Lokar Auto Shifter & switch to trade - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70GMCer · 01-27-2009, 04:01 PM

Here's a Lokar shifter linkage part #ACA-1800 & a Lokar backup/neutral safety switch part #BL-1400U. These parts where on my 70 and are setup for a sbc with 350 turbo trans setting in the V8 place on the frame. I only have around 200 miles on the shifter linkage & have never wired up the switch. The switch was just mounted on the transmission pan. All parts look like new except where nuts have made contact with washers & shifter arm.

Keep in mine that the switch can only be used for either backup lights, or neutral safety switch. You can't do both at the same time.

I have a copy of the installation instructions for the shifter linkage, but not the switch. Easy though. All you do is 2 bolts to the pan & the switch lever makes contact with the shifter lever at the trans.

I'm looking for a trade first before I sell these. I'm looking for a Holley 600 cfm, list #1850, "Base Plate" with "Vacuum Secondary, or equivalent, (no Double Pumper plate) & 2 bare, dual line float bowls, (center float). Plate must be in nice shape & without excessive shaft play or modifications.

Please respond to thread....

70GMCer · 01-28-2009, 07:44 AM

ttt

olblue60@aol.com · 01-28-2009, 09:49 AM

I would be interested in the switch if you decide to sell. Thanks!

John

70GMCer · 01-28-2009, 10:00 AM

If I do sell, will only sell as a set.

Brad · 01-28-2009, 01:02 PM

I want first crack at it if you can't find a trade...

pcmcobra · 01-28-2009, 02:48 PM

I have that same shifter on my 86 w/ a 4l80e

Nice piece.

70GMCer · 01-29-2009, 07:15 AM

ttt

01-28-2009, 07:44 AM	#2
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Lokar Auto Shifter & switch to trade ttt __________________ 1997 GMC Sierra Ext 1965 Mustang

01-28-2009, 09:49 AM	#3
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Lokar Auto Shifter & switch to trade I would be interested in the switch if you decide to sell. Thanks! John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

01-28-2009, 10:00 AM	#4
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Lokar Auto Shifter & switch to trade If I do sell, will only sell as a set. __________________ 1997 GMC Sierra Ext 1965 Mustang

01-28-2009, 01:02 PM	#5
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: Lokar Auto Shifter & switch to trade I want first crack at it if you can't find a trade... __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

01-28-2009, 02:48 PM	#6
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: Lokar Auto Shifter & switch to trade I have that same shifter on my 86 w/ a 4l80e Nice piece. __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native

01-27-2009, 04:01 PM	#1
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Lokar Auto Shifter & switch to trade Here's a Lokar shifter linkage part #ACA-1800 & a Lokar backup/neutral safety switch part #BL-1400U. These parts where on my 70 and are setup for a sbc with 350 turbo trans setting in the V8 place on the frame. I only have around 200 miles on the shifter linkage & have never wired up the switch. The switch was just mounted on the transmission pan. All parts look like new except where nuts have made contact with washers & shifter arm. Keep in mine that the switch can only be used for either backup lights, or neutral safety switch. You can't do both at the same time. I have a copy of the installation instructions for the shifter linkage, but not the switch. Easy though. All you do is 2 bolts to the pan & the switch lever makes contact with the shifter lever at the trans. I'm looking for a trade first before I sell these. I'm looking for a Holley 600 cfm, list #1850, "Base Plate" with "Vacuum Secondary, or equivalent, (no Double Pumper plate) & 2 bare, dual line float bowls, (center float). Plate must be in nice shape & without excessive shaft play or modifications. Please respond to thread.... Attached Images __________________ 1997 GMC Sierra Ext 1965 Mustang Last edited by 70GMCer; 01-28-2009 at 07:46 AM.

01-29-2009, 07:15 AM	#7
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Lokar Auto Shifter & switch to trade ttt __________________ 1997 GMC Sierra Ext 1965 Mustang



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.