steering wheel install help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pseigmund · 03-23-2009, 08:50 AM

Hi All,

I need some help installing a steering wheel (1970, 3/4 ton, no tilt). I took the old steering wheel off (looks like from a later model, whoever installed it had to cut the back of it off to get it to fit). With the steering wheel off, I have the turn signal cam. I have nothing else between the tun signal cam and the back of the steering wheel. Looking at the LMC catalog it looks like I need a few more parts (spring & plastic housing). Does anyone know the order of installation and if I will need any other parts? I did bolt the steering wheel on and it had about 1/2 inch of vertical play in it. Will installation of the remaining parts take this play out? The steering wheel I have is out of a mid 70's truck so maybe this is causing some of the play as well. I am not going to mess with the horn button stuff right now (I have the horn disconnected).

Thanks for any help.

gcburdic · 03-23-2009, 09:00 AM

check this thread out....http://67-72chevytrucks.com/vboard/s...d.php?t=258402

**LockDoc** · 03-23-2009, 09:08 AM

-
Here are a couple more.

http://67-72chevytrucks.com/vboard/s....php?p=3085732

http://67-72chevytrucks.com/vboard/s...ad.php?t=79039

http://67-72chevytrucks.com/vboard/s....php?p=2995598

LockDoc

pseigmund · 03-23-2009, 12:06 PM

Thanks for the references. Does the LMC catalog have the correct parts in the correct order? Does the spring fit between the bearing and the plastic housing (item #11 in catalog)?

Thanks again.

gcburdic · 03-23-2009, 12:25 PM

Look at that thread I sent you....they talk about that....from what they say, I don't think it is shown in the correct order

03-23-2009, 09:00 AM	#2
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,299	Re: steering wheel install help check this thread out....http://67-72chevytrucks.com/vboard/s...d.php?t=258402 __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

03-23-2009, 09:08 AM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 26,076	Re: steering wheel install help - Here are a couple more. http://67-72chevytrucks.com/vboard/s....php?p=3085732 http://67-72chevytrucks.com/vboard/s...ad.php?t=79039 http://67-72chevytrucks.com/vboard/s....php?p=2995598 LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-23-2009, 12:06 PM	#4
pseigmund Registered User Join Date: Feb 2009 Location: Whitefish, MT Posts: 27	Re: steering wheel install help Thanks for the references. Does the LMC catalog have the correct parts in the correct order? Does the spring fit between the bearing and the plastic housing (item #11 in catalog)? Thanks again.

03-23-2009, 12:25 PM	#5
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,299	Re: steering wheel install help Look at that thread I sent you....they talk about that....from what they say, I don't think it is shown in the correct order __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

03-23-2009, 08:50 AM	#1
pseigmund Registered User Join Date: Feb 2009 Location: Whitefish, MT Posts: 27	steering wheel install help Hi All, I need some help installing a steering wheel (1970, 3/4 ton, no tilt). I took the old steering wheel off (looks like from a later model, whoever installed it had to cut the back of it off to get it to fit). With the steering wheel off, I have the turn signal cam. I have nothing else between the tun signal cam and the back of the steering wheel. Looking at the LMC catalog it looks like I need a few more parts (spring & plastic housing). Does anyone know the order of installation and if I will need any other parts? I did bolt the steering wheel on and it had about 1/2 inch of vertical play in it. Will installation of the remaining parts take this play out? The steering wheel I have is out of a mid 70's truck so maybe this is causing some of the play as well. I am not going to mess with the horn button stuff right now (I have the horn disconnected). Thanks for any help.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.