DIY4X Conversion Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

theoneandonly · 04-01-2009, 05:35 PM

Well project went south upon my return from Iraq so my loss is going to be someone gain. I have a FGB52 kit (complete un opened hardware), a tube engine crossmember (complete un opened hardware), and a shackle flip and switch with 4.4in shackles (complete un opened hardware) for the 67-72 year model trucks. I also have weld on perches for a 12bolt axle and ez inch blocks all from DIY4X. Grendel has used these same kits on his project. All these kits together would be $748 without shipping. I'm would like to get $400 for all but I will take any resonable offer. I wouldnt know where to begin to ship due to the weight of these items but I am located in Fayetteville NC and I will meet up to 150 miles for the cost of gas. Give me a call at 912-980-1808 if your interested.

**jaros44sr** · 04-01-2009, 06:35 PM

I just bought the crossmember, but might be interested in the shackle flip kit, depending on price...lmk if you want to break up the package
Also the inch blocks
Thank You for serving the U.S.of A.

BLAZERMAN · 04-01-2009, 06:49 PM

I would be interested in the FGB52 kit if you decide to separate.

theoneandonly · 04-01-2009, 07:34 PM

I will seperate seeing people are not interested in the whole package. Where are you guys at? I'll take $150 for the FGB52 (blazerman has dibs), and I'll take $100 for the flip kit (jaros44sr 1st dibs, highrpm 2nd dibs).

theoneandonly · 04-01-2009, 07:40 PM

Also I'll take 20 for the inch blocks (jaros44sr 1st dibs, highrpm 2nd dibs), 20 forthe perches, and 125 for the cross member (JMAC has dibs).

**jaros44sr** · 04-01-2009, 07:51 PM

Let me call Kurt at DIY4X and make sure the will fit a '72. Do you have a part number? I might be interested in the inch blocks as well

theoneandonly · 04-01-2009, 07:53 PM

20 for the ez inch and then shipping. I'll have to get addresses and weight to figure out who has the cheapest shipping unless your close to Ft Bragg NC.

JMac11 · 04-01-2009, 07:55 PM

Dibs on the cross member, Payapl as soon as you give me the addy.

theoneandonly · 04-01-2009, 07:58 PM

jmac the cross member is yours but I need your address so I can figure shipping unless your in the fayetteville nc area.

highrpm · 04-01-2009, 08:25 PM

I will take the flip kit and the EZ inch if no one is ahead of me.

**72 Super** · 04-01-2009, 08:25 PM

Thank you for your services. Sorry to hear the situation with your project, goodluck with the sale of your parts. Great prices!

Ray

theoneandonly · 04-01-2009, 08:32 PM

Jaros44sr asked about the shackle flip and blocks first but if he passes highrpm has dibs on flip kit and blocks.

**jaros44sr** · 04-02-2009, 07:11 AM

Quote:

Originally Posted by theoneandonly

Jaros44sr asked about the shackle flip and blocks first but if he passes highrpm has dibs on flip kit and blocks.

Any word on the part number, DIY4X has 2 listed, just want to make sure it will fit a '72

theoneandonly · 04-02-2009, 11:54 AM

00590ka its forthe 69-72 year model trucks. Check out DIY4X.com Do you want the kit?

**jaros44sr** · 04-02-2009, 12:01 PM

Quote:

Originally Posted by theoneandonly

00590ka its forthe 69-72 year model trucks. Check out DIY4X.com Do you want the kit?

Yes, just wanted to make sure it was the right one...shipping to 19454?

shakedown96 · 04-02-2009, 12:21 PM

Thank you SSG. I was in from 00 to 04 82nd Abn 307FSB. 8 months all expenses payed vacation OEFIII.

from a VET to a VET Thank you.

earl87gta · 04-04-2009, 03:52 AM

Ill get in line for the shackl flip

**jaros44sr** · 04-04-2009, 08:23 AM

Quote:

Originally Posted by jaros44sr

Yes, just wanted to make sure it was the right one...shipping to 19454?

