63 Double hump dash in a 65 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

orange66fleet · 02-20-2009, 02:53 PM

Has anyone ever put a earlier c-10 dash in a later truck. I am thinking of doing it to my project.

rookierodbuilder · 02-20-2009, 04:07 PM

I have thought about doing the same. however, it looks as if the ends will need a lot of sheet metal work to blend in with the a-pillar style of the 64-66 pickups. Other than that I dont see any reason why it would not work.

Rogue · 02-21-2009, 01:01 AM

I had put one in my old cab, but due to rust I have another.
Now I get to start over.
I am also using the 60-63 door panels.
Its a bit of work, but I will have the only '63 with a cheap windshield.

I was very pleased with the first one, but did not finish the ends out.
When I get back to mock up, i'll post some pics.

**Captainfab** · 02-22-2009, 02:13 AM

Most anything is possible if you have the desire and the skills to make it happen. Check out "My 1965 Build Thread" by Alan's classic, he put a '59 Impala dash is his '65. A little different, but might give you some ideas.

02-20-2009, 02:53 PM	#1
orange66fleet Lowered in Cleveland Join Date: Feb 2006 Location: Cleveland Posts: 120	63 Double hump dash in a 65 Has anyone ever put a earlier c-10 dash in a later truck. I am thinking of doing it to my project. Attached Images Last edited by orange66fleet; 02-20-2009 at 02:55 PM.

02-20-2009, 04:07 PM	#2
rookierodbuilder Registered User Join Date: Jan 2009 Location: Sharpsburg, Ky. Posts: 110	Re: 63 Double hump dash in a 65 I have thought about doing the same. however, it looks as if the ends will need a lot of sheet metal work to blend in with the a-pillar style of the 64-66 pickups. Other than that I dont see any reason why it would not work.

02-21-2009, 01:01 AM	#3
Rogue Airport Bum Join Date: Jan 2005 Location: Propwash (16Xray) D/FW, Texas Posts: 320	Re: 63 Double hump dash in a 65 I had put one in my old cab, but due to rust I have another. Now I get to start over. I am also using the 60-63 door panels. Its a bit of work, but I will have the only '63 with a cheap windshield. I was very pleased with the first one, but did not finish the ends out. When I get back to mock up, i'll post some pics. __________________ 1964 Chevrolet C-10 1941 Chevrolet coupe 1962 Thunderbird 1959 Edsel Villager 1963 Skylark

02-22-2009, 02:13 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 63 Double hump dash in a 65 Most anything is possible if you have the desire and the skills to make it happen. Check out "My 1965 Build Thread" by Alan's classic, he put a '59 Impala dash is his '65. A little different, but might give you some ideas. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 02-22-2009 at 02:14 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.