cab & chassis - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jill56 · 03-15-2003, 02:08 PM

I have a 58 cab and complete rolling chassis for sale. Make offer.
jhensley1@adelphia.net (bed does not go with it!!!!)

pugs · 03-15-2003, 07:03 PM

how bad is the cab, long or short wb and how much

jill56 · 03-15-2003, 08:49 PM

Short wb (no bed). Cab is very solid, but it has had some metal
put in the floor. What will you give me? I have a winshield &
back glass, I think the winshield is a little fogged up around the
edges. This cab would be excellant for a top chop. I can send you
more pics but I need your email address. Chassis is complete
from front to back.

pugs · 03-15-2003, 11:03 PM

send me a few pics of the floor cab corners and lower door hinge posts scootertrash33@msn.com

john j · 03-17-2003, 04:40 PM

HOW BAD ARE THE KING PINS ON THE FRONT AXEL? YOU SAID YOU WOULD TAKE 50.00 FOR THE AXEL. NO SPRINGS

jill56 · 03-17-2003, 06:54 PM

I haven't checked them, but I can if you are interested. I also
have another front clip that was cut off of my truck. Let me know.

john j · 03-17-2003, 07:33 PM

Yes please check them. I also sent you an e-mail

jill56 · 03-17-2003, 08:09 PM

I will. The axle is 6 lug. Are you sure you don't need the springs
because you can have them with it.

john j · 03-18-2003, 04:59 PM

No i just need the axel. If the pins are good can you deliver it to Danville? A friend up here has a brother in law that lives there. Then he will pick it up Easter weekend. I will be able to overnight him the money. Let me know john j

jill56 · 03-18-2003, 07:01 PM

I think 1 pin is bad it wabbles a little bit, but I think the other one is good. I can easily drive to Danville. I usually go to Danville on fri. nights. Are you still interested?

john j · 03-18-2003, 08:17 PM

Do you believe putting new pins and bushings in will tighten it up?

jill56 · 03-18-2003, 08:45 PM

I think so.

03-15-2003, 02:08 PM	#1
jill56 Registered User Join Date: Feb 2003 Location: Bassett, Va. Posts: 59	cab & chassis I have a 58 cab and complete rolling chassis for sale. Make offer. jhensley1@adelphia.net (bed does not go with it!!!!) Attached Images

03-15-2003, 07:03 PM	#2
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	re how bad is the cab, long or short wb and how much __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

03-15-2003, 08:49 PM	#3
jill56 Registered User Join Date: Feb 2003 Location: Bassett, Va. Posts: 59	Short wb (no bed). Cab is very solid, but it has had some metal put in the floor. What will you give me? I have a winshield & back glass, I think the winshield is a little fogged up around the edges. This cab would be excellant for a top chop. I can send you more pics but I need your email address. Chassis is complete from front to back. __________________ If it ain't broke don't fix it!!! 1956 SWB Small Window Cab 1997 Camaro RS 1972 Chevelle Malibu 1990 S-10 Blazer 4X4 Last edited by jill56; 03-15-2003 at 08:53 PM.

03-15-2003, 11:03 PM	#4
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	re send me a few pics of the floor cab corners and lower door hinge posts scootertrash33@msn.com __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

03-17-2003, 04:40 PM	#5
john j Registered User Join Date: Mar 2003 Location: Newport NH Posts: 216	HOW BAD ARE THE KING PINS ON THE FRONT AXEL? YOU SAID YOU WOULD TAKE 50.00 FOR THE AXEL. NO SPRINGS __________________ you laugh at me cause i'm different ; i laugh at you cause you're the same

03-17-2003, 06:54 PM	#6
jill56 Registered User Join Date: Feb 2003 Location: Bassett, Va. Posts: 59	I haven't checked them, but I can if you are interested. I also have another front clip that was cut off of my truck. Let me know. __________________ If it ain't broke don't fix it!!! 1956 SWB Small Window Cab 1997 Camaro RS 1972 Chevelle Malibu 1990 S-10 Blazer 4X4

03-17-2003, 07:33 PM	#7
john j Registered User Join Date: Mar 2003 Location: Newport NH Posts: 216	Yes please check them. I also sent you an e-mail __________________ you laugh at me cause i'm different ; i laugh at you cause you're the same

03-17-2003, 08:09 PM	#8
jill56 Registered User Join Date: Feb 2003 Location: Bassett, Va. Posts: 59	I will. The axle is 6 lug. Are you sure you don't need the springs because you can have them with it. __________________ If it ain't broke don't fix it!!! 1956 SWB Small Window Cab 1997 Camaro RS 1972 Chevelle Malibu 1990 S-10 Blazer 4X4

03-18-2003, 04:59 PM	#9
john j Registered User Join Date: Mar 2003 Location: Newport NH Posts: 216	No i just need the axel. If the pins are good can you deliver it to Danville? A friend up here has a brother in law that lives there. Then he will pick it up Easter weekend. I will be able to overnight him the money. Let me know john j __________________ you laugh at me cause i'm different ; i laugh at you cause you're the same

03-18-2003, 07:01 PM	#10
jill56 Registered User Join Date: Feb 2003 Location: Bassett, Va. Posts: 59	I think 1 pin is bad it wabbles a little bit, but I think the other one is good. I can easily drive to Danville. I usually go to Danville on fri. nights. Are you still interested? __________________ If it ain't broke don't fix it!!! 1956 SWB Small Window Cab 1997 Camaro RS 1972 Chevelle Malibu 1990 S-10 Blazer 4X4

03-18-2003, 08:17 PM	#11
john j Registered User Join Date: Mar 2003 Location: Newport NH Posts: 216	Do you believe putting new pins and bushings in will tighten it up? __________________ you laugh at me cause i'm different ; i laugh at you cause you're the same

03-18-2003, 08:45 PM	#12
jill56 Registered User Join Date: Feb 2003 Location: Bassett, Va. Posts: 59	I think so. __________________ If it ain't broke don't fix it!!! 1956 SWB Small Window Cab 1997 Camaro RS 1972 Chevelle Malibu 1990 S-10 Blazer 4X4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.