original heater hose routing picture request - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sport/Truck · 03-27-2009, 04:59 PM

I'm getting ready to put them on and was wondering how they lay in the engine bay. I think the one that goes to the radiator has a clip on the inner fender. I'm wondering the one that goes to the block also goes through the clip holder as well.
Anyone have a good picture or diagram?
s/t

JimKshortstep4x4 · 03-27-2009, 07:19 PM

Here is a diagram.

Jim

Sport/Truck · 03-27-2009, 08:01 PM

Thanks Jim! It appears to have a clip for the hoses that's not used on the inner fenders with the I6 and the manual transmission setup.
The clip is mounted to the inner fender on the Auto trans isn't it?
Can someone confirm this?
s/t

Botietruck · 03-27-2009, 08:50 PM

s/t, I looked at some old pics of my I-6 set-up and you are correct. There is a heater hose clamp/clip that clips around both heater hoses, but it is not fastened to the inner fender. It looks to be in about the same location as the one in the diagram that Jim posted.

03-27-2009, 04:59 PM	#1
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	original heater hose routing picture request I'm getting ready to put them on and was wondering how they lay in the engine bay. I think the one that goes to the radiator has a clip on the inner fender. I'm wondering the one that goes to the block also goes through the clip holder as well. Anyone have a good picture or diagram? s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe. Last edited by Sport/Truck; 03-27-2009 at 05:01 PM.

03-27-2009, 07:19 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: original heater hose routing picture request Here is a diagram. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC Last edited by JimKshortstep4x4; 07-14-2009 at 12:52 PM.

03-27-2009, 08:01 PM	#3
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: original heater hose routing picture request Thanks Jim! It appears to have a clip for the hoses that's not used on the inner fenders with the I6 and the manual transmission setup. The clip is mounted to the inner fender on the Auto trans isn't it? Can someone confirm this? s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

03-27-2009, 08:50 PM	#4
Botietruck '71 chevy s.bed/s.side Join Date: Mar 2005 Location: Chesapeake, VA Posts: 1,571	Re: original heater hose routing picture request s/t, I looked at some old pics of my I-6 set-up and you are correct. There is a heater hose clamp/clip that clips around both heater hoses, but it is not fastened to the inner fender. It looks to be in about the same location as the one in the diagram that Jim posted. __________________ STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.