Cowl hood - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ApeKing · 03-13-2009, 10:36 AM

Where would I find a steel cowl hood for my '65?

62 short step · 03-13-2009, 11:41 AM

I dont think you will, I havent seen any from suppliers. Only one I have seen was a member here made one. I forgot who it was.

kizer · 03-13-2009, 12:30 PM

Here you go.
http://67-72chevytrucks.com/vboard/s...d.php?t=332920

TwiggyTheDrummer · 03-13-2009, 04:31 PM

That's going to be your only chance.

62 short step · 03-13-2009, 06:16 PM

Quote:

Originally Posted by kizer

Here you go.
http://67-72chevytrucks.com/vboard/s...d.php?t=332920

Thanks! I knew somebody would get the link.

TwiggyTheDrummer · 03-13-2009, 07:06 PM

Just don't get a fiberglass cowl hood from US Body. Or else ou'll do what my buddy and I had to do.

chevytrucknut · 03-13-2009, 07:20 PM

The hood that Dan at Sick Industries makes is turely a work of art. Its all chevy steel from a donor truck. He does such a nice job finishing it that you can even see any welds on the under side and it looks stock. I like the fact that it still has the double "spear" shape on the hood and it actually is a cowl induction and is over the cowl.

TwiggyTheDrummer · 03-13-2009, 07:23 PM

Quote:

Originally Posted by chevytrucknut

I like the fact that it still has the double "spear" shape on the hood and it actually is a cowl induction and is over the cowl.

You're right on the design and welds, I couldn't see a single problem from the pictures. I wish mine had the spear molded in. That's actually one of the big disappointments besides the overall quality.

redsean · 03-14-2009, 03:56 PM

chech out my thread
http://67-72chevytrucks.com/vboard/s...d.php?t=332920

its the hood that chevytrucknut is refering to. they are the best thing out there that i have seen

( i did not notice that some one already put the link up got to read better oops)

03-13-2009, 10:36 AM	#1
ApeKing Trailers are for BOATS! Join Date: Dec 2008 Location: Douglasville Georgia Posts: 208	Cowl hood Where would I find a steel cowl hood for my '65? __________________ The Rod Barons C.C. CSA

03-13-2009, 11:41 AM	#2
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Cowl hood I dont think you will, I havent seen any from suppliers. Only one I have seen was a member here made one. I forgot who it was. __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20 Last edited by 62 short step; 03-13-2009 at 11:42 AM.

03-13-2009, 12:30 PM	#3
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: Cowl hood Here you go. http://67-72chevytrucks.com/vboard/s...d.php?t=332920 __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary

03-13-2009, 04:31 PM	#4
TwiggyTheDrummer Keep It Simple Stupid.. Nope.. Join Date: Jan 2009 Location: Live Oak, FL Posts: 665	Re: Cowl hood That's going to be your only chance. __________________ 1963 GMC SWB Fleetside in Sunburst Orange Metallic 305E V6 w/ Plaid VC, Powerglide, BOSS 313 20" Chrome Wheels, Kumho Ecsta STX 275/45/R20's, Alpine/Clarion System, Dynomax Exhaust Old custom classic trucks have soul. Their dashboards aren't plastic, and they've survived both the best and worst of what the 20th century had to offer. For the owners of these trucks, it's often the same story. Through both good and bad times they persevered, until one day they could turn the key and roll up in a customized truck everyone with good taste would admire. – Custom Classic Trucks

03-13-2009, 07:06 PM	#6
TwiggyTheDrummer Keep It Simple Stupid.. Nope.. Join Date: Jan 2009 Location: Live Oak, FL Posts: 665	Re: Cowl hood Just don't get a fiberglass cowl hood from US Body. Or else ou'll do what my buddy and I had to do. __________________ 1963 GMC SWB Fleetside in Sunburst Orange Metallic 305E V6 w/ Plaid VC, Powerglide, BOSS 313 20" Chrome Wheels, Kumho Ecsta STX 275/45/R20's, Alpine/Clarion System, Dynomax Exhaust Old custom classic trucks have soul. Their dashboards aren't plastic, and they've survived both the best and worst of what the 20th century had to offer. For the owners of these trucks, it's often the same story. Through both good and bad times they persevered, until one day they could turn the key and roll up in a customized truck everyone with good taste would admire. – Custom Classic Trucks

03-13-2009, 07:20 PM	#7
chevytrucknut Registered User Join Date: Oct 2003 Location: Battleground, Washington Posts: 177	Re: Cowl hood The hood that Dan at Sick Industries makes is turely a work of art. Its all chevy steel from a donor truck. He does such a nice job finishing it that you can even see any welds on the under side and it looks stock. I like the fact that it still has the double "spear" shape on the hood and it actually is a cowl induction and is over the cowl. __________________ '77 GMC SWB '66 SNB (Project) Battle Ground, WA

03-14-2009, 03:56 PM	#9
redsean Registered User Join Date: Nov 2008 Location: florence ky Posts: 51	Re: Cowl hood chech out my thread http://67-72chevytrucks.com/vboard/s...d.php?t=332920 its the hood that chevytrucknut is refering to. they are the best thing out there that i have seen ( i did not notice that some one already put the link up got to read better oops) Last edited by redsean; 03-14-2009 at 03:58 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.