what to do with this - The 1947 - Present Chevrolet & GMC Truck Message Board Network

truckman32 · 03-15-2003, 08:38 PM

to start i'm not a body repair man but (i can do it) with some help from you all, i am a painter though not a pro but well you know lol,my ? is what do i do to get rid of i guess it's called pitting as you will see in the pictures i was sanding my 62 fleet bed tody and ran into this pitting what do i do to make this smooth,and after i make it smooth what next.i have painted some vehicles for people but the body work was allready done .so now that i'm restoreing this truck myself i have to learn bodywork since i can't afford to pay somebody else

*Randy70C-10* · 03-15-2003, 08:55 PM

Sandblast it clean, then prime and sand, prime and sand......keep priming and sanding until the pits are gone.

tom hand · 03-15-2003, 09:05 PM

Randys method will work fine if there is enough metal left. Looks like some of those pits go all the way thru the metal. If you sandblast it till all the rust is gone you may find something that resembles swiss cheeze. I would cut it out and make a patch panel to weld in.

*Randy70C-10* · 03-15-2003, 09:53 PM

Yeah, forgot to mention that if you get carried away with sandblasting, the entire truck could disappear.

truckman32 · 03-15-2003, 09:54 PM

no the pits don't go all the way through there not even rust pits just clean pits,actually it looks like somebody might of blasted a little to close to the panel and caused the pitting if it is pitting i don't know just guessing ,i'm going to sand on the other side tommrrow and see if it's the same way,and i'll let you know. the little holes you see looks like someone might have pulled a little dent out at sometime,the truck body is very solid i haven't found a drop of body filler in it no where,i bought it from jacquesdean from the 60-66 parts board i think he just started sanding in that area and stopped,so i decided to fix it first,before it got out of hand ,

ccsrcr · 03-15-2003, 11:21 PM

You can use spot putty to fill in the pits, then sand the spot putty , and primer the area.

72 CustomCamper · 03-16-2003, 02:31 AM

I'd go with what's called high build, or high mill primer. It is a poly primer that goes on thick, 3 coats = thickness of a penny. Then block sand it.

Chuck

72K10 · 03-16-2003, 10:18 AM

I agree with ccsrcr; pitting is usually filled with automotive glazing putty. That's exactly what it's for. Sand it to bare metal, primer it, then putty. Primering and sanding over and over again would do it, but if you were using regular primer, it would take probably 25 coats or more. Don't know about the high build primer, but sounds like it would work as well.

03-15-2003, 08:38 PM	#1
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	what to do with this to start i'm not a body repair man but (i can do it) with some help from you all, i am a painter though not a pro but well you know lol,my ? is what do i do to get rid of i guess it's called pitting as you will see in the pictures i was sanding my 62 fleet bed tody and ran into this pitting what do i do to make this smooth,and after i make it smooth what next.i have painted some vehicles for people but the body work was allready done .so now that i'm restoreing this truck myself i have to learn bodywork since i can't afford to pay somebody else Attached Images

03-15-2003, 09:05 PM	#3
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	Randys method will work fine if there is enough metal left. Looks like some of those pits go all the way thru the metal. If you sandblast it till all the rust is gone you may find something that resembles swiss cheeze. I would cut it out and make a patch panel to weld in. __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

03-15-2003, 09:54 PM	#5
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	no the pits don't go all the way through there not even rust pits just clean pits,actually it looks like somebody might of blasted a little to close to the panel and caused the pitting if it is pitting i don't know just guessing ,i'm going to sand on the other side tommrrow and see if it's the same way,and i'll let you know. the little holes you see looks like someone might have pulled a little dent out at sometime,the truck body is very solid i haven't found a drop of body filler in it no where,i bought it from jacquesdean from the 60-66 parts board i think he just started sanding in that area and stopped,so i decided to fix it first,before it got out of hand , __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

03-16-2003, 02:31 AM	#7
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	I'd go with what's called high build, or high mill primer. It is a poly primer that goes on thick, 3 coats = thickness of a penny. Then block sand it. Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

03-16-2003, 10:18 AM	#8
72K10 Registered User Join Date: Dec 1999 Location: New York Posts: 288	I agree with ccsrcr; pitting is usually filled with automotive glazing putty. That's exactly what it's for. Sand it to bare metal, primer it, then putty. Primering and sanding over and over again would do it, but if you were using regular primer, it would take probably 25 coats or more. Don't know about the high build primer, but sounds like it would work as well. __________________ RLTW 70C10 72K10 72K10 Cheyenne 72C10 Cheyenne Super

03-15-2003, 08:55 PM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Sandblast it clean, then prime and sand, prime and sand......keep priming and sanding until the pits are gone.

03-15-2003, 09:53 PM	#4
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Yeah, forgot to mention that if you get carried away with sandblasting, the entire truck could disappear.

03-15-2003, 11:21 PM	#6
ccsrcr Registered User Join Date: Jan 2003 Location: Lorton,VA Posts: 201	You can use spot putty to fill in the pits, then sand the spot putty , and primer the area.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.