Mr. Jackson to join I just don't want to break any rules. Last edited by 69C10@16; 01-11-2009 at 02:46 PM.

01-11-2009, 03:08 PM	#2
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Drop spindle ? I would join regardless. It's nice to support a forum that is going to be supporting your truck habbit. You'll find yourself researching stuff alot I'm sure. On the spindles. I guess everyone will have there opinions. I used CPP parts on my 69 when I swapped to discs and lowered it. I honestly had ZERO problems with anything. Everything seemed nice and worked great. This time, I used Early Classic Enterprises and there stuff is top notch. Great parts and great service make for a less stressfull build. Good luck. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-11-2009, 04:04 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: Drop spindle ? I bought my drop spindles from CPP for my 72. Zero problems here. They are manufactured by Western suspension (USA made)

01-11-2009, 06:16 PM	#4
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Drop spindle ? I got mine from cpp theyre fine __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

01-11-2009, 06:19 PM	#5
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Drop spindle ? CPP has sketchy customer service people say, but it wasn't too bad for me. Would have liked a shipping confirmation from them when my rotors were ordered, but oh well. When I was comparing rotors, I e-mailed brothers as to why their product was worth more money, they only cited that the CPP rotors weren't made in the USA, but said nothing about the quality being better.

01-11-2009, 08:04 PM	#7
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Drop spindle ? Not trying to bash CPP, but Mike is the cheapest I have found out of about 20 sites. http://estore.websitepros.com/126980...LES/Detail.bok __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

01-11-2009, 08:10 PM	#8
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Drop spindle ? Early classic gets my vote $249 made in the usa __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

01-11-2009, 08:12 PM	#9
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: Drop spindle ? Hey 69C10@16,... welcome from another Missouri member. I think CPP has great products,... and POOR customer service. That's what I got from them. Look at the review board for threads about CPP. I would suggest ECE, (Early Classic Enterprises) Call and talk to Stan. Good Luck. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-12-2009, 12:57 AM	#10
69C10@16 Registered User Join Date: Aug 2007 Location: Greenfield, MO Posts: 215	Re: Drop spindle ? ok the early classic enterprises is the website i was looking for that I could NOT remember the name to this morning. lol. Have ordered from them before and had an error but they were extremely fast and friendly in correcting their mistake. These are most likely going to be the ones I purchase. Thanks! And this time I'll bookmark the ECE Website.

01-12-2009, 01:07 AM	#12
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Drop spindle ? Oh and join the board! Its awesome. __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.