67 small rear window

[otsenre]

does have some scractches, maybe a decent driver 15.00 plus shipping,also there has not been much interest in anyone buying entire cab so before I have it crushed, does anyone need any metal pieces or ?

[nightmare]

how does the outside part of the firewall look? i'm needing the drivers side top corner, behind the gutter. i'll take some pics tonight to show what I need. also, the filler neck of the gas tank, if that is going too.

[lks dcvn]

How much to deliver the window to DieselEater in Trinidad, CO? - also curious to know about the price/condition of the rear metal in the cab floor (above the rear cab mounts and below the gas tank).

[otsenre]

Originally Posted by nightmare

how does the outside part of the firewall look? i'm needing the drivers side top corner, behind the gutter. i'll take some pics tonight to show what I need. also, the filler neck of the gas tank, if that is going too.

Outside of firewall looks good, send a pic of how much you need

[otsenre]

Originally Posted by lks dcvn

How much to deliver the window to DieselEater in Trinidad, CO? - also curious to know about the price/condition of the rear metal in the cab floor (above the rear cab mounts and below the gas tank).

Tell Adrian to stop and pick it up on one of his trips to Denver. I cut one of those under tank panels for a member once and I swore I would never do again but who know with a good cut torch , I was having problems with mine, That metal looks good

[lks dcvn]

I will let Adrian know - hopefully he could pick up the metal corner pieces as well and throw them in the 67 SWB for me.

How much do you want for those cab floor pieces (left and right cab rear floor where it rots out) and the rear glass?

[otsenre]

Originally Posted by lks dcvn

I will let Adrian know - hopefully he could pick up the metal corner pieces as well and throw them in the 67 SWB for me.

How much do you want for those cab floor pieces (left and right cab rear floor where it rots out) and the rear glass?

Go to paint and circle areas you want! How about fifty buck for everything if Adrian can pick up

[lks dcvn]

How is the passenger side of the cab (floor area) - I might need this piece as well...if Adrian can pick it up.

[lks dcvn]

Taken from another post - but the area is the same...near the cab mount to where the floor meets the corner - about 4" wide or so.

http://67-72chevytrucks.com/vboard/s...68&postcount=4

Thanks ebfabman

[otsenre]

Originally Posted by lks dcvn

Taken from another post - but the area is the same...near the cab mount to where the floor meets the corner - about 4" wide or so.

http://67-72chevytrucks.com/vboard/s...68&postcount=4

Thanks ebfabman

Passenger side has rust at corner, left side looks OK from inside

[zythen]

How much for the spot light if it works?

[otsenre]

Originally Posted by zythen

How much for the spot light if it works?

Spotlite has been sold

[tgriffin27]

Have you tried selling the cab on ebay?My fav trucks are 67's and i would hate to see a cab in that good of shape be cut into pieces or crushed. If i lived closer i would pick it up and put it on my truck.

[nightmare]

Ok, here is the part that I need.

[Retro68]

I inquired about the front end. Didn't realize you had the rest of the truck. How much for everything you have? The cab looks to good to cut up I agree!

[lks dcvn]

"Go to paint and circle areas you want! How about fifty buck for everything if Adrian can pick up"

Works for me - if you find a buyer for the whole thing - then go that route as it will be easier for you - but if you want it gone sooner than later - I will take the parts mentioned:

Rear Glass
Driver Side Rear Cab metal (under tank) - the one that is rust free
Passenger Side Floor/Rocker area pictured above

I don't plan on picking up the 67 SWB over at Adrian's until springtime so it will be a few months - he mentioned that he could pick them up if the 67 I bought from him is still there. I don't know the next time he will be through your area - but storing a few pieces like that would be a lot easier than a whole cab -

Let me know. Thanks.

[otsenre]

Originally Posted by Retro68

I inquired about the front end. Didn't realize you had the rest of the truck. How much for everything you have? The cab looks to good to cut up I agree!

Lets do the math here, front clip-200, rust free straight doors-175.00, cab,75.00, some pieces off the cab already gone, like the steering wheel, spotlite,seat belts,all are pending payment

[otsenre]

Originally Posted by lks dcvn

"Go to paint and circle areas you want! How about fifty buck for everything if Adrian can pick up"

Works for me - if you find a buyer for the whole thing - then go that route as it will be easier for you - but if you want it gone sooner than later - I will take the parts mentioned:

Rear Glass
Driver Side Rear Cab metal (under tank) - the one that is rust free
Passenger Side Floor/Rocker area pictured above

I don't plan on picking up the 67 SWB over at Adrian's until springtime so it will be a few months - he mentioned that he could pick them up if the 67 I bought from him is still there. I don't know the next time he will be through your area - but storing a few pieces like that would be a lot easier than a whole cab -

Let me know. Thanks.

I would prefer to sell complete, I also hate to have it crushed, but its in my way and I need it gone. I will give it a little more time. What do you mean by if the 67 you bought from him is still there, isnt it a done deal?

[lks dcvn]

yup the 67 SWB is a done deal - I just haven't arranged transport for it to Ohio yet - he mentioned that it could stay out there as long as it was paid for - I paid for it a few weeks ago...

Another member in Ohio mentioned that he would be heading out there in the coming months and might bring it back with him. I need some snow to melt here before I can bring it this way anyway.

Adrian (nor I for that matter) doesn't know when the truck will be heading to Ohio - but it will be a bit before I arrange it.

His (Adrian's) comment was that if the truck hasn't shipped to Ohio - and he was heading your way - that he could pick up the rear glass and the cab patch parts on his way through and toss them in the 67 SWB to come to Ohio with the truck .

Since it will be at least a month before I will arrange the transport of the 67 from CO to OH - it should be a safe bet for the truck to be there. If Adrian can pick up the parts at a time that works for the both of you - how much would you like?

Let me know - you can shoot me a PM or post here - either is fine.