|
01-12-2009, 11:19 PM
|
#1 |
|
"the other guy"
Join Date: Oct 2008
Location: Olivehurst California 95961
Posts: 901
|
67 w/power steering?
my frame has power steering right, it even has the dimple in the frame. i dont understand it, its a 67 swb all numbers on the frame match the vin? and the numbers on the frame look absoloutly factory. any thoughts
__________________
God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE" 
|
|
|
|
01-13-2009, 12:20 PM
|
#2 |
|
"the other guy"
Join Date: Oct 2008
Location: Olivehurst California 95961
Posts: 901
|
Re: 67 w/power steering?
anyone?
__________________
God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"
|
|
|
|
|
01-13-2009, 12:37 PM
|
#3 |
|
Registered User
Join Date: Feb 2008
Location: Albuquerque
Posts: 359
|
Re: 67 w/power steering?
My 67 was manual and I converted it...and it had a dimpled frame and it was a small back window, very original truck.
Manufactures and frames and years, after all the truck was build on an assembly line in the 60's...Between the assembly line and quanity of parts on hand, it's hard to tell who IS running a company... Mick |
|
|
|
|
01-13-2009, 01:32 PM
|
#4 |
|
"the other guy"
Join Date: Oct 2008
Location: Olivehurst California 95961
Posts: 901
|
Re: 67 w/power steering?
i was always under the impression (from info found on this board) that the 67-70 frames were void of the dimple?
__________________
God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"
|
|
|
|
|
01-13-2009, 02:42 PM
|
#5 |
|
Hittin E-Z Street on Mud Tires
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: 67 w/power steering?
No, only 67 frames were "void" of the dimple, but there are some lucky people out there who have 67's that were built late in the run that had the dimple.
Your VIN should start something like: CS147S... Is the 5th digit a 7? 7 is for 67, 8 for 68, etc...
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride  American Born, Country by the Grace of God  1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
|
|
|
|
01-13-2009, 04:33 PM
|
#6 |
|
"the other guy"
Join Date: Oct 2008
Location: Olivehurst California 95961
Posts: 901
|
Re: 67 w/power steering?
mine reads cs148zxxxxxx. under year model on my pink it says 1967. must be late 67 early 68.
__________________
God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"
|
|
|
|
|
01-13-2009, 05:05 PM
|
#7 |
|
Registered User
Join Date: May 2003
Location: Ontario
Posts: 279
|
Re: 67 w/power steering?
Mine is a 67 and I have the power steering and dimpled frame as well
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
