What did you get done? 01/11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 01-11-2009, 10:39 PM

I had a weekend off, but I spent most of it inside doing office work. I did get some errands ran yesterday, truck inspected and a movie with the family.

Today I washed all our drivers since it rained enough this week to get them all nasty. Took the family to dinner, and called it a day.

What did you get done?

73CheyenneSuper20 · 01-11-2009, 10:55 PM

Nothing. Except sometime soon I get to do a trans.

Ds86C10 · 01-11-2009, 11:00 PM

Nothin but signed for some big heavy boxes from Summit Racing.... one weighted about 40lbs and the other weighted about 70-80lbs.... all truck parts

westie 666 · 01-11-2009, 11:02 PM

Finally got my front end sorted, turned out my front springs were shot so picked up a new set, did a service and now I'm on the road in time for for the Kumeu show, the biggest in the southern hemisphere.

**lolife99** · 01-11-2009, 11:08 PM

I had a little time Friday to clean up my newly acquired '69 swb.
Saturday I got the front bags and suspension put back together on the blazer. Today. Nothing much.
Here's my '69,...

sqrbdy · 01-11-2009, 11:16 PM

I finished strippng the blazer minus the body, wrapped a few more pieces of my interior and acquired a set of 3rd row seats out of an 08 tahoe for the blazer. This interior is going to be nice. I'll be ready to pull the motor this weekend so if your are reading this Nate, I will be ready very soon. Saturday, I went to the movies with my 4 yr old daughter and the little boy next door. We watched "Bolt" and it wasn't terrible. It actually made me laugh out loud several times. Oh yeah, and I spent several hours on the internet trying to figure out what motor I will putting in the blazer. I've got a very nice polished TPI setup for it, but I am having second thoughts. decisions, decisions.

softballnrd27 · 01-11-2009, 11:25 PM

I sold the 350 out of the truck to make way for the 383.

asphaltburner · 01-12-2009, 12:08 AM

Yo! Made a 300 mile roundtrip and picked up my new "luxury alloy" wheels for FRANKENTRUCK:

Name: 011109 002 (Custom).jpg
Views: 182
Size: 87.8 KB

Name: 011109 001 (Custom).jpg
Views: 185
Size: 83.4 KB

I LIKE"EM!!
Todd.

flamingbig10 · 01-12-2009, 12:30 AM

the wheels look good Todd, Today I finished the head and taillight wiring, and started wiring the gauges

rfmaster · 01-12-2009, 12:35 AM

Still down with a cold - and it was close to 80 here today (Santa Ana winds warmed things up)!
While coughing and sneezing replaced headlight switch, installed old steering wheel (for now) and re-located SES (LED) to the left side of the instrument cluster. To do all of this took one trip to Autozone to return defective switch and pick-up replacement at Kragen! Non Delco replacement parts can be crap shoot and this time it was no different.
Need to find replacement E-clip (original broke) to make sure that steering wheel nut does not back out!

//RF

68c10owner · 01-12-2009, 03:41 AM

I wanted to install my 3/5 drop and my hitch but the wife wanted to go shopping anf then a old friend came into town. maybe next weekend.

wicked_sky_gazer · 01-12-2009, 09:44 AM

I feel i had a very productive weekend i started the daunting task of cleaning out my shop so i have room to get a better start on the truck... oh and if you look very closely you can actually see my chassis and new crate motor burried amongst the rubble.... enjoi!!

And after 16 hours a 12 pack and a dumpster worth of trash hauled off this is what i have now....

used to not be able to walk in the door i took the last picture from

tgh117 · 01-12-2009, 09:49 AM

Replaced the steering box, all the ball joints, repacked the bearings, replaced the rear brakes, all new emergency brake cables and orders some braided brake hoses.

All in all, pretty productive saturday. Sunday got out the fourwheelers and played in the snow a bit.

willis0107 · 01-12-2009, 10:03 AM

Mine started on Friday.

Another board member and myself went to BFE to pick up a new used engine for the blazer got it home and after he left I started the task of removing the old and putting in the new.

Saturday I had the engine in gettin g ready to bolt up the Torque converter to find out the fly wheel was differnt so pulled the engine again and put on the new fly wheel I got it all bolted up saturday

Sunday put the starter on finished the wiring. primed the fuel filters (diesel) put in the batteries and started it up.

