So I got a couple of square bodies on trade this weekend - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zimmstoy · 03-22-2009, 11:21 PM

What are these things worth? I need to get them road worthy again but do plan to sell them once I get them running here in the next few weeks.

1975 Crew Cab Dually 2wd - 454 with a Gear Vendors Overdrive

1978 GMC Jimmy 2wd - 4/6 Drop, Runs Great but has rough interior, relatively rust free but not perfect, needs brakes work very badly!

Pics are attached, definitely want feedback.

I traded my 76 Longbed pickup for these!

zimmstoy · 03-22-2009, 11:22 PM

last pic

bigblock73 · 03-22-2009, 11:24 PM

Are you sure the Jimmy is an 82? It has an older front clip on it then. It appears to be a 77 or 78.

FYI - WIW post are not allowed by non-subscribers.

Nice trucks though.

Blazer Eagle · 03-22-2009, 11:36 PM

i think 78's had a fuel door and the 77's had yellow trim so it might be a 76

bigblock73 · 03-22-2009, 11:38 PM

Quote:

Originally Posted by Blazer Eagle

i think 78's had a fuel door and the 77's had yellow trim so it might be a 76

Perhaps, but the high back bucket seats would say otherwise...they weren't available until 77.

Good catch on the 77 trim...I missed that.

Who knows what is original on this thing...it's an old truck that appears to have lived a hard life.

The 6th digit if the VIN will tell us.

zimmstoy · 03-22-2009, 11:40 PM

Your right i did a typo, it is actually a 78 according to the title and just signed up as a site supporter!

gchemist · 03-23-2009, 12:34 AM

I would love the 78 with a LS 5.3 conversion!!

Conundrum · 03-23-2009, 06:26 AM

I wouldn't mind picking up either of those!

Jonboy · 03-23-2009, 08:50 AM

The Jimmy is a very rust free truck. It was mine a few years ago. The drop is all of the suspension out of my red 77 convertible. These were traded to a friend during my divorce, and then traded back to Scott. When I bought it, the guy almost cried when we were loading it on the trailer, he had owned it since it was just a couple of years old. I am going down to help clean these up in a couple of weeks, so they should be good to go soon. I think the dually would make a great start for a shortbed conversion, especially with the 454 and overdrive.

Blazer Eagle · 03-23-2009, 10:09 AM

so that means 79 was the first year with the gas door

**old Rusty C10** · 03-23-2009, 10:16 AM

thank you for signing up as a supporter! in your area those trucks are worth more than in my area.. so guys from the south need to answer you regarding value

zimmstoy · 03-23-2009, 10:34 AM

Glad to help out the site. I have had over 7 67-99 trucks already and the site has been invaluable to me!

dswancutt · 03-23-2009, 11:21 AM

Quote:

Originally Posted by Blazer Eagle

so that means 79 was the first year with the gas door

Yes, there may have been some very late build 78 that have the gas door as a rolling model change, but every 78 that I have seen and the ones I own (2 of them) has the fuel cap. My 78's are both July 78 builds from the Flint plant.

Anyway, nice score on the trades to get this back on subject.

87Bob · 03-23-2009, 04:00 PM

Was that overdrive from the factory? or an aftermarket job? I'd love to get one for my 85 C/10

jchav62 · 03-23-2009, 05:16 PM

Gear Vendor units are aftermarket. Great units! That alone raises the value of that dually.

Both vehicles are very nice!

Skirkpat · 03-23-2009, 05:48 PM

I would be interested in the Jimmy when you get around to turning it. We don't find alot of "un"rusty projects around here.

vern350 · 03-23-2009, 05:49 PM

Nice trucks, looks like a good score. Hopefully things work your way.

zimmstoy · 03-23-2009, 08:39 PM

Thanks guys. Vern I hope so. I really need to get my other project finished and then will start looking for a 69-75 Blazer!

