Anyone near Northern MO wanna race? ~~info~~ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy2racr · 03-10-2003, 11:07 PM

This is a Very fun litte track to hit win or loose fun to do atleast once
You can PM me with questions, and if you're gonna go let me know as well
Bryce

THUNDER VALLEY
STREET CAR SHOOTOUT

HEADS UP PRO TREE

Eighth mile Single eliminations

Three Classes
TRUE STREET
EXTREME 10.5
OUTLAW STREET

Two qualification attempts
Quickest Eight in each Class
Race for the MONEY

Thunder Valley Raceway
East of I 35 1.5 miles on U.S. 136
Bethany Mo.

For more info 1641 417 0356
Track number 1660 425 7500
www.americanmusclecarsofiowa.com

Saturday, May 10 Saturday, June 14, Saturday July 12, Saturday, Aug. 9, and Saturday Sept. 13
Entries must be there by 5:00 P.M. Qualification runs at 6:00 and 7:00 P.M.

All cars must pass track safety requirements
Helments, Belts, Roll Bars, ETC.

TRUE STREET

Min weight with driver 3100lbs.
Full body street cars only
All factory windows, door panels, dash, etc.
Working headlights and taillights
Factory frames only
No ladder bar or 4 link suspensions
Slapper bars/SSM Type lift bars accepted
No slicks
DOT tires 28x10, measured at tread max.
Must run through mufflers

ENGINE SPECS

Must have steel cylinder heads
Standard port location only
Hryd. or solid cams NO rollers
One 4 barrel carb only or factory fuel injection
NO blower or nitrous!!!!!!!
Max cubic inches 480

EXTREME 10.5

Full bodied street legal doorslammers ONLY
Slicks 10.5W allowed max
Up to 12.5 wide DOT tire MAX
Any suspension allowed
Open headers allowed
Carb One 4 barrel only
Blowers and Nitrous ALLOWED
Max cubic inch 520
Min weight with driver 2800lbs.

OUTLAW STREET

Street legal cars only
Any engine combination allowed
Any suspension allowed
Open headers allowed
Slicks or DOT tires allowed
Nitrous, Blowers, Etc Allowed
Min weight with driver 2800lbs.

gchemist · 03-11-2003, 01:03 AM

If I lived closer I would be there!!!

84Stepper · 03-11-2003, 05:47 PM

I think I might go to that. I usually go to the races down there and they are fun. I have never ran my truck tho. I really don't wanna run it till I get some gears.

LOHRTBT · 03-11-2003, 05:48 PM

Stepper....This is not the Thunder Valley in Noble.

chevy2racr · 03-11-2003, 10:51 PM

I was gonna say, "down there" from OK to MO is up

84Stepper · 03-12-2003, 12:03 AM

ooops........my bad I feel like an idiot.

chevy2racr · 03-13-2003, 03:34 PM

eh, its all good man, just checking how well you read stuff

TTT

chevy2racr · 03-16-2003, 11:18 PM

ttt

03-10-2003, 11:07 PM	#1
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	Anyone near Northern MO wanna race? ~~info~~ This is a Very fun litte track to hit win or loose fun to do atleast once You can PM me with questions, and if you're gonna go let me know as well Bryce THUNDER VALLEY STREET CAR SHOOTOUT HEADS UP PRO TREE Eighth mile Single eliminations Three Classes TRUE STREET EXTREME 10.5 OUTLAW STREET Two qualification attempts Quickest Eight in each Class Race for the MONEY Thunder Valley Raceway East of I 35 1.5 miles on U.S. 136 Bethany Mo. For more info 1641 417 0356 Track number 1660 425 7500 www.americanmusclecarsofiowa.com Saturday, May 10 Saturday, June 14, Saturday July 12, Saturday, Aug. 9, and Saturday Sept. 13 Entries must be there by 5:00 P.M. Qualification runs at 6:00 and 7:00 P.M. All cars must pass track safety requirements Helments, Belts, Roll Bars, ETC. TRUE STREET Min weight with driver 3100lbs. Full body street cars only All factory windows, door panels, dash, etc. Working headlights and taillights Factory frames only No ladder bar or 4 link suspensions Slapper bars/SSM Type lift bars accepted No slicks DOT tires 28x10, measured at tread max. Must run through mufflers ENGINE SPECS Must have steel cylinder heads Standard port location only Hryd. or solid cams NO rollers One 4 barrel carb only or factory fuel injection NO blower or nitrous!!!!!!! Max cubic inches 480 EXTREME 10.5 Full bodied street legal doorslammers ONLY Slicks 10.5W allowed max Up to 12.5 wide DOT tire MAX Any suspension allowed Open headers allowed Carb One 4 barrel only Blowers and Nitrous ALLOWED Max cubic inch 520 Min weight with driver 2800lbs. OUTLAW STREET Street legal cars only Any engine combination allowed Any suspension allowed Open headers allowed Slicks or DOT tires allowed Nitrous, Blowers, Etc Allowed Min weight with driver 2800lbs. __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

03-11-2003, 01:03 AM	#2
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	If I lived closer I would be there!!! __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

03-11-2003, 05:47 PM	#3
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	I think I might go to that. I usually go to the races down there and they are fun. I have never ran my truck tho. I really don't wanna run it till I get some gears. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

03-11-2003, 05:48 PM	#4
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Stepper....This is not the Thunder Valley in Noble. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-11-2003, 10:51 PM	#5
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	I was gonna say, "down there" from OK to MO is up __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

03-12-2003, 12:03 AM	#6
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	ooops........my bad I feel like an idiot. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

03-13-2003, 03:34 PM	#7
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	eh, its all good man, just checking how well you read stuff TTT __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

03-16-2003, 11:18 PM	#8
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	ttt __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.