complete kick panel replacement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billt · 01-15-2009, 01:33 PM

i want to replace the complete driver side kick panel from the floor to the top where it curves over to thre right. i have a doner piece from another cab. i'm wondering if their is any thing i should be worried about when i remove the damaged (RUSTED) ORIGINAL. i will be replacing the very lower kick panel with a new 7" piece you can order.any help would be appreciated, thanks, billt

72 SHORTBED 7.0 · 01-15-2009, 01:37 PM

I was about to do a search about some thing like what your about to do I will check and see what you get back from every one good luck

72 SHORTBED 7.0 · 01-15-2009, 01:38 PM

Add some pic some times that helps

theyammieguy · 01-15-2009, 02:15 PM

Subscribed.

I need to do the same thing.

**LEEVON** · 01-15-2009, 08:46 PM

Hi Bill,

Good talking with you, and

to the board.

*Cunit69* · 01-15-2009, 09:38 PM

Doe yours look this bad?

theyammieguy · 01-15-2009, 09:44 PM

Mine is rusted out at the bottom all the way across. I can lift the door and watch the kick panel move. It's also rusted above the vent.

01-15-2009, 01:33 PM	#1
billt Registered User Join Date: Dec 2008 Location: Rogers, Ar. Posts: 5	complete kick panel replacement i want to replace the complete driver side kick panel from the floor to the top where it curves over to thre right. i have a doner piece from another cab. i'm wondering if their is any thing i should be worried about when i remove the damaged (RUSTED) ORIGINAL. i will be replacing the very lower kick panel with a new 7" piece you can order.any help would be appreciated, thanks, billt

01-15-2009, 01:37 PM	#2
72 SHORTBED 7.0 Registered User Join Date: Nov 2007 Location: dallas Tx in front of you Posts: 182	Re: complete kick panel replacement I was about to do a search about some thing like what your about to do I will check and see what you get back from every one good luck

01-15-2009, 01:38 PM	#3
72 SHORTBED 7.0 Registered User Join Date: Nov 2007 Location: dallas Tx in front of you Posts: 182	Re: complete kick panel replacement Add some pic some times that helps

01-15-2009, 02:15 PM	#4
theyammieguy accepting donations Join Date: Oct 2008 Location: houston tx Posts: 521	Re: complete kick panel replacement Subscribed. I need to do the same thing. __________________ 1999 Yamaha roadstar 1600 chop. (in progress.) See my builds here>http://s113.photobucket.com/albums/n238/nickrp_2006/ "Ya'll can go to hell, I'm going to Texas." David Crockett

01-15-2009, 08:46 PM	#5
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: complete kick panel replacement Hi Bill, Good talking with you, and to the board. __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

01-15-2009, 09:38 PM	#6
Cunit69 Account Suspended Join Date: Nov 2008 Location: Burnet Texas Posts: 121	Re: complete kick panel replacement Doe yours look this bad? Attached Images

01-15-2009, 09:44 PM	#7
theyammieguy accepting donations Join Date: Oct 2008 Location: houston tx Posts: 521	Re: complete kick panel replacement Mine is rusted out at the bottom all the way across. I can lift the door and watch the kick panel move. It's also rusted above the vent. __________________ 1999 Yamaha roadstar 1600 chop. (in progress.) See my builds here>http://s113.photobucket.com/albums/n238/nickrp_2006/ "Ya'll can go to hell, I'm going to Texas." David Crockett



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.