03-22-2009, 11:21 PM	#1
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	So I got a couple of square bodies on trade this weekend What are these things worth? I need to get them road worthy again but do plan to sell them once I get them running here in the next few weeks. 1975 Crew Cab Dually 2wd - 454 with a Gear Vendors Overdrive 1978 GMC Jimmy 2wd - 4/6 Drop, Runs Great but has rough interior, relatively rust free but not perfect, needs brakes work very badly! Pics are attached, definitely want feedback. I traded my 76 Longbed pickup for these! Attached Images Last edited by zimmstoy; 03-22-2009 at 11:46 PM. Reason: Wrong year on the Jimmy - changed from 1982 to 1978

03-22-2009, 11:22 PM	#2
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: So I got a couple of square bodies on trade this weekend last pic Attached Images

03-22-2009, 11:24 PM	#3
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: So I got a couple of square bodies on trade this weekend Are you sure the Jimmy is an 82? It has an older front clip on it then. It appears to be a 77 or 78. FYI - WIW post are not allowed by non-subscribers. Nice trucks though. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

03-22-2009, 11:36 PM	#4
Blazer Eagle Registered User Join Date: Oct 2008 Location: PLacerville, CA Posts: 195	Re: So I got a couple of square bodies on trade this weekend i think 78's had a fuel door and the 77's had yellow trim so it might be a 76

03-22-2009, 11:40 PM	#6
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: So I got a couple of square bodies on trade this weekend Your right i did a typo, it is actually a 78 according to the title and just signed up as a site supporter! Last edited by zimmstoy; 03-22-2009 at 11:49 PM.

03-23-2009, 12:34 AM	#7
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: So I got a couple of square bodies on trade this weekend I would love the 78 with a LS 5.3 conversion!! __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

03-23-2009, 06:26 AM	#8
Conundrum Registered User Join Date: Oct 2008 Location: Parsons, KS Posts: 652	Re: So I got a couple of square bodies on trade this weekend I wouldn't mind picking up either of those! __________________ 74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r http://67-72chevytrucks.com/vboard/s...d.php?t=460030 97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver 220,000 miles, all stock for now

03-23-2009, 08:50 AM	#9
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: So I got a couple of square bodies on trade this weekend The Jimmy is a very rust free truck. It was mine a few years ago. The drop is all of the suspension out of my red 77 convertible. These were traded to a friend during my divorce, and then traded back to Scott. When I bought it, the guy almost cried when we were loading it on the trailer, he had owned it since it was just a couple of years old. I am going down to help clean these up in a couple of weeks, so they should be good to go soon. I think the dually would make a great start for a shortbed conversion, especially with the 454 and overdrive.

03-23-2009, 10:09 AM	#10
Blazer Eagle Registered User Join Date: Oct 2008 Location: PLacerville, CA Posts: 195	Re: So I got a couple of square bodies on trade this weekend so that means 79 was the first year with the gas door

03-23-2009, 10:16 AM	#11
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	Re: So I got a couple of square bodies on trade this weekend thank you for signing up as a supporter! in your area those trucks are worth more than in my area.. so guys from the south need to answer you regarding value __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-23-2009, 10:34 AM	#12
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: So I got a couple of square bodies on trade this weekend Glad to help out the site. I have had over 7 67-99 trucks already and the site has been invaluable to me!

03-23-2009, 04:00 PM	#14
87Bob Registered User Join Date: Nov 2007 Location: Franklin Indiana Posts: 635	Re: So I got a couple of square bodies on trade this weekend Was that overdrive from the factory? or an aftermarket job? I'd love to get one for my 85 C/10 __________________ My Truck's not leaking its marking its territory!

03-23-2009, 05:16 PM	#15
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: So I got a couple of square bodies on trade this weekend Gear Vendor units are aftermarket. Great units! That alone raises the value of that dually. Both vehicles are very nice! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

03-23-2009, 05:48 PM	#16
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: So I got a couple of square bodies on trade this weekend I would be interested in the Jimmy when you get around to turning it. We don't find alot of "un"rusty projects around here.

03-23-2009, 05:49 PM	#17
vern350 like a rock Join Date: Nov 2004 Location: Ontario, Canada Posts: 517	Re: So I got a couple of square bodies on trade this weekend Nice trucks, looks like a good score. Hopefully things work your way.



Register or Log In To remove these advertisements.

03-23-2009, 08:39 PM	#18
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: So I got a couple of square bodies on trade this weekend Thanks guys. Vern I hope so. I really need to get my other project finished and then will start looking for a 69-75 Blazer!

Register or Log In To remove these advertisements.