WTB Exhaust hanger !!!!!!!!!!!!

[sameyrasmea72]

I need one last stock exhaust hanger. I don't have a pic, but it is the rear hanger on the passenger side. It hangs from the arrow point in the pic. It would have to be from a coil rearend and would be from a factory dual exhaust truck, so I guess a BB. Usually trucks with newer exhaust use different hangers so there is a good chance that the hanger is still on a lot of trucks just hanging there. If the strap is missing or cut off that is fine because I am having those made up. I will try to get a pic of the piece I need. Thanks Jason

[sameyrasmea72]

I have not found a pic of the hanger yet, but I did find a better pic of where it goes. It goes through this piece of rubber and goes down and wraps around the pipe.

[71 super]

I recently went through exhaust catalog at napa looking for stock type pipe for the 4x4 and the walker/maremont book still lists the hanger as available. If you can get someone to let look at the catalog you should be able to find what you are looking for. If you can't get a part number I will get one from the store locally for you. Hope this helps. Harold

[DANTIP]

Jason,

I can send a photo of the correct hanger. My truck and parts are at the lake garage and it may be a few weeks before I can send the photos.

Nice Detail!!!

[1956cameo]

Wish I could help you, I bought a BB parts truck that had the hanger you are looking for, but I sold it to a board member in CA. Now I only have the Drivers side hanger. Good luck.

[sameyrasmea72]

Originally Posted by 71 super

I recently went through exhaust catalog at napa looking for stock type pipe for the 4x4 and the walker/maremont book still lists the hanger as available. If you can get someone to let look at the catalog you should be able to find what you are looking for. If you can't get a part number I will get one from the store locally for you. Hope this helps. Harold

I don't think these hangers are available any more, but I could be wrong. If i was guessing the napa one are replacements, maybe the u-bolt type.I will see if I can get a part # and maybe the next time you go to napa you can check. I would Appreciate it.

Here are some pics. The one on the left is missing the strap, but that would be ok as I can make those.

[sameyrasmea72]

Dantip, Thanks for the offer and coment.

56cameo, Would you want to sell the driverside one?

[1956cameo]

Sure! I assume you are just talking about the metal strap that goes from the rubber grommet on that exhaust frame arm to the exhaust pipe? If so I can send it $10 shipped and if you want the exhaust frame arm with it $30 shipped. Just let me know if you are interested.

[sameyrasmea72]

ttt