WTT front drop springs for factory height - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67mater · 02-06-2009, 11:30 PM

I am deducing that my newly aquired project has 2.5" drop spindles and 2" drop springs. Slammed is not what I am going for, so anybody have a nice pair of factory height front 1/2 ton springs? on a 67 if it makes any difference, and I can get some pics. they look brand new, and I want similar quality for trade straight up or $80 so i can buy factory height.

67mater · 02-06-2009, 11:36 PM

oh, and based on a 32" factory height to the top of the wheel well, I measure 27.5", which is 2.5" spindles and 2" springs, but I can pull em out and measure if someone is serious.

meansting04 · 02-08-2009, 09:04 AM

I just took my stock 1/2 tons off if you want them pay the shipping and they are yours. They are off of a 70 chevy camper special. I can send pics if needed.

67mater · 02-08-2009, 10:08 AM

pics good, where are you at? how much do they weigh?

meansting04 · 02-08-2009, 10:13 AM

CA. 94535 they are about 25 30 lbs.

67mater · 02-09-2009, 06:56 PM

looks like $50 shipped, wish you were closer

sourkraut · 02-09-2009, 08:25 PM

I have a set from a 67' stock height. I will have to get a pic for you. If you want you can have them for the cost of shipping. They are fine other than dirty and need a good cleaning. If interested I can sandblast and powdercoat them for $40 plus shipping. Let me know either way my zip is 17022.

67mater · 02-10-2009, 11:48 PM

So l took a good look at the spindles and they are factory height spindles (just disc conversions) so now I gotta decide if I want factory springs too.

looks like $35 from PA.

finch · 02-11-2009, 12:01 AM

I have some out of my '70, we each pay shipping? I think it should be 15 bucks at the most to ship via Spee Dee Delivery. let me know if you decide to go with the stock height.

meansting04 · 02-11-2009, 12:50 AM

My offer still stands. I don't need your springs i will just give you mine if you pay shipping. good luck.

67mater · 02-11-2009, 12:50 PM

well, I don't think they are the drop springs I though they were. with a fender well at 28" and stock height spindles, the springs must have been cut 4". If you want these springs, you can have them for shipping. I found some factory heights, so I can compare, but they will lower your c10 to 28" just not sure how good the ride will be.

02-06-2009, 11:30 PM	#1
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	WTT front drop springs for factory height I am deducing that my newly aquired project has 2.5" drop spindles and 2" drop springs. Slammed is not what I am going for, so anybody have a nice pair of factory height front 1/2 ton springs? on a 67 if it makes any difference, and I can get some pics. they look brand new, and I want similar quality for trade straight up or $80 so i can buy factory height. __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-06-2009, 11:36 PM	#2
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: WTT front drop springs for factory height oh, and based on a 32" factory height to the top of the wheel well, I measure 27.5", which is 2.5" spindles and 2" springs, but I can pull em out and measure if someone is serious. __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-08-2009, 09:04 AM	#3
meansting04 Registered User Join Date: Aug 2008 Location: travis afb Posts: 304	Re: WTT front drop springs for factory height I just took my stock 1/2 tons off if you want them pay the shipping and they are yours. They are off of a 70 chevy camper special. I can send pics if needed. __________________ 67 gmc 1/2 ton, 5.0 v6, 4 speed SOLD!! 70 Chevy C-10, 355, th400, 3.73's 2/4 drop

02-08-2009, 10:08 AM	#4
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: WTT front drop springs for factory height pics good, where are you at? how much do they weigh? __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-08-2009, 10:13 AM	#5
meansting04 Registered User Join Date: Aug 2008 Location: travis afb Posts: 304	Re: WTT front drop springs for factory height CA. 94535 they are about 25 30 lbs. __________________ 67 gmc 1/2 ton, 5.0 v6, 4 speed SOLD!! 70 Chevy C-10, 355, th400, 3.73's 2/4 drop

02-09-2009, 06:56 PM	#6
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: WTT front drop springs for factory height looks like $50 shipped, wish you were closer __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-09-2009, 08:25 PM	#7
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: WTT front drop springs for factory height I have a set from a 67' stock height. I will have to get a pic for you. If you want you can have them for the cost of shipping. They are fine other than dirty and need a good cleaning. If interested I can sandblast and powdercoat them for $40 plus shipping. Let me know either way my zip is 17022. __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

02-10-2009, 11:48 PM	#8
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: WTT front drop springs for factory height So l took a good look at the spindles and they are factory height spindles (just disc conversions) so now I gotta decide if I want factory springs too. looks like $35 from PA. __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-11-2009, 12:01 AM	#9
finch Registered User Join Date: Dec 2007 Location: Sioux Falls, SD Posts: 365	Re: WTT front drop springs for factory height I have some out of my '70, we each pay shipping? I think it should be 15 bucks at the most to ship via Spee Dee Delivery. let me know if you decide to go with the stock height. __________________ Andy... '70 C/10 Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=298553 '71 K/20 Frame-off resto, SOLD!!! http://67-72chevytrucks.com/vboard/c...ct=2399&cat=12 '05 Silverado Z-71, CC SB, Daily Driver

02-11-2009, 12:50 AM	#10
meansting04 Registered User Join Date: Aug 2008 Location: travis afb Posts: 304	Re: WTT front drop springs for factory height My offer still stands. I don't need your springs i will just give you mine if you pay shipping. good luck. __________________ 67 gmc 1/2 ton, 5.0 v6, 4 speed SOLD!! 70 Chevy C-10, 355, th400, 3.73's 2/4 drop

02-11-2009, 12:50 PM	#11
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: WTT front drop springs for factory height well, I don't think they are the drop springs I though they were. with a fender well at 28" and stock height spindles, the springs must have been cut 4". If you want these springs, you can have them for shipping. I found some factory heights, so I can compare, but they will lower your c10 to 28" just not sure how good the ride will be. __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.