OK, I'll paypal ya

**jaros44sr** · 04-04-2009, 10:17 AM

Quote:

Originally Posted by jaros44sr

OK, I'll paypal ya

paypal sent, thank you

LUV2XCLR8 · 04-04-2009, 10:47 AM

Coming to the Newport show?

Interested in Crossmember kit
if it get this far down the list.

Jtrux · 04-04-2009, 04:01 PM

In line for shackle flip if everything falls through.

theoneandonly · 04-07-2009, 10:12 PM

I still have the EZ inch blocks and the perches $20 plus shipping everything else is Sold. Thanks.

04-01-2009, 05:35 PM	#1
theoneandonly Registered User Join Date: Nov 2007 Location: Fayetteville NC Posts: 102	DIY4X Conversion Parts Well project went south upon my return from Iraq so my loss is going to be someone gain. I have a FGB52 kit (complete un opened hardware), a tube engine crossmember (complete un opened hardware), and a shackle flip and switch with 4.4in shackles (complete un opened hardware) for the 67-72 year model trucks. I also have weld on perches for a 12bolt axle and ez inch blocks all from DIY4X. Grendel has used these same kits on his project. All these kits together would be $748 without shipping. I'm would like to get $400 for all but I will take any resonable offer. I wouldnt know where to begin to ship due to the weight of these items but I am located in Fayetteville NC and I will meet up to 150 miles for the cost of gas. Give me a call at 912-980-1808 if your interested. Attached Images __________________ SSG Jeffery Ahlheim 586th Network Support Company, 525th BfSB US Army, FT Bragg, NC 2009 Chevy Silverado LT ext cab 5.3L If you don't stand behind our troops, please feel free to stand in front of them.

04-01-2009, 06:35 PM	#2
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,518	Re: DIY4X Conversion Parts I just bought the crossmember, but might be interested in the shackle flip kit, depending on price...lmk if you want to break up the package Also the inch blocks Thank You for serving the U.S.of A. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 04-01-2009 at 06:38 PM.

04-01-2009, 06:49 PM	#3
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: DIY4X Conversion Parts I would be interested in the FGB52 kit if you decide to separate. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C Last edited by BLAZERMAN; 04-01-2009 at 06:50 PM.

04-01-2009, 07:34 PM	#4
theoneandonly Registered User Join Date: Nov 2007 Location: Fayetteville NC Posts: 102	Re: DIY4X Conversion Parts I will seperate seeing people are not interested in the whole package. Where are you guys at? I'll take $150 for the FGB52 (blazerman has dibs), and I'll take $100 for the flip kit (jaros44sr 1st dibs, highrpm 2nd dibs). __________________ SSG Jeffery Ahlheim 586th Network Support Company, 525th BfSB US Army, FT Bragg, NC 2009 Chevy Silverado LT ext cab 5.3L If you don't stand behind our troops, please feel free to stand in front of them. Last edited by theoneandonly; 04-01-2009 at 09:22 PM. Reason: possible sale

04-01-2009, 07:40 PM	#5
theoneandonly Registered User Join Date: Nov 2007 Location: Fayetteville NC Posts: 102	Re: DIY4X Conversion Parts Also I'll take 20 for the inch blocks (jaros44sr 1st dibs, highrpm 2nd dibs), 20 forthe perches, and 125 for the cross member (JMAC has dibs). __________________ SSG Jeffery Ahlheim 586th Network Support Company, 525th BfSB US Army, FT Bragg, NC 2009 Chevy Silverado LT ext cab 5.3L If you don't stand behind our troops, please feel free to stand in front of them. Last edited by theoneandonly; 04-01-2009 at 08:34 PM. Reason: possible sale

04-01-2009, 07:51 PM	#6
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,518	Re: DIY4X Conversion Parts Let me call Kurt at DIY4X and make sure the will fit a '72. Do you have a part number? I might be interested in the inch blocks as well __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 04-01-2009 at 07:54 PM.

