WTB....67-72 Printed Circuit for a Tach Dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cyclone44 · 04-04-2009, 10:16 PM

I need a Printed Circuit for a Tach Dash....Price with shipping to 37918 please.....

PT'S 70 CST · 04-04-2009, 10:35 PM

Good luck George finding a good factory one. You can get a after market one for around 55 + shipping.

PT

**special-K** · 04-05-2009, 08:10 AM

What would a N.O.S. tach circuit go for these days?

stope4 · 04-05-2009, 12:58 PM

Anything wrong with the aftermarket ones?

byrd · 04-05-2009, 01:03 PM

No they are and exact replica

PT'S 70 CST · 04-05-2009, 02:59 PM

Hey Randy the one repop that I bought from The car and truck shop was green in color and did not seem to be as thick as the oe ones. Do you have another place to get them or are they the same as the repops that I have bought. Tim as far as the NOS ones goes I saw one on ebay awhile back go for 80.00.

PT

byrd · 04-05-2009, 04:53 PM

Tim,
Jordan (Brothers trucks) has the best looking most accurate repop. It is so close to factory and even has the correct GM part # made on it.

Cyclone44 · 04-06-2009, 07:11 AM

Quote:

Originally Posted by byrd

No they are and exact replica

Brothers has them for $59.00 and LMC has them for $39.00.....Are these different?

byrd · 04-06-2009, 09:18 AM

Quote:

Originally Posted by Cyclone44

Brothers has them for $59.00 and LMC has them for $39.00.....Are these different?

Yes, and no. They will both serve the same purpose, but the

Brothers one is blue like the factory one, has a tougher, thicker more rigid laminating, and also has the correct fit and finish as factory. I have had NOS printed circuits and there is NO DIFFERENCE between a NOS and a Brothers repop.

LMC is green, not blue. The LMC one is quite flimsy, and the laminating is a little thinner.
I am not sure which one will last longer or which one is more durable, but I must say I much prefer the Bothers one over the LMC one,

BTW the LMC one is made by Counterpart, in Taiwan/China
The Brothers one is Made here is the USA.

byrd · 04-06-2009, 09:20 AM

Quote:

Originally Posted by PT'S 70 CST

Hey Randy the one repop that I bought from The car and truck shop was green in color and did not seem to be as thick as the oe ones. Do you have another place to get them or are they the same as the repops that I have bought. Tim as far as the NOS ones goes I saw one on ebay awhile back go for 80.00.

PT

Bothers again, I cannot stress how much nicer they are..

PM sent

Cyclone44 · 04-06-2009, 02:51 PM

PM sent Randy.......

Cyclone44 · 04-06-2009, 09:42 PM

Ttt

cleszkie · 04-07-2009, 03:43 PM

Cyclone44 -

I have a brand new repop printed circuit for a tach dash that I bought from the Orange County Truck Shop in California. It came with the tach and vacuum gauge kit I bought, but I already had a good printed curcuit to use in my gauge cluster. The printed curcuit is identical to the NOS, green in color with copper circuits. It is still in the sealed plastic covering that it came in. I will sell it for $30 including shipping. PM me if you are interested. Send me an e-mail addy if you want pics.

Cyclone44 · 04-07-2009, 10:23 PM

Quote:

Originally Posted by cleszkie

Cyclone44 -

I have a brand new repop printed circuit for a tach dash that I bought from the Orange County Truck Shop in California. It came with the tach and vacuum gauge kit I bought, but I already had a good printed curcuit to use in my gauge cluster. The printed curcuit is identical to the NOS, green in color with copper circuits. It is still in the sealed plastic covering that it came in. I will sell it for $30 including shipping. PM me if you are interested. Send me an e-mail addy if you want pics.

PM semt....

04-04-2009, 10:16 PM	#1
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	WTB....67-72 Printed Circuit for a Tach Dash I need a Printed Circuit for a Tach Dash....Price with shipping to 37918 please.....

04-04-2009, 10:35 PM	#2
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: WTB....67-72 Printed Circuit for a Tach Dash Good luck George finding a good factory one. You can get a after market one for around 55 + shipping. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

04-05-2009, 08:10 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: WTB....67-72 Printed Circuit for a Tach Dash What would a N.O.S. tach circuit go for these days? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-05-2009, 12:58 PM	#4
stope4 Registered User Join Date: Jan 2006 Location: Houston Posts: 434	Re: WTB....67-72 Printed Circuit for a Tach Dash Anything wrong with the aftermarket ones?

04-05-2009, 02:59 PM	#6
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: WTB....67-72 Printed Circuit for a Tach Dash Hey Randy the one repop that I bought from The car and truck shop was green in color and did not seem to be as thick as the oe ones. Do you have another place to get them or are they the same as the repops that I have bought. Tim as far as the NOS ones goes I saw one on ebay awhile back go for 80.00. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

04-06-2009, 02:51 PM	#11
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: WTB....67-72 Printed Circuit for a Tach Dash PM sent Randy.......

04-06-2009, 09:42 PM	#12
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: WTB....67-72 Printed Circuit for a Tach Dash Ttt

04-07-2009, 03:43 PM	#13
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: WTB....67-72 Printed Circuit for a Tach Dash Cyclone44 - I have a brand new repop printed circuit for a tach dash that I bought from the Orange County Truck Shop in California. It came with the tach and vacuum gauge kit I bought, but I already had a good printed curcuit to use in my gauge cluster. The printed curcuit is identical to the NOS, green in color with copper circuits. It is still in the sealed plastic covering that it came in. I will sell it for $30 including shipping. PM me if you are interested. Send me an e-mail addy if you want pics.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.