Question of the Day - Power Steering - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zimmstoy · 03-25-2009, 11:00 AM

Hey all,

Working on this 1 ton dually (1975). I have to replace the steering box and steering pump. Here is my question:

Will a steering box and pump from a 6.2 Diesel Truck work on a 454 Truck?

The parts truck I found I think is an early 80's Diesel Suburban. Both have the Hydroboost setup.

Thanks,
Scott

**old Rusty C10** · 03-25-2009, 05:32 PM

Anyone can help this man out??

red caddy · 03-25-2009, 11:30 PM

If you have a parts counterman you trust, have him run the numbers for you, it's more than likely that both boxes are Saginaw's (might use a common casting) and will interchange, might have different ratio's or input shaft diameters. Nothing a little fabricobbeling can't fix... Run the part number on what you have and see what else it was used in, a trip thru a Hollander's interchange CD might be enlightening RED (My local NAPA manager is old school, and has a library of the old picture catalogs. There's gold in them thar books.)

zimmstoy · 03-26-2009, 01:09 AM

Thanks Fellas.

DirtyLarry · 03-26-2009, 01:10 AM

The gear box definitly will and the pump should too but you may have to change the pulley.

03-25-2009, 11:00 AM	#1
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Question of the Day - Power Steering Hey all, Working on this 1 ton dually (1975). I have to replace the steering box and steering pump. Here is my question: Will a steering box and pump from a 6.2 Diesel Truck work on a 454 Truck? The parts truck I found I think is an early 80's Diesel Suburban. Both have the Hydroboost setup. Thanks, Scott

03-25-2009, 05:32 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Question of the Day - Power Steering Anyone can help this man out?? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-25-2009, 11:30 PM	#3
red caddy Registered User Join Date: Dec 2008 Location: Venice Florida Posts: 83	Re: Question of the Day - Power Steering If you have a parts counterman you trust, have him run the numbers for you, it's more than likely that both boxes are Saginaw's (might use a common casting) and will interchange, might have different ratio's or input shaft diameters. Nothing a little fabricobbeling can't fix... Run the part number on what you have and see what else it was used in, a trip thru a Hollander's interchange CD might be enlightening RED (My local NAPA manager is old school, and has a library of the old picture catalogs. There's gold in them thar books.)

03-26-2009, 01:09 AM	#4
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: Question of the Day - Power Steering Thanks Fellas.

03-26-2009, 01:10 AM	#5
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Re: Question of the Day - Power Steering The gear box definitly will and the pump should too but you may have to change the pulley. __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.