Parting a 67 no rust AZ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CPNE** · 03-18-2009, 12:02 PM

IF the cab makes it to Grendel and IF he can get his transport there and IF there is room put me in line for that bed. Don't need tailgate but if you have a thrashed (bowed, beat, dented) tailgate you are junking I'll take it.

**t korinek** · 03-18-2009, 11:31 PM

Deweychop $85 shipped for the auto column & linkage.

1972SuperCheyenne, I'll post more pics of the cab, I cant guarantee that there's never been any bodywork done on it without getting it sand blasted, rockers & cab corners are original.
There is rust scale under the chrome sill plates, its not rusted through, there is rust scale at the lower kick panels, not rusted through. This is as rust free as I ever see, but not completely rust free. It still has the original tar paper, sound deadner on the floor. I'll sell the cab alone for $625 I'll give you until this time friday to decide if you want it.

There are a lot of minnesotans, michigans & canadian people here buying stuff to take back & I'll put this stuff on hold till you guys figure out if you want it, but I don't want to miss the window of opportunity as they will be going home soon, hope you understand about the time frame.

grendel your next in line on the cab & doors if 72Super passes. The front clip sold locally on Monday. The cab is pretty much bare now, the PO had taken a lot off it, Passenger door is complete, with latches & glass & wings, driver side is missing regulator & inside door latch hardware. windshield & rear glass still in it . This is a low hump cab. I have the hump boxed & will wait for your ok to ship, if we dont ship I owe you $15

CPNE I'll throw in a tailgate if this works out & could also send your other front end parts with it also.

**t korinek** · 03-18-2009, 11:35 PM

more pics

**t korinek** · 03-18-2009, 11:38 PM

more cab pics

**t korinek** · 03-18-2009, 11:43 PM

The last of the cab pics, I don't have any of the area around the sill vents, will get them tomorrow.

nds68 I have blue belts, I'll get pics

*FormerMember* · 03-19-2009, 08:39 AM

I'll pass on the cab then. I don't want to deal with rust at all.

STOCKISH · 03-19-2009, 09:14 AM

I will try to get something set up today as far as getting it shipped. I will get back to you as soon as I can. Thanks

**CPNE** · 03-19-2009, 01:01 PM

Quote:

Originally Posted by grendel

I'll pass on the cab then. I don't want to deal with rust at all.

Guess I may be passing on the bed then too, since transport may not come your way. I still want the 3/4 ton disk brake drag link and sway bar with mounts however.

Thanks

deweychop · 03-24-2009, 06:33 PM

Quote:

Originally Posted by t korinek

Deweychop $85 shipped for the auto column & linkage.

Can you throw in all the brackets that come with that column, and all hardware for the linkage? I think there's a twisted bracket, but I'm not 100% sure yet.

BTW.... I got that cab cut in the mail. Nice piece, thank you.

STOCKISH · 03-24-2009, 08:52 PM

Sure wish someone could get this cab a little closer to the east coast for me.

**CPNE** · 03-25-2009, 08:46 AM

Quote:

Originally Posted by 1972SuperCheyenne

Sure wish someone could get this cab a little closer to the east coast for me.

I don't control shipping or else I'd help. I'm relyiing on a friend of a friend and its up in the air as to if and when right now.

STOCKISH · 03-25-2009, 03:21 PM

I know man. Thanks though.

03-18-2009, 12:02 PM	#1
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: Parting a 67 no rust AZ IF the cab makes it to Grendel and IF he can get his transport there and IF there is room put me in line for that bed. Don't need tailgate but if you have a thrashed (bowed, beat, dented) tailgate you are junking I'll take it. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-18-2009, 11:31 PM	#2
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: Parting a 67 no rust AZ Deweychop $85 shipped for the auto column & linkage. 1972SuperCheyenne, I'll post more pics of the cab, I cant guarantee that there's never been any bodywork done on it without getting it sand blasted, rockers & cab corners are original. There is rust scale under the chrome sill plates, its not rusted through, there is rust scale at the lower kick panels, not rusted through. This is as rust free as I ever see, but not completely rust free. It still has the original tar paper, sound deadner on the floor. I'll sell the cab alone for $625 I'll give you until this time friday to decide if you want it. There are a lot of minnesotans, michigans & canadian people here buying stuff to take back & I'll put this stuff on hold till you guys figure out if you want it, but I don't want to miss the window of opportunity as they will be going home soon, hope you understand about the time frame. grendel your next in line on the cab & doors if 72Super passes. The front clip sold locally on Monday. The cab is pretty much bare now, the PO had taken a lot off it, Passenger door is complete, with latches & glass & wings, driver side is missing regulator & inside door latch hardware. windshield & rear glass still in it . This is a low hump cab. I have the hump boxed & will wait for your ok to ship, if we dont ship I owe you $15 CPNE I'll throw in a tailgate if this works out & could also send your other front end parts with it also. Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-18-2009, 11:35 PM	#3
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: Parting a 67 no rust AZ more pics Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-18-2009, 11:38 PM	#4
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: Parting a 67 no rust AZ more cab pics Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-18-2009, 11:43 PM	#5
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,195	Re: Parting a 67 no rust AZ The last of the cab pics, I don't have any of the area around the sill vents, will get them tomorrow. nds68 I have blue belts, I'll get pics Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-19-2009, 08:39 AM	#6
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Parting a 67 no rust AZ I'll pass on the cab then. I don't want to deal with rust at all.

03-19-2009, 09:14 AM	#7
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Parting a 67 no rust AZ I will try to get something set up today as far as getting it shipped. I will get back to you as soon as I can. Thanks __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-24-2009, 08:52 PM	#10
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Parting a 67 no rust AZ Sure wish someone could get this cab a little closer to the east coast for me. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-25-2009, 03:21 PM	#12
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Parting a 67 no rust AZ I know man. Thanks though. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.