Have no stall now -weird - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slugish · 02-11-2009, 09:53 PM

i KNOW THIS IS ANOITHER DUMB POST BUT , HERE IT IS

* AFTER I INSTALLED A DIFFERENT CARB ON MY 400 SB, MY STALL DOSENT WORK . I USED TO BE ABLE TO POWER BRAKE TO ABOUT 2200 OR SO , NOW I HAVE NOTHING . IT ACTUALLY GOES FORWARD AT IDLE OF 900 RPMS , IF I DONT HOLD THE BRAKE . IS ANY OF THE LINKAGE TO THE CARB I MIGHT HAVE HOOKED UP WRONG . I WAS ACTUALLY ASHAMED TO POST THIS , BUT I FINALLY DID - OH WELL

Restrorob · 02-11-2009, 10:51 PM

Don't know what trans your running but;

Gander at your trans kick-down cable closer, Compare the cable hook-up location on the old carb to the replacement carb.... It could be in a slightly different location thus throwing the cable out of adjustment.

slugish · 02-13-2009, 12:17 AM

Thanks for the reply restrobob.

think youre right > must have something to do with the kickdown cable.

02-11-2009, 09:53 PM	#1
slugish Slugish Join Date: Jan 2005 Location: Earlysville, Va. Posts: 1,024	Have no stall now -weird i KNOW THIS IS ANOITHER DUMB POST BUT , HERE IT IS * AFTER I INSTALLED A DIFFERENT CARB ON MY 400 SB, MY STALL DOSENT WORK . I USED TO BE ABLE TO POWER BRAKE TO ABOUT 2200 OR SO , NOW I HAVE NOTHING . IT ACTUALLY GOES FORWARD AT IDLE OF 900 RPMS , IF I DONT HOLD THE BRAKE . IS ANY OF THE LINKAGE TO THE CARB I MIGHT HAVE HOOKED UP WRONG . I WAS ACTUALLY ASHAMED TO POST THIS , BUT I FINALLY DID - OH WELL

02-11-2009, 10:51 PM	#2
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: Have no stall now -weird Don't know what trans your running but; Gander at your trans kick-down cable closer, Compare the cable hook-up location on the old carb to the replacement carb.... It could be in a slightly different location thus throwing the cable out of adjustment. __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!* Last edited by Restrorob; 02-11-2009 at 10:53 PM.

02-13-2009, 12:17 AM	#3
slugish Slugish Join Date: Jan 2005 Location: Earlysville, Va. Posts: 1,024	Re: Have no stall now -weird Thanks for the reply restrobob. think youre right > must have something to do with the kickdown cable.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.