|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-31-2009, 07:15 PM
|
#1 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
ECE trailing arms and Sway bars
As it says i have ECE square tube trailing arms and they have no holed for the sway bar to connect to. So some ideas i have are, Drill two holes all the way through and mount the pivots to them by 5in bolts and nuts, or cut two holes and weld some nuts flush. i am going for the first because it is so much easier and faster. my worry is the arms may lose some strength.
__________________
69 c-10 BBC  462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.  3.5/6in drop. My Build.
|
|
|
|
02-01-2009, 12:43 AM
|
#2 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: ECE trailing arms and Sway bars
bump
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
|
|
|
|
|
02-01-2009, 01:02 AM
|
#3 |
|
It's Better With Nitro
Join Date: Apr 2008
Location: Chino Hills, CA
Posts: 2,261
|
Re: ECE trailing arms and Sway bars
Here's my sway bar...
__________________
1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes |
|
|
|
|
02-01-2009, 01:05 AM
|
#4 |
|
someday it will be done!
Join Date: Sep 2004
Location: Lloydminster,AB. Canada
Posts: 1,620
|
Re: ECE trailing arms and Sway bars
If you are worried about losing strength,I would drill the holes oversized and sleeve it with piece of tubing that has the appropriate I.D. for your bolt to fit through.That or do the same thing,but use a sleeve that you can tap to the proper thread size to allow you to bolt from the top.
__________________
'72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore.    '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics |
|
|
|
|
02-02-2009, 12:13 AM
|
#5 |
|
Senior Member
Join Date: Jul 2005
Location: Winters Ca. 95694
Posts: 4,843
|
Re: ECE trailing arms and Sway bars
I did this same thing a few months ago and I went with the second way you mentioned. Now what if you weld a piece of 1/4" flat stock to the side bottom of it and drill and mount you sway bar to that?
Kevin LFD Inc. Last edited by Rokcrln; 02-04-2009 at 10:07 PM. |
|
|
|
|
02-02-2009, 06:23 PM
|
#6 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: ECE trailing arms and Sway bars
Thank your for the ideas guys. still not sure what one i will go with.
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
