how much should it cost me to ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rogue_Sentinel · 04-10-2009, 10:59 AM

how much should it cost me to get my transmission rebuild ? if i get some one to do it for me . so far one told me $500 (a-1 transmission) and some one else told me $700.

boatpuller · 04-10-2009, 11:23 AM

my th350 was about 800.00.but,i had him take it out and rebuild it.then reinstall it.at the time iwas out of action from my first back surgery.

85Bowtie · 04-10-2009, 11:26 AM

Since I'm in the dark on rebuilding an automatic, I had a friend of mine who's a master ASE certified mechanic tell me $200 to rebuild a 350 Turbo.

As far as $700 goes, you could buy a TCI for that and it would perform better plus TCI charges either $100 or $200 anytime the tranny needs rebuilding.

$500, with a warranty, sounds fair if that also inlcudes removal and installation

You should try getting a quote for a 727.... $1400

**N2TRUX** · 04-10-2009, 01:06 PM

What transmission? There is a big difference in price depending on the model.

OrangeAnimal · 04-10-2009, 01:12 PM

I have paid between 500-700 for most older automatics. If you pull it yourself you can get closer to 400. It doesn't take long for them to pull it. They have the lift and the tools to do the job quick. When I did it for a living I could pull a trans in a RWD truck or car in about 30 mins. Now that I am working on the ground and don't have a fancy jack it takes me about an hour+time to drain the tranny. All that said if you pay more than 700 total I think you are getting screwed unless you are getting a high stall torque convertor or a new valve body.

Rogue_Sentinel · 04-10-2009, 02:46 PM

Quote:

Originally Posted by N2TRUX

What transmission? There is a big difference in price depending on the model.

350 5.7 79 scottsdale

85Bowtie · 04-10-2009, 02:51 PM

Your going to spend at the minum with shipping and etc $700 for a decent transmission. If you can't rebuild it yourself or have a buddy do it then $500 sounds pretty darn good if they give you a warranty and include removal and installation for that price.

**78 Big10 454** · 04-10-2009, 08:06 PM

Last year, I had my Turbo 400 rebuilt at one of the top tranny shops in L.A. Complete service, including R & R of the trans, was $700 out the door.

**old Rusty C10** · 04-10-2009, 08:28 PM

a th 350-400 i can get done for $525 installed they pull it build it and swap it a 700R4 is about 750 same deal

*78 Chevyrado* · 04-10-2009, 10:13 PM

Around here, a th350 or th400 costs around $600-$800 and a th700r4 costs $1200, all 3 including removal and installation.

gchemist · 04-10-2009, 10:50 PM

$1700 plus for a custom 700R4 like mine. OUCH!! Worth every penny with smiles!!

Rogue_Sentinel · 04-11-2009, 01:38 AM

http://www.compperformancegroupstore...ct_Code=329000

i like to rebuild it whit the tci kit. thanks for all the info guys

04-10-2009, 10:59 AM	#1
Rogue_Sentinel Registered User Join Date: Mar 2009 Location: nc, mount airy Posts: 376	how much should it cost me to ? how much should it cost me to get my transmission rebuild ? if i get some one to do it for me . so far one told me $500 (a-1 transmission) and some one else told me $700. __________________ "Myths and legends die hard in America. We love them for the extra dimension they provide, the illusion of near-infinite possibility to erase the narrow confines of most men's reality. Weird heroes and mould-breaking champions exist as living proof to those who need it that the tyranny of 'the rat race' is not yet final." Hunter S THompson

04-10-2009, 11:23 AM	#2
boatpuller Registered User Join Date: Sep 2005 Location: Sun City West, Az Posts: 3,822	Re: how much should it cost me to ? my th350 was about 800.00.but,i had him take it out and rebuild it.then reinstall it.at the time iwas out of action from my first back surgery. __________________ " Never look up a dead dogs butt."