In all the engines that I have ever installed this one by far was the easiest. Heck it even starts and runs like a champ with now adjustments at all

Last night I tool the Blazer on a 20 mile drive to make sure everything was good on it. Today I need to put the grill on and go fill t up

82c10 · 01-12-2009, 04:50 PM

i took a little road trip to up by woodward, oklahoma & traded for a 87 K5 blazer, in pretty decent shape, will post pics later, i finally have another chevy,lol

skidder111 · 01-12-2009, 05:14 PM

I finally hauled my 72 K5 to the body shop for finish and paint (Ron's Rod Shop in Stavely AB). Will pick it up in a couple weeks.

grinch4om · 01-12-2009, 05:15 PM

got the red lights and siren in the beast

01-11-2009, 10:39 PM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	What did you get done? 01/11 I had a weekend off, but I spent most of it inside doing office work. I did get some errands ran yesterday, truck inspected and a movie with the family. Today I washed all our drivers since it rained enough this week to get them all nasty. Took the family to dinner, and called it a day. What did you get done? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 01-11-2009 at 10:39 PM.

01-11-2009, 10:55 PM	#2
73CheyenneSuper20 Registered User Join Date: Nov 2008 Location: San Bernardino, CA Posts: 92	Re: What did you get done? 01/11 Nothing. Except sometime soon I get to do a trans. __________________ '71 C25 Camper Special, 402, TH400, Longbed, Power Loc axle, Figuring out the rest of the details.... '10 Dodge Charger SXT - DD '91 Kasel M101A2 3/4 ton trailer (It has Chevy rims!)

01-11-2009, 11:00 PM	#3
Ds86C10 2WD 4 Life Join Date: Oct 2008 Location: Coon Rapids, MN Posts: 169	Re: What did you get done? 01/11 Nothin but signed for some big heavy boxes from Summit Racing.... one weighted about 40lbs and the other weighted about 70-80lbs.... all truck parts __________________ Big D 1969 c10 1960 cadillac 1978 king cobra

01-11-2009, 11:02 PM	#4
westie 666 Registered User Join Date: Mar 2008 Location: AUCKLAND NZ Posts: 264	Re: What did you get done? 01/11 Finally got my front end sorted, turned out my front springs were shot so picked up a new set, did a service and now I'm on the road in time for for the Kumeu show, the biggest in the southern hemisphere. __________________ 77 Cheyenne no longer in bits

01-11-2009, 11:08 PM	#5
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,703	Re: What did you get done? 01/11 I had a little time Friday to clean up my newly acquired '69 swb. Saturday I got the front bags and suspension put back together on the blazer. Today. Nothing much. Here's my '69,... Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 01-11-2009 at 11:10 PM.

01-11-2009, 11:16 PM	#6
sqrbdy Registered User Join Date: Mar 2008 Location: Spring, Texas Posts: 207	Re: What did you get done? 01/11 I finished strippng the blazer minus the body, wrapped a few more pieces of my interior and acquired a set of 3rd row seats out of an 08 tahoe for the blazer. This interior is going to be nice. I'll be ready to pull the motor this weekend so if your are reading this Nate, I will be ready very soon. Saturday, I went to the movies with my 4 yr old daughter and the little boy next door. We watched "Bolt" and it wasn't terrible. It actually made me laugh out loud several times. Oh yeah, and I spent several hours on the internet trying to figure out what motor I will putting in the blazer. I've got a very nice polished TPI setup for it, but I am having second thoughts. decisions, decisions. __________________ Ain't Nobody Like a Square Body sqrbdy myspace

01-11-2009, 11:25 PM	#7
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: What did you get done? 01/11 I sold the 350 out of the truck to make way for the 383. __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

01-12-2009, 12:08 AM	#8
asphaltburner Registered User Join Date: Jul 2008 Location: Ault, Colorado Posts: 862	Re: What did you get done? 01/11 Yo! Made a 300 mile roundtrip and picked up my new "luxury alloy" wheels for FRANKENTRUCK: I LIKE"EM!! Todd. __________________ '78 3/4 ton 4x4 custom "Todd-built" FRANKENTRUCK!

