How do I get these.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dan72cst · 03-16-2003, 07:09 PM

Finally got a glove box emblem for my 68 and need the little bushing/clip thingys that go into the holes in the door. The emblem posts slide into them. Where do I get these or does anybody have three of them?

Fred T · 03-16-2003, 07:25 PM

A good, full service hardware store should have them.

Dan72cst · 03-16-2003, 07:28 PM

Thanks Fred....What are they called???

BUXMAN66 · 03-16-2003, 10:12 PM

should be just the self -tapping sheet metal nuts.just went to ace hdwre. sat. to get me some for my new grille mouldings.

Dan72cst · 03-16-2003, 11:20 PM

Its not a nut!!!! the golve box door has "blind" holes. Can't access from the back. They push into the hole from the front and then the emblem pushes into them from the front as well. Anybody sell these things or have some on one of their spare doors? Thanks Dan

pickupman · 03-16-2003, 11:46 PM

Barrell bolts or barrel clips

rigo · 03-16-2003, 11:49 PM

you could always use a dab of clear silicone on the back of the emblem posts....tape the emblem on till the silicone dries...and wahlah!...instant adhesion with no rattles.

rigo

toms68cst · 03-17-2003, 12:18 AM

I had a hard time getting those clippy things to hold. I used DS tape and It has held so far.

**Classic Heartbeat** · 03-17-2003, 01:10 AM

silicone should only be used on your engine gasket surfaces.. Use it on the paintable surfaces of your truck and you will get silicone invasion in the metal. This will cause your paint to fish eye when being applied. Bad news!! WES www.ClassicHeartbeat.com

stomper · 03-17-2003, 03:08 AM

Yea, but you're a nut! LOL I got those on the 283 emblems on my '62. Try Wesco Autobody. they have lots of that stuff to put trim on from one side.

03-16-2003, 07:09 PM	#1
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	How do I get these.... Finally got a glove box emblem for my 68 and need the little bushing/clip thingys that go into the holes in the door. The emblem posts slide into them. Where do I get these or does anybody have three of them? __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

03-16-2003, 07:25 PM	#2
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	A good, full service hardware store should have them. __________________ Fred There is no such thing as too much cam...just not enough engine.

03-16-2003, 07:28 PM	#3
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	Thanks Fred....What are they called??? __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

03-16-2003, 10:12 PM	#4
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	should be just the self -tapping sheet metal nuts.just went to ace hdwre. sat. to get me some for my new grille mouldings. __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?

03-16-2003, 11:20 PM	#5
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	Its not a nut!!!! the golve box door has "blind" holes. Can't access from the back. They push into the hole from the front and then the emblem pushes into them from the front as well. Anybody sell these things or have some on one of their spare doors? Thanks Dan __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

03-16-2003, 11:46 PM	#6
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Barrell bolts or barrel clips __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-16-2003, 11:49 PM	#7
rigo Flake Daddy Join Date: Jan 2003 Location: Plainview TEXAS Posts: 456	you could always use a dab of clear silicone on the back of the emblem posts....tape the emblem on till the silicone dries...and wahlah!...instant adhesion with no rattles. rigo __________________ 1968 SWB Fleet Daily Driver 350/TH400 shaved driprail,emblems,tailgate,air ride suspension 1964 Pontiac Catalina 2dr. hardtop shaved everything, air ride suspension 1998 Range Rover 1960 El Camino....in the works.....

03-17-2003, 12:18 AM	#8
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,282	I had a hard time getting those clippy things to hold. I used DS tape and It has held so far. __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

03-17-2003, 01:10 AM	#9
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	silicone should only be used on your engine gasket surfaces.. Use it on the paintable surfaces of your truck and you will get silicone invasion in the metal. This will cause your paint to fish eye when being applied. Bad news!! WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

03-17-2003, 03:08 AM	#10
stomper Junior Member Join Date: Jul 2002 Location: Scottsdale, AZ Posts: 1,701	Yea, but you're a nut! LOL I got those on the 283 emblems on my '62. Try Wesco Autobody. they have lots of that stuff to put trim on from one side. __________________ "I was patina when patina wasn't cool." 1973 Cheyenne SWB Sunset Gold / Frost White / Saddle



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.