Welcome bagged81 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Izzy · 02-28-2003, 02:45 PM

Quote:

Originally posted by LOHRTBT
I like the location of the tanks and such...I guess If I lose my factory Fuel tanks I can do the same huh?

Yep. My 4' 12 gallon tank nearly fits there perfect. I'm gonna replace it w/ a 5 gallon and put another after the axle on the frame.

LOHRTBT · 02-28-2003, 03:12 PM

COOL.. I guess I need to figure out what my gas tank situation will be then before the bags.....Hmmm....Fuel Cell under the bed where the burban tank mounts up maybe.

PHOENIX · 02-28-2003, 03:16 PM

I say you cut some steel between the ash tray and the glove box, then weld another ash tray to the original, extend the pivoting parts and have 4-way controls and 2 (dual pressure) gauges in the ash tray. Thats what Ill do if I ever have money for bags.

79BIG10 · 02-28-2003, 04:29 PM

Welcome aboard

Looks great!!

**swervin ervin** · 02-28-2003, 05:06 PM

Welcome to the forum bagged. Sweeeet ride. Love the color.

bagged81 · 02-28-2003, 06:50 PM

Quote:

Originally posted by LOHRTBT
COOL.. I guess I need to figure out what my gas tank situation will be then before the bags.....Hmmm....Fuel Cell under the bed where the burban tank mounts up maybe.

Thats what I should have done. Next time I will build one to fit between the framerails just behind the axle. Where would you put your filler neck?

Low87 · 02-28-2003, 06:57 PM

That's what I'll be working on in the next month, plenty of pics to come. I'm looking through street rod catalogs for a gas door suitable for the bed floor. I'll let you know if I find anything.

LOHRTBT · 02-28-2003, 07:07 PM

Im going to have either a door like Greg stated or just have it flush mounted to the bed floor with a flat area around it.

Trick76 · 02-28-2003, 07:55 PM

Welcome bagged81!! Nice Ride, I hope you get your airbag probs fixed so you can drive the thing more

Derek

bagged78 · 02-28-2003, 08:21 PM

Hey that's a great name!!! Like your truck to....

brad2 · 02-28-2003, 09:37 PM

COOL truck......welcome. My setup is very similar but I have a four way system. A digital gauge might fit in the ashtray if you put the switches somewhere elso. Late model trucks have a nice little overhead console that looks perfect for putting some gauges in also.

84Stepper · 03-01-2003, 03:27 PM

Welcome to the board! Sweet ride, I could of sworn I saw that for sale on ebay a while back. Very nice truck tho!!

gchemist · 03-02-2003, 12:33 AM

Way nice color. Nice job on the bags!!
Welcome to the board.

bagged81 · 03-03-2003, 12:18 PM

Quote:

Originally posted by 84Stepper
I could of sworn I saw that for sale on ebay a while back.

You be right. I did not get what I wanted so I guess it stays in the carport. Thats alright, I really did not want to sell it anyways.

84Stepper · 03-04-2003, 12:07 AM

Good choice man!! I was eyeballing that truck for a while......only if I had the money then!!

bagged81 · 03-04-2003, 12:37 AM

Quote:

Originally posted by 84Stepper
Good choice man!!

Ah, I was the one that put it on ebay. I have been building it since '97.

84Stepper · 03-05-2003, 09:05 PM

I know I was saying good choice by keeping it.

02-28-2003, 03:12 PM	#27
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	COOL.. I guess I need to figure out what my gas tank situation will be then before the bags.....Hmmm....Fuel Cell under the bed where the burban tank mounts up maybe. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

02-28-2003, 03:16 PM	#28
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	I say you cut some steel between the ash tray and the glove box, then weld another ash tray to the original, extend the pivoting parts and have 4-way controls and 2 (dual pressure) gauges in the ash tray. Thats what Ill do if I ever have money for bags. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

02-28-2003, 04:29 PM	#29
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Welcome aboard Looks great!! __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

02-28-2003, 05:06 PM	#30
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Welcome to the forum bagged. Sweeeet ride. Love the color. __________________ Mike 1985 Chevy C-10

02-28-2003, 06:57 PM	#32
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	That's what I'll be working on in the next month, plenty of pics to come. I'm looking through street rod catalogs for a gas door suitable for the bed floor. I'll let you know if I find anything. __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

02-28-2003, 07:07 PM	#33
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Im going to have either a door like Greg stated or just have it flush mounted to the bed floor with a flat area around it. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

02-28-2003, 07:55 PM	#34
Trick76 Living la vida broka Join Date: Jan 2003 Location: P'ville California Posts: 221	Welcome bagged81!! Nice Ride, I hope you get your airbag probs fixed so you can drive the thing more Derek __________________ 1976 C10 Longbed lowered 5/7, hot 355/TH350. ~ SOLD 1974 C10 Shortbed Stepside 350/Saginaw ~ SOLD 1984 C10 Longbed 6.2l diesel 700r4. ~SOLD 1985 GMC C20 350 700r4, ~under the knife

02-28-2003, 08:21 PM	#35
bagged78 world class smart ass! Join Date: Jan 2003 Location: Clinton Utah Posts: 335	Hey that's a great name!!! Like your truck to.... __________________ Aric 75 2WD BLAZER (never ending project) -some day maybe- 02 2500HD CREW CAB 4X (daily drive) -8" lift 37s and 22s- ____ ____________________________

02-28-2003, 09:37 PM	#36
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	COOL truck......welcome. My setup is very similar but I have a four way system. A digital gauge might fit in the ashtray if you put the switches somewhere elso. Late model trucks have a nice little overhead console that looks perfect for putting some gauges in also.

03-01-2003, 03:27 PM	#37
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Welcome to the board! Sweet ride, I could of sworn I saw that for sale on ebay a while back. Very nice truck tho!! __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

03-02-2003, 12:33 AM	#38
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Way nice color. Nice job on the bags!! Welcome to the board. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

03-04-2003, 12:07 AM	#40
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Good choice man!! I was eyeballing that truck for a while......only if I had the money then!! __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

03-05-2003, 09:05 PM	#42
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	I know I was saying good choice by keeping it. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.