Seat belt Help! Kid on the way, need better belts!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bird7263 · 02-16-2009, 10:27 PM

Ok guys, I know that I am touching on a subject that has been brought up several time.. I am looking to put new seat belts in the 66. I have two cheezy belts in there now that are not stock. I really want to find a belt that self retracts on the sides.. Any body ever bought belts out of another rig or car and used them in there 60-66. I am looking for ideas.. And pics would be great..

I don't want to have to switch over to lap and should if I don't have too.. I just want Mamma and Jr to ride all summer with me to the car shows and have nice belts... Thanks guys

texanidiot25 · 02-16-2009, 10:31 PM

If you guys have the bolt hole in the B-pillar of the cab like the 67-72s, the 1st gen S10 belts work really well.

**Chevy Fleetside** · 02-16-2009, 11:22 PM

These are the belts that are in my truck. Luca used to sit in the middle facing me. He was 6 months in this picture and if you look next to him you can see the base for his car seat. Just a lap belt.

mateo1279 · 02-20-2009, 02:11 PM

When my kiddo was brand-new I had a similar base. The lap belt actually was able to snug down tighter across the bottom piece then my wife's toyota's shoulder belt!
Even with a normal car seat, it tightens down really well with the simple lap belt.

*LILRED66* · 02-20-2009, 07:36 PM

How about a set of these for factory lap/shoulder belts? I have never seen a set of these in person, however, I now know why so many cabs have the "existing weld nut" on the "B" pillar by your ear.

Big Fenders · 02-20-2009, 09:12 PM

Check out www.juliano's.com. They have what ever you need for bench seat or buckets. Retractors also

Woogeroo · 02-21-2009, 02:44 AM

I have a set of retractable shoulder belts from juliano's(mentioned above) for a bench seat in my '65 c10 with a bench seat.

I have also read good things about this companies belts from other people with trucks like ours:

http://gemstreetrods.com

-W

**ChiefRocka** · 02-21-2009, 09:11 AM

I put in belts in my truck as well for my kids. I just went to the wrecking yard and pulled the belts from the back-seats of G-bodys (Regal, Cutless, MonteCarlo, etc.)

I install three lap belts in my truck, using 1/4 plate and weld nuts on various locations in the floor...

02-16-2009, 10:27 PM	#1
bird7263 Urban Chop Shop Join Date: Dec 2006 Location: Tigard Oregon Posts: 264	Seat belt Help! Kid on the way, need better belts!!! Ok guys, I know that I am touching on a subject that has been brought up several time.. I am looking to put new seat belts in the 66. I have two cheezy belts in there now that are not stock. I really want to find a belt that self retracts on the sides.. Any body ever bought belts out of another rig or car and used them in there 60-66. I am looking for ideas.. And pics would be great.. I don't want to have to switch over to lap and should if I don't have too.. I just want Mamma and Jr to ride all summer with me to the car shows and have nice belts... Thanks guys __________________ 2003 Chevy Trailblazer LTZ, 2.5" Susp Lift, Tinted, HID's/LED interior/ Lot of upgrades and little mods 1965 Chevy 1/2T Longbox, soon to be a slammed shop truck Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=591266 Semper Fi Marines

02-16-2009, 10:31 PM	#2
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Seat belt Help! Kid on the way, need better belts!!! If you guys have the bolt hole in the B-pillar of the cab like the 67-72s, the 1st gen S10 belts work really well.

02-16-2009, 11:22 PM	#3
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: Seat belt Help! Kid on the way, need better belts!!! These are the belts that are in my truck. Luca used to sit in the middle facing me. He was 6 months in this picture and if you look next to him you can see the base for his car seat. Just a lap belt. Attached Images __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

02-20-2009, 02:11 PM	#4
mateo1279 Registered User Join Date: Jan 2007 Location: Oregon Posts: 169	Re: Seat belt Help! Kid on the way, need better belts!!! When my kiddo was brand-new I had a similar base. The lap belt actually was able to snug down tighter across the bottom piece then my wife's toyota's shoulder belt! Even with a normal car seat, it tightens down really well with the simple lap belt. __________________ 1962 Chevy Fleetside 283/TH350

02-20-2009, 07:36 PM	#5
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Seat belt Help! Kid on the way, need better belts!!! How about a set of these for factory lap/shoulder belts? I have never seen a set of these in person, however, I now know why so many cabs have the "existing weld nut" on the "B" pillar by your ear. Attached Images Last edited by LILRED66; 02-20-2009 at 09:52 PM.

02-20-2009, 09:12 PM	#6
Big Fenders Registered User Join Date: Mar 2008 Location: Tucson Arizona Posts: 264	Re: Seat belt Help! Kid on the way, need better belts!!! Check out www.juliano's.com. They have what ever you need for bench seat or buckets. Retractors also

02-21-2009, 02:44 AM	#7
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	Re: Seat belt Help! Kid on the way, need better belts!!! I have a set of retractable shoulder belts from juliano's(mentioned above) for a bench seat in my '65 c10 with a bench seat. I have also read good things about this companies belts from other people with trucks like ours: http://gemstreetrods.com -W

02-21-2009, 09:11 AM	#8
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Seat belt Help! Kid on the way, need better belts!!! I put in belts in my truck as well for my kids. I just went to the wrecking yard and pulled the belts from the back-seats of G-bodys (Regal, Cutless, MonteCarlo, etc.) I install three lap belts in my truck, using 1/4 plate and weld nuts on various locations in the floor... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 02-21-2009 at 09:11 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.