01-12-2009, 12:30 AM	#9
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: What did you get done? 01/11 the wheels look good Todd, Today I finished the head and taillight wiring, and started wiring the gauges __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

01-12-2009, 12:35 AM	#10
rfmaster Registered User Join Date: Oct 2003 Location: OC CA Posts: 1,374	Re: What did you get done? 01/11 Still down with a cold - and it was close to 80 here today (Santa Ana winds warmed things up)! While coughing and sneezing replaced headlight switch, installed old steering wheel (for now) and re-located SES (LED) to the left side of the instrument cluster. To do all of this took one trip to Autozone to return defective switch and pick-up replacement at Kragen! Non Delco replacement parts can be crap shoot and this time it was no different. Need to find replacement E-clip (original broke) to make sure that steering wheel nut does not back out! //RF __________________ "The Beast" 1975 Chevrolet C20 longbed 350/700R4! with 3inch body lift Dual Flowmasters Super 40's! TBI retrofit completed (2007-07-29) New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17)

01-12-2009, 03:41 AM	#11
68c10owner Registered User Join Date: Oct 2003 Location: Carmichael, California Posts: 3,006	Re: What did you get done? 01/11 I wanted to install my 3/5 drop and my hitch but the wife wanted to go shopping anf then a old friend came into town. maybe next weekend. __________________ Anthony

01-12-2009, 09:44 AM	#12
wicked_sky_gazer Living Legend Join Date: Oct 2007 Location: owasso oklahoma Posts: 160	Re: What did you get done? 01/11 I feel i had a very productive weekend i started the daunting task of cleaning out my shop so i have room to get a better start on the truck... oh and if you look very closely you can actually see my chassis and new crate motor burried amongst the rubble.... enjoi!! And after 16 hours a 12 pack and a dumpster worth of trash hauled off this is what i have now.... used to not be able to walk in the door i took the last picture from __________________ '81 c10 sw 355cid roller motor 350turbo with stage two shift kit, poor rear end gearing, not sure peg speed... speedo is mia.. project is temporarily on pause again... Thankyou wonderfull economy.. check it out Im not to worried i have an uncaning ability to save myself from some weeeiiirrd crap East Ok meet East Ok date Tony

01-12-2009, 09:49 AM	#13
tgh117 Crazy Join Date: Apr 2005 Location: Emmaus, Pa Posts: 203	Re: What did you get done? 01/11 Replaced the steering box, all the ball joints, repacked the bearings, replaced the rear brakes, all new emergency brake cables and orders some braided brake hoses. All in all, pretty productive saturday. Sunday got out the fourwheelers and played in the snow a bit. __________________ 77 SB Stepside in a bunch of pieces scattered around the garage.

01-12-2009, 10:03 AM	#14
willis0107 67lwb Join Date: Sep 2007 Location: Centralia Mo Posts: 180	Re: What did you get done? 01/11 Mine started on Friday. Another board member and myself went to BFE to pick up a new used engine for the blazer got it home and after he left I started the task of removing the old and putting in the new. Saturday I had the engine in gettin g ready to bolt up the Torque converter to find out the fly wheel was differnt so pulled the engine again and put on the new fly wheel I got it all bolted up saturday Sunday put the starter on finished the wiring. primed the fuel filters (diesel) put in the batteries and started it up. In all the engines that I have ever installed this one by far was the easiest. Heck it even starts and runs like a champ with now adjustments at all Last night I tool the Blazer on a 20 mile drive to make sure everything was good on it. Today I need to put the grill on and go fill t up

01-12-2009, 04:50 PM	#15
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	Re: What did you get done? 01/11 i took a little road trip to up by woodward, oklahoma & traded for a 87 K5 blazer, in pretty decent shape, will post pics later, i finally have another chevy,lol __________________ *SWB Stands for Short Wide Bed*



Register or Log In To remove these advertisements.

01-12-2009, 05:14 PM	#16
skidder111 Registered User Join Date: Jan 2008 Location: Pincher Creek, Alberta, Canada Posts: 141	Re: What did you get done? 01/11 I finally hauled my 72 K5 to the body shop for finish and paint (Ron's Rod Shop in Stavely AB). Will pick it up in a couple weeks.

01-12-2009, 05:15 PM	#17
grinch4om dang its hot Join Date: Nov 2006 Location: frankfort kentucky Posts: 1,349	Re: What did you get done? 01/11 got the red lights and siren in the beast

Register or Log In To remove these advertisements.