Need some an fittings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

6600DURAMAX · 02-19-2009, 10:10 AM

Looking to buy some used or left over AN fittings from a previous build or just some someone is trying to get rid of.
I need:
For Trans. Fluid
6AN – (6) straight
6AN – (2) 90 degree

For Fuel Line
8AN – (6) straight
8AN – (20 90 degree
8AN – (1) 3/8’’ barb end straight

Also need
20ft of 6AN stainless hose
15ft of 8AN stainless hose

let me know if anyone has any of the above or at least something I can make work

Thanks guys

Wild83C10 · 02-19-2009, 11:50 AM

I have the following:

3 6AN 90s
1 6AN 45

1 4' section of 6AN hose
3 1' section of 6AN hose

I just sold a bunch of 6AN and 8AN hose at the swpameet last year.

I don't recommend using SS rubber lines for fuel. The fuel will eventually eat away at the hose and the vapors will seep through the hose and stink up the garage. I switched to teflon lined hose and my garage doesn't stink of fuel anymore.

6600DURAMAX · 02-19-2009, 12:21 PM

So is the Teflon hose have a stainless covering?? Or is it like the blue push lock type of hose?

cdowns · 02-19-2009, 01:13 PM

a good place for finding used fittings and hoses is racingjunk.com

Wild83C10 · 02-19-2009, 03:45 PM

The teflon hose is covered in SS braid just like the rubber hose. The overall diameter of the teflon hose is slightly smaller because of the teflon vs the rubber hose. But the teflon has a larger bend radius so you can't make as tight a bend. It is also more expensive.
It was worth it to me though. My wife was ready to kick the truck out of the garage since the smell from the fuel was so strong.

scatesracing · 02-20-2009, 12:34 AM

http://www.musclemotorsports.com/aer...ne---ftgs.html

check this place out.......... I found it five or six years ago

Wild83C10 · 02-20-2009, 04:23 PM

Wow those are some good prices. Nice find scatesracing!

scatesracing · 02-20-2009, 07:55 PM

glad I could help... I found that back in the dial up days....... 56k LOL. They also have "truck type traling arms" to I was thinking about ordering one to see if they will fit the 60s and 70s trucks???? only $50 Travis

02-19-2009, 10:10 AM	#1
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,124	Need some an fittings Looking to buy some used or left over AN fittings from a previous build or just some someone is trying to get rid of. I need: For Trans. Fluid 6AN – (6) straight 6AN – (2) 90 degree For Fuel Line 8AN – (6) straight 8AN – (20 90 degree 8AN – (1) 3/8’’ barb end straight Also need 20ft of 6AN stainless hose 15ft of 8AN stainless hose let me know if anyone has any of the above or at least something I can make work Thanks guys __________________ 1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio ..... 1971 CREWMAX Build.....at body shop for couple more years

02-19-2009, 11:50 AM	#2
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: Need some an fittings I have the following: 3 6AN 90s 1 6AN 45 1 4' section of 6AN hose 3 1' section of 6AN hose I just sold a bunch of 6AN and 8AN hose at the swpameet last year. I don't recommend using SS rubber lines for fuel. The fuel will eventually eat away at the hose and the vapors will seep through the hose and stink up the garage. I switched to teflon lined hose and my garage doesn't stink of fuel anymore. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

02-19-2009, 12:21 PM	#3
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,124	Re: Need some an fittings So is the Teflon hose have a stainless covering?? Or is it like the blue push lock type of hose? __________________ 1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio ..... 1971 CREWMAX Build.....at body shop for couple more years

02-19-2009, 01:13 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Need some an fittings a good place for finding used fittings and hoses is racingjunk.com __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

02-19-2009, 03:45 PM	#5
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: Need some an fittings The teflon hose is covered in SS braid just like the rubber hose. The overall diameter of the teflon hose is slightly smaller because of the teflon vs the rubber hose. But the teflon has a larger bend radius so you can't make as tight a bend. It is also more expensive. It was worth it to me though. My wife was ready to kick the truck out of the garage since the smell from the fuel was so strong. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

02-20-2009, 12:34 AM	#6
scatesracing Machinist Join Date: Sep 2007 Location: Derby Kansas Posts: 296	Re: Need some an fittings http://www.musclemotorsports.com/aer...ne---ftgs.html check this place out.......... I found it five or six years ago

02-20-2009, 04:23 PM	#7
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: Need some an fittings Wow those are some good prices. Nice find scatesracing! __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time Last edited by Wild83C10; 02-20-2009 at 04:24 PM.

02-20-2009, 07:55 PM	#8
scatesracing Machinist Join Date: Sep 2007 Location: Derby Kansas Posts: 296	Re: Need some an fittings glad I could help... I found that back in the dial up days....... 56k LOL. They also have "truck type traling arms" to I was thinking about ordering one to see if they will fit the 60s and 70s trucks???? only $50 Travis



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.