what heads to run on 327 short crank - The 1947 - Present Chevrolet & GMC Truck Message Board Network

heavy71chevy · 03-31-2009, 10:22 AM

The motor im rebuilding for my 71 is a 1964 327 and it has camelhump heads with no accesory holes..rather then spend my money on hardend valve seats and messing with the brackets what heads would be good for the street on my 327? im planning on running a comp cams magnum 292 bumpstick with all stock internals...any insite would help guys..thanks

stllookn · 03-31-2009, 10:43 AM

GM Vortec heads. If you can find them used they are a very good deal. You will need a Vortec intake as well. Price out all the parts before taking the leap. What are the casting numbers on your existing heads?

**special-K** · 03-31-2009, 10:52 AM

If you are getting cast iron used heads just make sure they are 64cc.

monte0185 · 03-31-2009, 11:42 AM

Honestly for the money nowadays by the time you spent the money on a set of heads then have them worked with bigger valves and seats and studs and guide plates its cheaper to buy a set of aftermarket aluminum ones. Jegs has some pretty good deals on their brand as well as lots of other compaines. Patriot performance seems to be selling pretty well and are pretty cheap. I dont know the quality as ive never had a set or know anyone who does but the reviews are pretty good. Hope this helps.

heavy71chevy · 03-31-2009, 02:09 PM

would 350 heads work on my 327?

smoky02 · 03-31-2009, 03:22 PM

Yes 350 heads will work, and I would think that the vortec heads would be a bad way to go as they aren't a high RPM turning head. But that is just my opinion and what I have gathered.

03-31-2009, 10:22 AM	#1
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	what heads to run on 327 short crank The motor im rebuilding for my 71 is a 1964 327 and it has camelhump heads with no accesory holes..rather then spend my money on hardend valve seats and messing with the brackets what heads would be good for the street on my 327? im planning on running a comp cams magnum 292 bumpstick with all stock internals...any insite would help guys..thanks __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster

03-31-2009, 10:43 AM	#2
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: what heads to run on 327 short crank GM Vortec heads. If you can find them used they are a very good deal. You will need a Vortec intake as well. Price out all the parts before taking the leap. What are the casting numbers on your existing heads? __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 03-31-2009 at 10:43 AM.

03-31-2009, 10:52 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: what heads to run on 327 short crank If you are getting cast iron used heads just make sure they are 64cc. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-31-2009, 11:42 AM	#4
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Re: what heads to run on 327 short crank Honestly for the money nowadays by the time you spent the money on a set of heads then have them worked with bigger valves and seats and studs and guide plates its cheaper to buy a set of aftermarket aluminum ones. Jegs has some pretty good deals on their brand as well as lots of other compaines. Patriot performance seems to be selling pretty well and are pretty cheap. I dont know the quality as ive never had a set or know anyone who does but the reviews are pretty good. Hope this helps. __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together.

03-31-2009, 02:09 PM	#5
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Re: what heads to run on 327 short crank would 350 heads work on my 327? __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster

03-31-2009, 03:22 PM	#6
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: what heads to run on 327 short crank Yes 350 heads will work, and I would think that the vortec heads would be a bad way to go as they aren't a high RPM turning head. But that is just my opinion and what I have gathered. __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.