700R4 question with pic.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LOHRTBT · 03-12-2003, 08:23 PM

Just to make sure...I did ask the other day but just wanted to make sure.

I just need to know if there is an o ring or Gasket under that screw for sure. That is where my leak is coming from.

Thanks
and no that is not my tranny lol

ElGracho · 03-12-2003, 08:28 PM

Yes, there is a squared off oring under the plastic 'sleeve' on the TV cable. It seals the hole where the tv cable goes through, not the bolt.

LOHRTBT · 03-12-2003, 08:35 PM

cool....now i just need to find the technical name for it since the part shop boys are dumb as dirt!! lol Thanks Joe!

87 STEPPER · 03-12-2003, 08:46 PM

Dave, just ask for the TV detent cable housing O-ring and go to chevy the'll have the IPC and then if he still dosen't understand you can point it out to him

86k10 · 03-12-2003, 08:51 PM

The seal for the TV cable is the same design as the one for the dipstick, it's a rubber sleeve with a washer built in the top of it that you put in the case.

MidnightBlues · 03-12-2003, 09:00 PM

I bought a new TV cable a few weeks ago and it came with the rubber seal.

LOHRTBT · 03-12-2003, 09:08 PM

Whoo hooo...I think I have one waiting at the parts store!

You all have been a great help.

He says it looks more like a Top Hat than an o ring does that sound about right....only .69 too!! hehe

ElGracho · 03-12-2003, 09:14 PM

Yeah, now that I think of it, that sounds right, more like a top hat.

LOHRTBT · 03-12-2003, 09:21 PM

Sweet! Thanks again! I will let ya know if that solves my problem. Hopefully it will.

03-12-2003, 08:23 PM	#1
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	700R4 question with pic.... Just to make sure...I did ask the other day but just wanted to make sure. I just need to know if there is an o ring or Gasket under that screw for sure. That is where my leak is coming from. Thanks and no that is not my tranny lol __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-12-2003, 08:28 PM	#2
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	Yes, there is a squared off oring under the plastic 'sleeve' on the TV cable. It seals the hole where the tv cable goes through, not the bolt. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

03-12-2003, 08:35 PM	#3
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	cool....now i just need to find the technical name for it since the part shop boys are dumb as dirt!! lol Thanks Joe! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-12-2003, 08:46 PM	#4
87 STEPPER STILL PLAYS WITH TRUX Join Date: Nov 2002 Location: Melbourne, Fla. Posts: 2,764	Dave, just ask for the TV detent cable housing O-ring and go to chevy the'll have the IPC and then if he still dosen't understand you can point it out to him __________________ ~~Bruce~~ MY 87 STEPPER MY 99 2D/WD TAHOE

03-12-2003, 08:51 PM	#5
86k10 Registered User Join Date: Feb 2003 Location: Bertrand, Nebraska Posts: 355	The seal for the TV cable is the same design as the one for the dipstick, it's a rubber sleeve with a washer built in the top of it that you put in the case. __________________ 98 Neon 97 Grand Prix GT 02 Grand Prix 40th Anniv. 86 GMC 5.0 77 Olds 98 6.6 REAL AMERICANS, DRIVE AMERICAN

03-12-2003, 09:00 PM	#6
MidnightBlues Registered User Join Date: Oct 2002 Location: The Netherlands Posts: 118	I bought a new TV cable a few weeks ago and it came with the rubber seal. __________________ Andre 1984 C10 SWB, 350/700R4

03-12-2003, 09:08 PM	#7
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Whoo hooo...I think I have one waiting at the parts store! You all have been a great help. He says it looks more like a Top Hat than an o ring does that sound about right....only .69 too!! hehe __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-12-2003, 09:14 PM	#8
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	Yeah, now that I think of it, that sounds right, more like a top hat. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

03-12-2003, 09:21 PM	#9
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Sweet! Thanks again! I will let ya know if that solves my problem. Hopefully it will. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.