steel floor to wood - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*67/72junkie* · 02-21-2009, 02:12 PM

If anyone has a bad steel floor and would like to convert to wood I have all the parts.I had a complete wood floor bed that I sold the sides off of and was saving the rest to put a set of short sides with and get new wood kit and stainless strips.$325 for header panel,tubs, all cross supports,lower splash shields.rear wiring harness and brake and back up light sockets.These are nice pieces that I was saving to make me a show bed but the truck I just bought also has a nice woodbed setup so I can let this one go.I will be going to Rose hill VA in a week or so and can deliver anywhere along the way.I can get pics if interested.

DMARCUM123 · 02-21-2009, 05:07 PM

pm sent

Chevy_Man · 02-22-2009, 10:31 AM

Would you be willing to ship and do you have any pics? Could be interested .....

Eric

Tim c-10 · 02-22-2009, 11:03 PM

Where are you at in North Carolina? I am in Raleigh and if you still have the parts I would like to look at them.

Rufino · 02-23-2009, 09:33 AM

if these parts are still available im interested. can you post pics?

*67/72junkie* · 02-23-2009, 11:18 AM

Name: 100_1202.jpg
Views: 196
Size: 22.2 KB

Name: 100_1204.jpg
Views: 194
Size: 104.8 KB

Name: 100_1206.jpg
Views: 194
Size: 109.6 KB

Name: 100_1207.jpg
Views: 196
Size: 99.2 KB

I have inner tubs, header panel, all cross supports,lower splash shields,rear bed wiring harness and brake and backup light sockets. You would need 2 bedsides,wood,stainless strips and bolts . The parts I have are in good shape with surface rust only. Tubs and header panel are not dented or pitted. I purchased 2 goodmark sides to put with these parts an make a show bed for my 72 bb truck.I have recently purchased another 72 in ca and it has a very nice wood bed so I am selling this to have cash for my trip.

*67/72junkie* · 02-24-2009, 09:52 AM

I checked LMC and this parts list is over $500.00 for shortbed and $600.00 for longbed after market. Anybody who has put one of these together knows new after market tubs need more body work than used gm.I can deliver these free of charge to anyone going to the autofair or might be able to relay with someone going to the autofair.

STOCKISH · 02-24-2009, 10:21 AM

Interested in trading for some Big Block stuff?

*67/72junkie* · 02-24-2009, 08:41 PM

This woodbed setup has been sold to DMARCUM.I have another in the same condition that has not been disassembled yet.It is a long bed that the exterior of is beat up but not rusted the header panel and tubs are nice.I will disassemble it for anyone who is serious.

smokinstang70 · 02-25-2009, 10:47 PM

consider them sold if they are still available. VERY INTERESTED>

Thanks

02-21-2009, 02:12 PM	#1
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	steel floor to wood If anyone has a bad steel floor and would like to convert to wood I have all the parts.I had a complete wood floor bed that I sold the sides off of and was saving the rest to put a set of short sides with and get new wood kit and stainless strips.$325 for header panel,tubs, all cross supports,lower splash shields.rear wiring harness and brake and back up light sockets.These are nice pieces that I was saving to make me a show bed but the truck I just bought also has a nice woodbed setup so I can let this one go.I will be going to Rose hill VA in a week or so and can deliver anywhere along the way.I can get pics if interested.

02-21-2009, 05:07 PM	#2
DMARCUM123 Registered User Join Date: Sep 2006 Location: WAYNE, WV. Posts: 675	Re: steel floor to wood pm sent

02-22-2009, 10:31 AM	#3
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	Re: steel floor to wood Would you be willing to ship and do you have any pics? Could be interested ..... Eric __________________ 56 Chevy custom cab step side under construction 55 Chevy 210 68 SWB Stepside back burner under construction 72 Chevy LWB 84 CJ 7 05 Chevy 1500 Crew Cab 30X40 DOGHOUSE(shop) with many add ons

02-22-2009, 11:03 PM	#4
Tim c-10 Registered User Join Date: Oct 2008 Location: Raleigh, NC Posts: 32	Re: steel floor to wood Where are you at in North Carolina? I am in Raleigh and if you still have the parts I would like to look at them.

02-23-2009, 09:33 AM	#5
Rufino Registered User Join Date: Feb 2009 Location: Houston Texas Posts: 10	Re: steel floor to wood if these parts are still available im interested. can you post pics?

02-23-2009, 11:18 AM	#6
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: steel floor to wood I have inner tubs, header panel, all cross supports,lower splash shields,rear bed wiring harness and brake and backup light sockets. You would need 2 bedsides,wood,stainless strips and bolts . The parts I have are in good shape with surface rust only. Tubs and header panel are not dented or pitted. I purchased 2 goodmark sides to put with these parts an make a show bed for my 72 bb truck.I have recently purchased another 72 in ca and it has a very nice wood bed so I am selling this to have cash for my trip.

02-24-2009, 09:52 AM	#7
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: steel floor to wood I checked LMC and this parts list is over $500.00 for shortbed and $600.00 for longbed after market. Anybody who has put one of these together knows new after market tubs need more body work than used gm.I can deliver these free of charge to anyone going to the autofair or might be able to relay with someone going to the autofair.

02-24-2009, 10:21 AM	#8
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: steel floor to wood Interested in trading for some Big Block stuff? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-24-2009, 08:41 PM	#9
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: steel floor to wood This woodbed setup has been sold to DMARCUM.I have another in the same condition that has not been disassembled yet.It is a long bed that the exterior of is beat up but not rusted the header panel and tubs are nice.I will disassemble it for anyone who is serious.

02-25-2009, 10:47 PM	#10
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: steel floor to wood consider them sold if they are still available. VERY INTERESTED> Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.