WTB two 15x10 factory wheels in DFW... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

noahdallas · 01-14-2009, 12:07 AM

Hi everyone, I am looking for two 15x10 factory/ralley wheels please. I am not sure what they go for used but want some near Dallas/Ft Worth please. I have a '72 rear end so I need them to be 5x5. I already have two front wheels. I am wanting to put a big back tire on it like the picture below. I got this pic from another board member here hope he doesn't mind. Might be interested in some weld wheels but would have to be local too. Any help would be appreciated.

finch · 01-14-2009, 12:19 AM

you might have better luck just going with some aftermarket ralleys. they come in various shapes and sizes

PT'S 70 CST · 01-14-2009, 01:06 AM

They did not make a 10" factory truck ralley wheel but as finch said there are several places that carry after market ralley wheels in a 10".

PT

Gray Ghost · 01-14-2009, 09:54 AM

You sure you don't want vintage wagon wheels? I got a whole set on my stepper...15x10 rear and 15x8 front CHEAP!

David Johnson · 01-14-2009, 09:59 AM

Those are aftermarket corvette rallys. I have a set with tires and caps but I'd have to sell all 4. I think they are 7's and 10's, but I'd have to check. $750 for the set + shipping if someone else is interested.

noahdallas · 01-14-2009, 02:07 PM

Thanks everyone for their input.. I did look some 15x10 up on some website and they were $100 each. I didn't know that they were not a factory size. I apperciate the wagon wheel offer but not really my preference. I would love to get some corvette style ones but those are out of my budget. thanks again for everyones help and knowledge... it does come in handy and I will keep an eye out for something around DFW ... My truck is on stands right now and I am ready to start working on it again...

my67chevytruck · 01-14-2009, 06:58 PM

pm sent

Gray Ghost · 01-14-2009, 08:46 PM

I was kinda halfway kiddin'...I doubt I could even give these things away, but hey, I had to toss it in there in case someone else might be lookin' for them.

primered_junk · 01-14-2009, 11:00 PM

Quote:

Originally Posted by Gray Ghost

I was kinda halfway kiddin'...I doubt I could even give these things away, but hey, I had to toss it in there in case someone else might be lookin' for them.

If they are 5 lug, you can drop them off at my house.

noahdallas · 01-14-2009, 11:45 PM

Quote:

Originally Posted by Gray Ghost

I was kinda halfway kiddin'...I doubt I could even give these things away, but hey, I had to toss it in there in case someone else might be lookin' for them.

Hey Gray Ghost, I knew you were... I am just trying to spend some time with my truck before I try to sell it again... I think I am obsessed with my 2 door tahoe and I am spending my spare cash on that for now. I love these old trucks but havn't really had time to mess with mine in at least 6 months. Thanks for offer...

01-14-2009, 12:07 AM	#1
noahdallas Registered User Join Date: Jul 2005 Location: Dallas, TX Posts: 324	WTB two 15x10 factory wheels in DFW... Hi everyone, I am looking for two 15x10 factory/ralley wheels please. I am not sure what they go for used but want some near Dallas/Ft Worth please. I have a '72 rear end so I need them to be 5x5. I already have two front wheels. I am wanting to put a big back tire on it like the picture below. I got this pic from another board member here hope he doesn't mind. Might be interested in some weld wheels but would have to be local too. Any help would be appreciated. Attached Images

01-14-2009, 12:19 AM	#2
finch Registered User Join Date: Dec 2007 Location: Sioux Falls, SD Posts: 365	Re: WTB two 15x10 factory wheels in DFW... you might have better luck just going with some aftermarket ralleys. they come in various shapes and sizes __________________ Andy... '70 C/10 Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=298553 '71 K/20 Frame-off resto, SOLD!!! http://67-72chevytrucks.com/vboard/c...ct=2399&cat=12 '05 Silverado Z-71, CC SB, Daily Driver

01-14-2009, 01:06 AM	#3
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: WTB two 15x10 factory wheels in DFW... They did not make a 10" factory truck ralley wheel but as finch said there are several places that carry after market ralley wheels in a 10". PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

01-14-2009, 09:54 AM	#4
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: WTB two 15x10 factory wheels in DFW... You sure you don't want vintage wagon wheels? I got a whole set on my stepper...15x10 rear and 15x8 front CHEAP! __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

01-14-2009, 09:59 AM	#5
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: WTB two 15x10 factory wheels in DFW... Those are aftermarket corvette rallys. I have a set with tires and caps but I'd have to sell all 4. I think they are 7's and 10's, but I'd have to check. $750 for the set + shipping if someone else is interested.

01-14-2009, 02:07 PM	#6
noahdallas Registered User Join Date: Jul 2005 Location: Dallas, TX Posts: 324	Re: WTB two 15x10 factory wheels in DFW... Thanks everyone for their input.. I did look some 15x10 up on some website and they were $100 each. I didn't know that they were not a factory size. I apperciate the wagon wheel offer but not really my preference. I would love to get some corvette style ones but those are out of my budget. thanks again for everyones help and knowledge... it does come in handy and I will keep an eye out for something around DFW ... My truck is on stands right now and I am ready to start working on it again...

01-14-2009, 06:58 PM	#7
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: WTB two 15x10 factory wheels in DFW... pm sent __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

01-14-2009, 08:46 PM	#8
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: WTB two 15x10 factory wheels in DFW... I was kinda halfway kiddin'...I doubt I could even give these things away, but hey, I had to toss it in there in case someone else might be lookin' for them. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.