fleetside patch panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 02-15-2009, 07:06 PM

I have a long fleet bed thats pretty nice on the outside but rotten down low on the inside. I will cut out sections and ship them for patch panels. Let me know what you need and we will work a deal.

heavy71chevy · 02-15-2009, 07:09 PM

I need The rear section of the left side..got a pic?

djracer · 02-15-2009, 07:38 PM

pics

djracer · 02-15-2009, 07:39 PM

more

djracer · 02-15-2009, 07:41 PM

this thing also has an uncut air dash and some nice trailing arms.

msgross · 02-15-2009, 07:51 PM

how's the inner wheel wells?

djracer · 02-15-2009, 07:54 PM

I'll try to find time to pull the inner wheel wells and checkout that area!

My72BB · 02-15-2009, 08:02 PM

I need something to patch fuel doors for aftermarket saddle tanks...Halfway between cab and rear wheel and halfway up on both sides...say 12" X 12"???

Is this what you had in mind and how much?

Alan

djracer · 02-15-2009, 11:14 PM

how does 100.00 shipped sound for both sides.

My72BB · 02-16-2009, 08:24 AM

Thanks...I'll pass right now.

djracer · 02-16-2009, 07:07 PM

If that sounds high make a reasonable offer.

djracer · 02-16-2009, 07:10 PM

Quote:

Originally Posted by msgross

how's the inner wheel wells?

All of that area that can be seen with the tubs still in looks solid. it may have just a little at the rear where the tubs mount.

msgross · 02-16-2009, 07:11 PM

If it happens to be clean when you tear it apart let me know...

FITS2AT · 02-16-2009, 07:14 PM

How much for the two wheels archs?

djracer · 02-16-2009, 09:15 PM

Quote:

Originally Posted by FITS2AT

How much for the two wheels archs?

I'll put you in line after I see if msgross wants them.

FITS2AT · 02-16-2009, 09:20 PM

Sorry outer wheel archs.

djracer · 02-16-2009, 09:40 PM

I might be able to seperate the two pieces.

FITS2AT · 02-16-2009, 09:48 PM

Just let me know.I will take them if you do.

VDOG · 02-16-2009, 11:57 PM

I need half of the roof from the windshield to just above the gladd on the back window, passenger side to the middle of the pillars.

capriceutah · 02-17-2009, 02:11 AM

I need from the reflector light to the tail light on the passenger side.

02-15-2009, 07:06 PM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	fleetside patch panels I have a long fleet bed thats pretty nice on the outside but rotten down low on the inside. I will cut out sections and ship them for patch panels. Let me know what you need and we will work a deal. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-15-2009, 07:09 PM	#2
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Re: fleetside patch panels I need The rear section of the left side..got a pic? __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster

02-15-2009, 07:38 PM	#3
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels pics Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-15-2009, 07:39 PM	#4
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels more Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-15-2009, 07:41 PM	#5
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels this thing also has an uncut air dash and some nice trailing arms. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-15-2009, 07:51 PM	#6
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: fleetside patch panels how's the inner wheel wells? Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-15-2009, 07:54 PM	#7
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels I'll try to find time to pull the inner wheel wells and checkout that area! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-15-2009, 08:02 PM	#8
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: fleetside patch panels I need something to patch fuel doors for aftermarket saddle tanks...Halfway between cab and rear wheel and halfway up on both sides...say 12" X 12"??? Is this what you had in mind and how much? Alan

02-15-2009, 11:14 PM	#9
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels how does 100.00 shipped sound for both sides. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-16-2009, 08:24 AM	#10
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: fleetside patch panels Thanks...I'll pass right now.

02-16-2009, 07:07 PM	#11
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels If that sounds high make a reasonable offer. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-16-2009, 07:11 PM	#13
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: fleetside patch panels If it happens to be clean when you tear it apart let me know... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-16-2009, 07:14 PM	#14
FITS2AT Registered User Join Date: Oct 2006 Location: Dickson Tennessee Posts: 91	Re: fleetside patch panels How much for the two wheels archs? __________________

02-16-2009, 09:20 PM	#16
FITS2AT Registered User Join Date: Oct 2006 Location: Dickson Tennessee Posts: 91	Re: fleetside patch panels Sorry outer wheel archs. __________________

02-16-2009, 09:40 PM	#17
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels I might be able to seperate the two pieces. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

02-16-2009, 09:48 PM	#18
FITS2AT Registered User Join Date: Oct 2006 Location: Dickson Tennessee Posts: 91	Re: fleetside patch panels Just let me know.I will take them if you do. __________________

02-16-2009, 11:57 PM	#19
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Re: fleetside patch panels I need half of the roof from the windshield to just above the gladd on the back window, passenger side to the middle of the pillars.

02-17-2009, 02:11 AM	#20
capriceutah Registered User Join Date: Oct 2007 Location: Midvale, UT Posts: 40	Re: fleetside patch panels I need from the reflector light to the tail light on the passenger side.

Register or Log In To remove these advertisements.