|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-30-2009, 04:03 PM
|
#1 |
|
Registered User
Join Date: Oct 2005
Location: Ontario, Canada
Posts: 145
|
6 Cyl power brake question
I want to put a booster in my 1970 6 cylinder truck. But there is not room for my new booster and master cylinder beside the stock air cleaner.
I have seen the offset air filters on 6 cylinder trucks that came from the factory with PB. But hard to find one of those. How did you resolve this? Can you post a pic of your intallation? Its possible to buy a angle bracket to solve this problem on early Ford Broncos. The bracket goes on the firewall, and angles the booster/cylinder toward the fender. Is there such a solution for our trucks? thanks Mark |
|
|
|
03-30-2009, 04:55 PM
|
#2 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: 6 Cyl power brake question
I have a 10 in aftermarket air cleaner on mine.I also used the 7 in booster.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
03-30-2009, 04:58 PM
|
#3 |
|
Active Member
 
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: 6 Cyl power brake question
I went to auto zone and got these parts. Actually, I had the smaller one for single throat carbs. Then I decided I didn't like the power brakes I had and I took the booster off. I just had too much braking power for my light truck and the manual brakes work good on this one.
|
|
|
|
|
03-30-2009, 05:01 PM
|
#4 |
|
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: 6 Cyl power brake question
You could go to your LAPS and buy a custom air cleaner in a smaller diameter to fit the 1bbl carb or you could upgrade to a 4bbl carb/intake and buy a 4bbl air cleaner. Of course you could always find someone on here selling an original offset air cleaner made for just this situation but it won't be cheap!
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
|
|
|
|
03-30-2009, 05:22 PM
|
#5 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: 6 Cyl power brake question
I hope these pics showed.Ignore the crappy air filter top.and the dirty engine.I have had so much crappy weather and health stuff I haven't touched the truck in about 4-5 months.
Anyway here is how mine fits.The smaller Booster really gives it more room than you would think.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
03-30-2009, 05:29 PM
|
#6 | |
|
Active Member
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: 6 Cyl power brake question
Quote:
 I had trouble with mine also. If you do a preview before submitting you can see if they came out or not.
|
|
|
|
|
|
03-30-2009, 05:34 PM
|
#7 |
|
Its a Truck Thing......
Join Date: Dec 2004
Location: Sierra Vista, Arizona
Posts: 3,159
|
Re: 6 Cyl power brake question
Nice Stepper........
Smitty
__________________
71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 71 C20 Longhorn/Ole Yellor 69 C30 Former Motor Home, Flat Bed time |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