04-01-2009, 07:53 PM	#7
theoneandonly Registered User Join Date: Nov 2007 Location: Fayetteville NC Posts: 102	Re: DIY4X Conversion Parts 20 for the ez inch and then shipping. I'll have to get addresses and weight to figure out who has the cheapest shipping unless your close to Ft Bragg NC. __________________ SSG Jeffery Ahlheim 586th Network Support Company, 525th BfSB US Army, FT Bragg, NC 2009 Chevy Silverado LT ext cab 5.3L If you don't stand behind our troops, please feel free to stand in front of them.

04-01-2009, 07:55 PM	#8
JMac11 Registered User Join Date: May 2005 Location: Tallahassee Fl Posts: 773	Re: DIY4X Conversion Parts Dibs on the cross member, Payapl as soon as you give me the addy.

04-01-2009, 07:58 PM	#9
theoneandonly Registered User Join Date: Nov 2007 Location: Fayetteville NC Posts: 102	Re: DIY4X Conversion Parts jmac the cross member is yours but I need your address so I can figure shipping unless your in the fayetteville nc area. __________________ SSG Jeffery Ahlheim 586th Network Support Company, 525th BfSB US Army, FT Bragg, NC 2009 Chevy Silverado LT ext cab 5.3L If you don't stand behind our troops, please feel free to stand in front of them.

04-01-2009, 08:25 PM	#10
highrpm Registered User Join Date: Dec 2004 Location: Davidson, NC Posts: 269	Re: DIY4X Conversion Parts I will take the flip kit and the EZ inch if no one is ahead of me.

04-01-2009, 08:25 PM	#11
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,690	Re: DIY4X Conversion Parts Thank you for your services. Sorry to hear the situation with your project, goodluck with the sale of your parts. Great prices! Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

04-01-2009, 08:32 PM	#12
theoneandonly Registered User Join Date: Nov 2007 Location: Fayetteville NC Posts: 102	Re: DIY4X Conversion Parts Jaros44sr asked about the shackle flip and blocks first but if he passes highrpm has dibs on flip kit and blocks. __________________ SSG Jeffery Ahlheim 586th Network Support Company, 525th BfSB US Army, FT Bragg, NC 2009 Chevy Silverado LT ext cab 5.3L If you don't stand behind our troops, please feel free to stand in front of them.

04-02-2009, 11:54 AM	#14
theoneandonly Registered User Join Date: Nov 2007 Location: Fayetteville NC Posts: 102	Re: DIY4X Conversion Parts 00590ka its forthe 69-72 year model trucks. Check out DIY4X.com Do you want the kit? __________________ SSG Jeffery Ahlheim 586th Network Support Company, 525th BfSB US Army, FT Bragg, NC 2009 Chevy Silverado LT ext cab 5.3L If you don't stand behind our troops, please feel free to stand in front of them.

04-02-2009, 12:21 PM	#16
shakedown96 Registered User Join Date: Jan 2009 Location: gilboa ny Posts: 91	Re: DIY4X Conversion Parts Thank you SSG. I was in from 00 to 04 82nd Abn 307FSB. 8 months all expenses payed vacation OEFIII. from a VET to a VET Thank you.

04-04-2009, 03:52 AM	#17
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: DIY4X Conversion Parts Ill get in line for the shackl flip __________________ Earl 68 2500 4x4 GMC Burb



Register or Log In To remove these advertisements.

04-04-2009, 10:47 AM	#20
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,477	Re: DIY4X Conversion Parts Coming to the Newport show? Interested in Crossmember kit if it get this far down the list. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

04-04-2009, 04:01 PM	#21
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: DIY4X Conversion Parts In line for shackle flip if everything falls through. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

04-07-2009, 10:12 PM	#22
theoneandonly Registered User Join Date: Nov 2007 Location: Fayetteville NC Posts: 102	Re: DIY4X Conversion Parts I still have the EZ inch blocks and the perches $20 plus shipping everything else is Sold. Thanks. __________________ SSG Jeffery Ahlheim 586th Network Support Company, 525th BfSB US Army, FT Bragg, NC 2009 Chevy Silverado LT ext cab 5.3L If you don't stand behind our troops, please feel free to stand in front of them.

Register or Log In To remove these advertisements.