04-10-2009, 11:26 AM	#3
85Bowtie Registered User Join Date: Mar 2009 Location: TN Posts: 410	Re: how much should it cost me to ? Since I'm in the dark on rebuilding an automatic, I had a friend of mine who's a master ASE certified mechanic tell me $200 to rebuild a 350 Turbo. As far as $700 goes, you could buy a TCI for that and it would perform better plus TCI charges either $100 or $200 anytime the tranny needs rebuilding. $500, with a warranty, sounds fair if that also inlcudes removal and installation You should try getting a quote for a 727.... $1400 __________________ '69 Dodge Charger R/T 440, 727, 3.55 Sure Grip '68 Plymouth Road Runner 383, 727, 3.23 Sure Grip '89 Dodge Diplomat ex cop car 408, 727, 3.55 Sure Grip '77 Dodge Monaco ex cop car 440, 727, 2.71 '79 Dodge 'Lil Red Express pickup 360, 727, 3.55 Sure Grip '12 Dodge Challenger SRT8 392, M6, 3.92 '85 Chevrolet C-10 SWB 2wd 305, TH350, 2.73 Last edited by 85Bowtie; 04-10-2009 at 11:31 AM.

04-10-2009, 01:06 PM	#4
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: how much should it cost me to ? What transmission? There is a big difference in price depending on the model. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

04-10-2009, 01:12 PM	#5
OrangeAnimal Registered User Join Date: Jan 2009 Location: New Orleans, LA Posts: 702	Re: how much should it cost me to ? I have paid between 500-700 for most older automatics. If you pull it yourself you can get closer to 400. It doesn't take long for them to pull it. They have the lift and the tools to do the job quick. When I did it for a living I could pull a trans in a RWD truck or car in about 30 mins. Now that I am working on the ground and don't have a fancy jack it takes me about an hour+time to drain the tranny. All that said if you pay more than 700 total I think you are getting screwed unless you are getting a high stall torque convertor or a new valve body. __________________ 82 Chevy SWB "OrangeAnimal" Lot of Goodies! Sold 93 GMC 1500 "Angry Red" 383 TBI Powered Fun! 300hp/410ft.lbs. 09 Yaris wife's daily.

04-10-2009, 02:51 PM	#7
85Bowtie Registered User Join Date: Mar 2009 Location: TN Posts: 410	Re: how much should it cost me to ? Your going to spend at the minum with shipping and etc $700 for a decent transmission. If you can't rebuild it yourself or have a buddy do it then $500 sounds pretty darn good if they give you a warranty and include removal and installation for that price. __________________ '69 Dodge Charger R/T 440, 727, 3.55 Sure Grip '68 Plymouth Road Runner 383, 727, 3.23 Sure Grip '89 Dodge Diplomat ex cop car 408, 727, 3.55 Sure Grip '77 Dodge Monaco ex cop car 440, 727, 2.71 '79 Dodge 'Lil Red Express pickup 360, 727, 3.55 Sure Grip '12 Dodge Challenger SRT8 392, M6, 3.92 '85 Chevrolet C-10 SWB 2wd 305, TH350, 2.73 Last edited by 85Bowtie; 04-10-2009 at 02:51 PM.

04-10-2009, 08:06 PM	#8
78 Big10 454 78 Big10 454 Join Date: Jul 2008 Location: Pismo Beach, CA Posts: 838	Re: how much should it cost me to ? Last year, I had my Turbo 400 rebuilt at one of the top tranny shops in L.A. Complete service, including R & R of the trans, was $700 out the door.

04-10-2009, 08:28 PM	#9
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: how much should it cost me to ? a th 350-400 i can get done for $525 installed they pull it build it and swap it a 700R4 is about 750 same deal __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

04-10-2009, 10:13 PM	#10
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: how much should it cost me to ? Around here, a th350 or th400 costs around $600-$800 and a th700r4 costs $1200, all 3 including removal and installation.

04-10-2009, 10:50 PM	#11
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: how much should it cost me to ? $1700 plus for a custom 700R4 like mine. OUCH!! Worth every penny with smiles!! __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

04-11-2009, 01:38 AM	#12
Rogue_Sentinel Registered User Join Date: Mar 2009 Location: nc, mount airy Posts: 376	Re: how much should it cost me to ? http://www.compperformancegroupstore...ct_Code=329000 i like to rebuild it whit the tci kit. thanks for all the info guys __________________ "Myths and legends die hard in America. We love them for the extra dimension they provide, the illusion of near-infinite possibility to erase the narrow confines of most men's reality. Weird heroes and mould-breaking champions exist as living proof to those who need it that the tyranny of 'the rat race' is not yet final." Hunter S THompson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.